Integrated microfabricated systems including a purification module and an on-chip nano electrospray ionization interface for biological analysis

We report here on an integrated microfabricated device dedicated to the preparation of biological samples prior to their on-line analysis by electrospray ionization-mass spectrometry (ESI-MS). This microfluidic device is fabricated using the negative photoresist SU-8 by microtechnology techniques. The device includes a chromatographic module plus an ESI interface for MS. The chromatographic module is dedicated to sample purification and is based on a polymer monolithic phase which includes hydrophobic moieties. The ESI interface is integrated onto the chip and is based on a capillary slot. We present here the integration of these different modules onto a single system that is fabricated via a SU-8-based microtechnology route. We present also their testing for the purification of peptide samples. This started with a partial integration step with the combination of at least two of the modules (microsystem + monolith; microsystem + nib) and their test before the fabrication and testing of fully integrated microsystems.     

Determination of total mercury in environmental and biological samples by flow injection cold vapour atomic absorption spectrometry

A simple and accurate method has been developed for the determination of total mercury in environmental and biological samples. The method utilises an off-line microwave digestion stage followed by analysis using a flow injection system with detection by cold vapour atomic absorption spectrometry.

The method has been validated using two certified reference materials (DORM-1 dogfish and MESS-2 estuarine sediment) and the results agreed well with the certified values. A detection limit of 0.2 ng g⁻¹ Hg was obtained and no significant interference was observed. The method was finally applied to the determination of mercury in river sediments and canned tuna fish, and gave results in the range 0.1–3.0 mg kg⁻¹.     

An automated FTIR method for the routine quantitative determination of moisture in lubricants: An alternative to Karl Fischer titration

An accurate primary Fourier transform infrared (FTIR) method for the determination of moisture in mineral and ester based lubricants has been developed based on the extraction of moisture into dry acetonitrile. FTIR evaluation of acetonitrile extracts from new and used lubricants as well as common lubricant additives and contaminants which might co-extract indicated that phenolic constituents interfered significantly with moisture measurements. By measuring moisture at 3676 cm⁻¹ on the shoulder of the asymmetric OH stretching band, spectral interferences from extracted phenolic constituents were minimized. The spectra of calibration standards (0-2100 ppm), prepared by gravimetric addition of water to dry acetonitrile, were recorded in a 1000-μm CaF₂ transmission flow cell and produced linear standard curves having an S.D. of ∼±20 ppm. Lubricant sample preparation involved the vigorous shaking (20 min) of a 1:1.5 (w/v) mixture of lubricant and dry acetonitrile, centrifugation to separate the phases, acquisition of the FTIR spectrum of the upper acetonitrile layer, and subtraction of the spectrum of the dry acetonitrile used for extraction. A Continuous Oil Analyzer and Treatment (COAT^®) FTIR system was programmed to allow the automated analysis of acetonitrile extracts, and the methodology was validated by analyzing 58 new and used oils, independently analyzed by the Karl Fischer (KF) method. Linear regression of FTIR versus KF results for these oils produced a linear plot with a between-method S.D. of ±80 ppm. As implemented on the COAT^® system, this FTIR method is capable of analyzing 72 acetonitrile extracts/h and provides a high-speed alternative to the KF titrimetric procedures for the determination of water in lubricants.     

Inter- and intramolecular potential for the N-formylglycinamide-water system. A comparison between theoretical modeling and empirical force fields

An intramolecular NEMO potential is presented for the N-formylglycinamide molecule together with an intermolecular potential for the N-formylglycinamide-water system. The intramolecular N-formylglycinamide potential can be used as a building block for the backbone of polypeptides and proteins. Two intramolecular minima have been obtained. One, denoted as C5, is stabilized by a hydrogen bonded five member ring, and the other, denoted as C7, corresponds to a seven membered ring. The interaction between one water molecule and the N-formylglycinamide system is also studied and compared with Hartree-Fock SCF calculations and with the results obtained for some of the more commonly used force fields. The agreement between the NEMO and SCF energies for the complexes is in general superior to that of the other force fields. In the C7 region the surfaces obtained from the intramolecular part of the commonly used force fields are too flat compared to the NEMO potential and the ab initio calculations. We further analyze the possibility of using a charge distribution obtained from one conformation to describe the charge distribution of other conformations. We have found that the use of polarizabilities and generic dipoles can model most of the changes in charge density due to the different geometry of the new conformations, but that one can expect additional errors in the interaction energies that are of the order of 1 kcal/mol.     

Proton transfers in hydrogen bonded systems. Electron correlation effects in (H3NHOH2)+

The energetics of proton transfer between the N and O atoms of (H₃NHOH₂)⁺ are calculated via ab initio molecular orbital methods. A single-well potential is obtained at the equilibrium intermolecular separation Inclusion of electron correlation via the POL CI technique produces a less steep potential, reducing the energy barrier to proton transfer at greater NO distances.     

Strong solute-solute dispersive interactions in a protein-ligand complex

The contributions of solute-solute dispersion interactions to binding thermodynamics have generally been thought to be small, due to the surmised equality between solute-solvent dispersion interactions prior to the interaction versus solute-solute dispersion interactions following the interaction. The thermodynamics of binding of primary alcohols to the major urinary protein (MUP-I) indicate that this general assumption is not justified. The enthalpy of binding becomes more favorable with increasing chain length, whereas the entropy of binding becomes less favorable, both parameters showing a linear dependence. Despite the hydrophobicity of the interacting species, these data show that binding is not dominated by the classical hydrophobic effect, but can be attributed to favorable ligand-protein dispersion interactions.     

Phenylated polyimides: Diels-Alder reaction of biscyclopentadienones with dimaleimides

A series of phenylated polydihydrophthalimides has been synthesized by the Diels-Alder reactions of 3,3′-(oxydi-p-phenylene)bis(2,4,5-triphenylcyclopentadienone) and 3,3′-(p-phenylene)bis(2,4,5-triphenylcyclopentadienone) with N,N′-o-, -m-, and -p-phenylenedimaleimide. The polydihydrophthalimides were soluble in dimethylformamide (DMF) and had intrinsic viscosities that ranged from 0.33 to 1.01, the polymers were dehydrogenated thermally and chemically to afford the corresponding phenylated polyphthalimides. The totally aromatic polyimides were also soluble in DMF but had intrinsic viscosities only as high as 0.41. The thermogravimetric analyses of the polyphthalimides showed breaks near 530°C in air and in nitrogen atmospheres.     

Project Management Duration/Resource Tradeoff Analysis: an Application of the Cut Search Approach

The paper presents an application oriented procedure for solving the project management duration/resource tradeoff problem. A procedure is presented for reducing a project from a normal to a crash duration state at a minimum amount of additional resource expenditure assuming a linear utilization functions. The procedure is network based using a graphical Cut Search Approach to locate the minimal resource level at each reduction in total project duration. Activity-on-arc networks and flow networks are utilized. The paper is presented for practical application and for conceptual development as compared to a theoretical treatment.     

Liquid chromatographic determination of diminazene diaceturate (Berenil) in raw bovine milk

A simple liquid chromatographic (LC) method is presented for the determination of diminazene (DZ) in raw bovine milk. DZ is extracted from raw milk by chilled aqueous centrifugation and is isolated from milk components on a cyano solid-phase extraction column. DZ is eluted by using a methanol-ion pairing reagent. A Phenomenex LUNA CN column and an acetonitrile-buffered mobile phase with a counter ion are used for gradient LC. The LC effluent is monitored at a detection wavelength of 372 nm by using a deuterium lamp. Under the parameters described, the retention time of DZ is 8-10 min with a peak area response of 6.5 mAU/ng. The method demonstrated excellent precision over all levels tested (25-400 ppb) with an overall average recovery of 90.4 +/- 14.5%. The method is applicable to the monitoring of milk for DZ residues at the 25 ppb level with a limit of quantitation of 10 ppb.