Theoretical studies on the conformation of saccharides

Conformations of 2-methoxytetrahydropyran as a model for the six-membered ring in aldopyranosides have been calculated by the PCILO method using the algorithm of the conjugated gradient to optimize the geometry. The calculated geometry of the fourteen basic forms of 2-methoxytetrahydropyran was found to be in agreement with the available data obtained by X-ray diffraction of pyranosides. The results indicate differences in the geometry of 2-methoxytetrahydropyran resulting from the change of the axial vs. equatorial position of the methoxyl group. These changes are particularly meaningful in the values of bond angles and they are in agreement with the anomeric and exoanomeric effects. The experimentally found differences in the energies of an axial (⁴ C ₁) and equatorial (¹ C ₄) conformer, G = 2.9–3.7 kJ/mol, and the dipole moment, = 1.20 ± 0.05 D (1D = 3.33 10^–30mAs) agree well with the calculated values E = 3.18 kJ/mol and <> = 1.18 D which, in turn, suggest that the axial conformer is preferred over the equatorial one by a ratio a:e = 78:22.     

Mechanism of the thermal decomposition of hydrophosphites of lithium,sodium and potassium

The thermal decomposition of some M ₂ ^I HPO₃ (M-Li, Na, K) phosphites under nitrogen atmosphere was investigated. A stepwise mechanism of thermal decomposition has been proposed.

---

Zusammenfassung Es wurde die thermische Zersetzung von Phosphiten M ₂ ^I HPO₃ (M-Li, Na, K) in Stickstoffatmosphere untersucht. Die Schritte des Mechanismus der thermischen Zersetzung wurden vorgeschlagen.

     

Flow injection analysis : Part VI. The determination of phosphate and chloride in blood serum by dialysis and sample dilution

The rapid determination of chloride and inorganic phosphate in blood serum based on continuous flow spectrophotometry was adapted to Flow Injection Analysis by applying dialysis as well as differential dilution of the injected samples. In addition to the manual injection procedure, an automated microsampling unit was developed and used. By continuous dialysis, chloride could be determined reproducibly at a sampling rate of 125 samples per hour at sample volumes of 60 μl or less. A similar sampling rate and high precision were obtained for the determination of inorganic phosphate by using differential dilution.     

Flow injection analysis. principles,applications and trends

The basic principles of Flow Injection Analysis are outlined. The parameters governing the dispersion of the injected sample zone in the system are discussed, and it is demonstrated how these parameters can be manipulated in order to suit the requirements of an individual analytical procedure. A number of examples illustrating the practical application of f.i.a. are described, comprising the use of automated, stopped-flow, merging-zones, extraction techniques as well as f.i.a. scanning and methods based on intermittent pumping. Updated lists on f.i.a. procedures published and species that can be determined by f.i.a. are included.     

Synthesis of fused imidazo-pyridine and -azepine derivatives by sequential van Leusen/Heck reactions

Fused imidazo-pyridine and -azepine derivatives were synthesized using a sequential van Leusen/intramolecular Heck protocol. The combination of a multicomponent reaction followed by an intramolecular carbon-carbon bond forming reaction generates heterocycles of significant molecular complexity from readily available starting materials in just two steps.     

Influence of the pyridine methyl substituent position on the chemical changes of the NCS groups in the thermal decomposition of coordination compounds of the type Cu(NCS)2L2

The influence of the position of the CH₃ group in picoline and lutidine ligands on the degree of chemical change of the NCS groups in coordination compounds of the type Cu(NCS)₂L₂ (whereL=2-, 3- and 4-picoline, and 2,3-, 2,4-, 2,5-, 2,6-, 3,4- and 3,5-lutidine) is dealt with. The most marked effect of the CH₃ group is found to be exerted in position 4. This effect of the methyl group on the degree of chemical change points to the mutual influence of the ligands in coordination compounds of Cu(II).

---

Zusammenfassung Der Artikel befaßt sich mit dem Einfluß der Lage der CH₃ Gruppe in Pikolinen und Lutidinen als Liganden auf den Grad der chemischen Änderungen der Gruppen NSC in Koordinationsverbindungen des Typs Cu(NCS)₂L₂ (L=2-, 3- und 4-Pikoline, 2,3-, 2,4-, 2,5-, 2,6-, 3,4- und 3,5-Lutidine). Der ausgeprägteste Effekt der CH₃ Gruppe wurde in der Position 4 beobachtet. Dieser Einfluß der Methylgruppe auf das Ausmaß der chemischen Änderungen deutet auch auf die gegenseitige Wirkung der Liganden in Koordinationsverbindungen von Cu(II).

---

Résumé L'article a trait à l'influence de la position du groupe CH₂ dans les picolines et lutidines, en tant que ligands, sur le degré des changements chimiques des groupes SCN dans les composés de coordination du type Cu(SCN)₂L₂ (L=2-, 3 et 4-picoline, 2,3-, 2,4-,2,5-, 2,6-, 3,4- et 3,6-lutidine). L'effet le plus prononcé du groupe CH₃ s'observe en position 4. Cette influence du groupe méthyle sur le degré des changements chimiques indique aussi l'influence mutuelle des ligands dans les composés de coordination du Cu(II).

---

- , , NCS Cu(NCS)₂,L₂, L=2-, 3- 4- , 2.3-, 2.4-, 2.5-, 2.6-, 3.4- 3.5-. , 4. Cu(II).

     

Improvement of electron capture efficiency by resonant excitation

A novel pulse sequence improving the efficiency for electron capture dissociation (ECD) of an unmodified Fourier transform ion cyclotron resonance (FTICR) mass spectrometer by more than an order of magnitude is presented. Commercially available FTICR instruments are usually equipped with a filament-based electron source producing an electron beam that has a rather small cross section. An ideal overlap between the rotating ion cloud and the electron beam appears to be a prerequisite for a high ECD efficiency. A reduced interception of the ion cloud and the electron beam is probably due to the contribution of the magnetron motion to the trajectory of the ions, resulting in a precession about the z-axis of the instrument. By increasing the kinetic energy and therefore increasing the cyclotron radii of the precursor ions by resonant excitation, the overlap of the rotating ion cloud with the electron beam is improved. By use of this protocol the efficiency of electron capture is substantially increased and consequently the acquisition time of ECD spectra is reduced significantly. The capability of resonant excitation of the precursor ions during the irradiation with electrons is demonstrated for standard peptides. This approach is particularly valuable for analysis and characterization of O-glycosylated peptides. In addition to amino acid sequence information, the attachment site of the labile glycan moiety is determined, and also radical-site-induced fragmentations of the glycosidic bonds are observed.     

The first decade of flow injection analysis: from serial assay to diagnostic tool

Some 804 papers on flow injection analysis published to the end of May 1985 are summarized. Past trends are discussed and new developments are briefly outlined.The paper entitled “Flow Injection Analysis. Part 1. A New Concept of Fast Continuous Flow Analysis” [1], which appeared in August 1975, was the first of some 804 papers [1/2-804] published on flow injection analysis (f.i.a.) during the past ten years. In the present contribution, all these papers are collected to record the status quo of the general method and to reveal the present trends in applications of f.i.a. and in the geographical distribution of the research activities. Important concepts and technological innovations are reviewed and the future development of f.i.a. is briefly outlined.     

Development and prevalidation of a method for phenol determination by solid-phase spectrophotometry

A simple, sensitive and rapid solid-phase spectrophotometric procedure was developed for the determination of traces of phenol with 4-aminoantipyrine as a reagent (AAP-SPS), and the optimal experimental conditions were established. This method was performed by sorption and direct absorbance measurements of the product phenol-AAP sorbed on the anion-exchanger Dowex 1-X4 (0.2 g) at 495 nm (absorption maximum) and 700 nm (non-absorption wavelength). The sensitivity offered by the AAP-SPS procedure was higher by a factor of 40 compared with the respective conventional spectrophotometric method. Metrological characteristics were established using a prevalidation strategy. The AAP-SPS procedure is characterized by a linear calibration function in the working range of 0.05–0.50 μmol, low standard deviation of procedure (±0.012), low limit of determination (0.021 μmol), and favorable random (±0.85 to ±11.27%) and systematic deviations (−4.55 to +11.50%). Moreover, the accuracy of the system investigated by the recovery test is acceptable (99–102%). Favorable working and performance characteristics make the new SPS method ideal for phenol monitoring in pharmaceutical preparations as well as other matrices.     

Isotachophoretic analysis of the dihydrofolate reductase reaction in the presence of methotrexate and ascorbic acid

The antifolate methotrexate (MTX) is widely used in cancer chemotherapy. In this study, we show that MTX (MTX-Glu1) and MTX-polyglutamates (MTX-Glu2-5) strongly inhibited the growth of the leukemic cell line MOLT-4. This effect, however, was mitigated by ascorbic acid. We investigated whether ascorbic acid is able to reduce dihydrofolic acid (DHF) to tetrahydrofolic acid (THF) directly or by circumventing the MTX inhibition of dihydrofolate reductase (DHFR). The inhibition of this NADPH-dependent reduction of DHF by MTX-Glun in the absence or presence of ascorbate, was determined by analytical isotachophoresis. Using 0.01 M HCl/histidine, pH 6.0, as a leading electrolyte (L) and 0.005 M 2-(N-morpholino)ethanesulfonic acid (MES)/histidine, pH 6.0, as a terminating electrolyte (T), MTX-Glun derivatives including MTX-Glu1 could be easily separated, whereas the quantitative estimation of THF was not possible. A quantitative characterization of the DHFR reaction by measuring NADPH, NADP+ and ascorbate was achieved with another system (L: 0.01 M HCI/beta-alanine, pH 3.73; T: 0.01 M caproic acid, pH 3.27). Nanomolar concentrations of MTX-Glu1-5 inhibited consumption of NADPH and production of NADP+. Ascorbic acid was not able to reduce DHF, neither directly nor after inhibition of DHFR by MTX. However, ascorbic acid seemed to diminish the oxidation of THF and this may account for its capacity to reduce the inhibitory effect of MTX on MOLT-4 cells.