Dynamics of a triphenylene discotic molecule,HAT6, in the columnar and isotropic liquid phases

Discotic molecules have planar, disklike polyaromatic cores that can self-assemble into "molecular wires". Highly anisotropic charge transfer along the wires arises when there is sufficient intermolecular overlap of the pi-orbitals of the molecular cores. Discotic materials can be applied in molecular electronics, field-effect transistors, and-recently with record quantum efficiencies-photovoltaics (Schmidt-Mende, L.; Fechtenk?tter, A.; Müllen, K.; Moons, E.; Frien, R. H.; MacKenzie, J. D. Science 2001, 293, 1119). A combination of quasielastic neutron scattering (QENS) measurements with molecular dynamics simulations on the discotic molecule hexakis(n-hexyloxy)triphenylene (HAT6) shows that the dynamics of the cores and tails of discotic molecules are strongly correlated. Core and tail dynamics are not separated, the system being characterized by overall in-plane motion, on a time scale of 0.2 ps, and softer out-of-plane motions at 7 ps. Because charge transfer between the molecules is on similar time scales, these motions are relevant for the conducting properties of the materials. Both types of motion are dominated by van der Waals interactions. Small-amplitude in-plane motions in which the disks move over each other are almost entirely determined by tail/tail interactions, these also playing an important role in the out-of-plane motion. The QENS measurements reveal that these motions are little changed by passing from the columnar phase to the isotropic liquid phase, just above the clearing temperature. The model of four HAT6 molecules in a column reproduces the measured QENS spectrum of the liquid phase, suggesting that correlations persist within the liquid phase over about this number of disks.     

Recent advances in microwave-assisted combinatorial synthesis and library generation

Progress and developments made in microwave-assisted combinatorial synthesis and library production since 2002 are reviewed. The use of microwave technology in both solution and solid phase synthesis is discussed with special reference to agrochemical applications where appropriate.     

Characterization of amyloidogenic immunoglobulin light chains directly from serum by on-line immunoaffinity isolation

Primary systemic amyloidosis (AL) is characterized by the overproduction of immunoglobulin light chain proteins by a monoclonal, terminally differentiated B-lymphocyte or plasma cell clone. The free immunoglobulin light chains are deposited in an abnormal conformation as amyloid in a variety of organs in the body. The mechanism of amyloid formation is not well understood, but appears to be associated with some form of cleavage of the immunoglobulin light chain with subsequent aggregate formation. In an attempt to characterize the structure of amyloid-forming light chain proteins we developed an on-line immunoaffinity purification and subsequent characterization of free kappa and free lambda immunoglobulin light chains by electrospray ionization mass spectrometry. The methodology is totally automated and requires 20 micro L of serum. Mass spectral analysis of Bence Jones proteins under non-denaturing conditions was also utilized to examine the tertiary and quaternary structure of light chain proteins and clearly shows covalent dimer formation of lambda type light chain. This type of on-line assay may prove helpful in elucidating distinguishing features capable of discriminating AL from benign monoclonal gammopathies of undetermined significance as well as diagnosing AL.     

A Formal Total Synthesis of (+)-Methyl Trachyloban-18-oate and (+)-Methyl 16-Oxo-17-norkauran-18-oate: Regio- and Diastereoselective Preparation of Methyl (13S)-13-Hydroxyisoatisiren-18-oate from (−)-Abietic Acid

A novel preparation of methyl (13S)-13-hydroxyisoatisiren-18-oate ( 4 ), a key-intermediate in a synthesis of (+)-methyl trachyloban-18-oate ((+)- 1 ), from (?)-abietic acid, is described. Since (?)- 1 has been previously converted into (?)-methyl 16-oxo-17-norkauran-18-oate ((?)- 16 ), our preparation of 4 constitutes also a formal total synthesis, from (?)-abietic acid, of (+)- 16 . Key steps in this approach were the allene photoaddition to podocarp-8(14)-en-13-one ( 5 ) and the conversion of the endo-toluene-4-sulfonate 11 into the exo-benzoate 12b .     

pH dependent self-assembly of dimetallic lanthanide complexes

pH dependent self-association has been observed in a series of DO3A-derived lanthanide complexes bearing a carboxylate group that can act as a bridging ligand at high pH, switching on the luminescence from the lanthanide.     

Hamaker constants in integrated circuit metalization

A new method for determining Hamaker constants was examined for materials of interest in integrated circuit manufacture. An ultra-high vacuum atomic force microscope and an atomic force microscope operated in a nitrogen environment were used to measure the interaction forces between metals, dielectrics, and barriers used during the metalization portion of integrated circuit manufacturing. The materials studied included copper, silver, titanium nitride, silicon dioxide, poly(tetrafluoroethylene), and parylene-N. Spheres coated with a material of interest were mounted on AFM cantilevers and brought into contact with substrates of interest. The interaction force was measured as the cantilever approached the substrate but before the two surfaces came into contact, and also when the particle was pulled out of contact with the substrate. The Hamaker constant calculation from the contact measurement is based on an adhesion model that quantifies the contribution of geometrical, morphological and mechanical properties of materials to the measured adhesion force. Hamaker constants determined with this new approach were compared with values found by using the Derjaguin approximation for a sphere to describe the interaction force as the cantilever approaches the surface. Both approaches produced similar values for most of the systems studied, with variations of less than 10%.     

On-line on-chip post-column derivatisation reactions for pre-ionisation of analytes and cluster analysis in gradient micro-liquid chromatography/electrospray mass spectrometry

A system is presented that demonstrates the principle of on-line and on-chip post-column derivatisation reactions in micro-high-performance liquid chromatography (micro-HPLC) hyphenated to electrospray time-of-flight mass spectrometry (ESI-TOFMS). In this micro-HPLC-chip-MS set-up, the analytes are separated using gradient micro-HPLC and subsequently derivatised on-chip and detected. One of the major limitations of MS detection is its dependency on the degree of ionisation, which is widely variable and compound-specific. Optimising and controlling the degree of ionisation in a simple manner would allow MS detection to be truly generic. One way of achieving this is by pre-ionisation of analytes using simple derivatisation procedures that are both rapid and quantitative. Performing this in situ on the system described here overcomes issues of sample handling and efficiency losses when time-consuming "bench chemistry" is necessary prior to analysis. The power of the system is demonstrated by the separation of primary and secondary amines, which are subsequently derivatised with a positively charged phosphonium complex and detected in an enhanced manner. Typically, molecular cations (M(+)) are detected showing that the ionisation process is dominated by the phosphonium species, leading to more constant ionisation for a variety of compounds. In addition, stable isotopically labelled ((12)C/(13)C)-phosphonium reagent is used for the reactions, allowing for inherent signal/noise (S/N) improvement and automated data processing using cluster analysis. A similar reaction scheme is used for the derivatisation of ketones and aldehydes, also demonstrating dramatic increases in sensitivity, especially with increasing temperature. Minimal loss in chromatographic fidelity in terms of retention times is observed by the introduction of the micromixer chip into the system. Optimal flow rates in micro-HPLC and ESI-MS are compatible with flow rates for the chip as well as a multitude of in-line optical detectors including UV and fluorescence. In addition, the micromixer chip can be positioned pre-column if preferred. The system is robust, easily fully automated and applicable to a wide variety of reactions. The system has a major advantage in its simple robust connection to the "normal scale" outside world.     

RECOVERY FROM DAMAGE INDUCED BY ACRIDINE PLUS NEAR-ULTRAVIOLET LIGHT IN ESCHERICHIA COLI

Abstract— Escherichia coli cells treated with sublethal doses of acridine plus near-UV light exhibit an effective split-dose recovery response that requires an incubation period of about 30–45 min. Studies of the metabolic requirements for split-dose recovery revealed the following: (a) DNA synthesis is not required for split-dose recovery; (b) inhibition of electron transport or protein synthesis reduces the efficiency of split-dose recovery by about one-half; (c) inhibition of phospholipid synthesis or cell wall synthesis completely eliminates the split-dose recovery response. These results suggest an involvement of membrane repair mechanisms in response to damage by acridine plus near-UV light. Additional evidence for such a process was provided by more direct assays for membrane recovery. It was found that cells treated with sublethal doses of acridine plus near-UV light are sensitive to low concentrations of detergents, and lose that sensitivity upon incubation. Likewise, treated cells are susceptible to lethal osmotic shock, but can recover from this susceptibility if incubated after treatment but prior to exposure to low osmotic conditions. Based on accumulating evidence, we propose that E. coli cells are capable of repairing membrane damage resulting from exposure to acridine plus near-UV light.     

The crystal structure of 4,4′-dipyridinium tetracyanooxothiocyanatorhenate(V)

Summary The light purple crystals of (4,4-dipyridinium) [ReO(NCS)(CN)₄] crystallize in the monoclinic space group P2₁/m witha=6.615(1),b=16.043(1),c=8.405(1) Å,=93.20(1)°,z=2. The anisotropic refinement of the 1770 observed reflections converged to R=0.041.The [ReO(NCS)(CN)₄]^2– ion has a distorted octahedral geometry. The rhenium atom is displaced by 0.30 Å out of the plane formed by the four carbon atoms towards the terminal oxo ligand. Bond distances: Re=0 =1.67(1), Re–N=2.12(1) and Re–C_av=2.11(1)Å. The thiocyanate ion is nitrogen bonded to the rhenium atom.     

Enantioselective Synthesis: Steric and electronic effects of the substrates upon stereoselectivity in the gold(I)-catalyzed aldol reaction with chiral ferrocenylamine ligands,preliminary communication

Enantioselectivity in the gold(I)-catalyzed aldol reaction with chiral ferrocenylamine ligands is strongly dependent upon both the steric and electronic effects of the substrates. In the reaction of pyridine-2-, 3-, and 4-carbaldehydes with ethyl 2-isocyanoacetate, surprisingly and significantly different enantioselectivities were observed in the formation of the cis- and trans-dihydro-oxazoles that must be due to electronic rather than steric effects. The first example of double stereodifferentiation in the gold(l)-catalyzed aldol reaction is reported.