Synthesis of Highly Substituted γ‐Butyrolactones by a Gold‐Catalyzed Cascade Reaction of Benzyl Esters

Easily accessible benzylic esters of 3‐butynoic acids in a gold‐catalyzed cyclization/rearrangement cascade reaction provided 3‐propargyl γ‐butyrolactones with the alkene and the carbonyl group not being conjugated. Crossover experiments showed that the formation of the new C?C bond is an intermolecular process. Initially propargylic–benzylic esters were used, but alkyl‐substituted benzylic esters worked equally well. In the case of the propargylic–benzylic products, a simple treatment of the products with aluminum oxide initiated a twofold tautomerization to the allenyl‐substituted γ‐butyrolactones with conjugation of the carbonyl group, the olefin, and the allene. The synthetic sequence can be conducted stepwise or as a one‐pot cascade reaction with similar yields. Even in the presence of the gold catalyst the new allene remains intact.     

The synthesis and characterisation of novel dimethyl- and diphenyl-silanediolates

Dimethyl- and diphenylsilanediolates are key intermediates in the preparation of dimethyl- and diphenyl-siloxane polymers. Both dimethyl- and diphenylsilanediolates R₂Si(OM)₂, where R = Me or Ph, and M = Li, Na and K were synthesised by the reaction between dimethyl- and diphenylsilanediol and a metal or metal hydride (M/MH where M = Li, Na and K). The silanediolates were characterised by ²⁹Si, ¹³C and ¹H NMR, FTIR and mass spectroscopy.     

Determination of polybrominated biphenyls in Tasmanian devils (Sarcophilus harrisii) by gas chromatography coupled to electron capture negative ion tandem mass spectrometry or electron ionization high‐resolution mass spectrometry

Two gas chromatography/mass spectrometry (GC/MS) methods for the determination of polybrominated biphenyls (PBBs) by isotope dilution analysis (IDA) using ¹³C₁₂‐PBB 153 in the presence of polybrominated diphenyl ethers (PBDEs) were compared. Recovery of ¹³C₁₂‐PBB 153 which was added to the extracted lipids before sample purification was commenced ranged from 88–117% (mean value 98.2 ± 8.9%). Nevertheless, IDA analysis of PBBs using ¹³C₁₂‐labelled congeners is limited by the potential co‐elution of PBBs with polybrominated diphenyl ethers (PBDEs). The pair PBB 153 and BDE 154 was inspected since M⁺ and [M–2Br]⁺ ions of ¹³C₁₂‐PBB 153 and BDE 154 were only separated by 4 u. Gas chromatography/electron ionization high‐resolution mass spectrometry with selected ion monitoring (GC/EI‐HRMS‐SIM) was suitable when m/z 475.7449 and m/z 477.7429 were used for ¹³C₁₂‐PBB 153 because they are below the monoisotopic peak of the [M–2Br]⁺ fragment ion of hexaBDEs at m/z 479.7. Gas chromatography/electron capture negative ion tandem mass spectrometry selected reaction monitoring (GC/ECNI‐MS/MS‐SRM) measurements could be applied because ¹³C₁₂‐PBB 153 and BDE 154 were separated by GC on a 25‐m Factor Four CP‐Sil 8MS column. Comparative measurements with GC/EI‐HRMS‐SIM and GC/ECNI‐MSMS‐SRM were carried out with samples of Tasmanian devils from Tasmania (Australia), an endangered species due to a virus epidemy which has already proved fatal for half of the population. Both techniques verified concentrations of PBB 153 in the range 0.3–11 ng/g lipids with excellent agreement of the levels in all but two samples. The PBB residue pattern demonstrated that PBB pollution originated from the previous discharge with technical hexabromobiphenyl which is dominated by PBB 153. Other congeners such as PBB 132 and PBB 138 were detected in the Tasmanian devils but the proportions relative to PBB 153 were lower than in the technical product. Samples of healthy and affected Tasmanian devils showed no significant difference in the PBB pollution level. The PBB concentrations in the Tasmanian devils were significantly below those causing toxic effects. On the other hand, PBB concentrations were one level or even higher than PBDEs. Copyright © 2008 John Wiley & Sons, Ltd.     

Formation of Mixed Ionic Complementary Peptide Fibrils

Summary: Two peptides (FEFEFKFK and HHHHHHFEFEFKFK) have been synthesised and their phase diagrams mapped out as a function of concentration and temperature. Both peptides formed self-supporting fibrillar hydrogels above a similar critical molar gelation concentration with a fibril diameter corresponding to the length of the fully stretched monomer. Mixing the peptides in a 9:1 ratio of FEFEFKFK to histadine functionalized FEFEFKFK in the presence of nanogold particles (binds to the histadine groups) resulted in thicker fibres suggesting that two fibrils associate together to form a fibre. TEM studies revealed that the gold particles were distributed throughout the hydrogel and adjacent to both sides of the fibrillar structures with an average distance between particles of 21 nm. It is postulated that the peptides form anti-parallel beta sheet fibrils that associate together via π-stacking interactions between the imidazole side chains of the histadine groups to form a fibre, where on average 1 in every 44 peptides is functionalized.     

原子力显微镜针尖诱导聚氧乙烯熔体结晶的研究

原子力显微镜(AFM)是研究高分子结晶行为的一种重要实验手段.在使用AFM原位观察高分子结晶时,为保证能真实地反映结晶过程,一个必须注意的问题是要避免AFM针尖的影响.与此同时,人们考察了在AFM扫描时针尖诱导高分子结晶成核的情况.若使用AFM接触模式(contactmode),扫描时容易造     

2-Position base-modified analogues of adenophostin A as high-affinity agonists of the D-myo-inositol trisphosphate receptor: in vitro evaluation and molecular modeling

Adenophostin A (AdA) is a potent agonist of the d-myo-inositol 1,4,5-trisphosphate receptor (Ins(1,4,5)P3R). Various 2-aminopurine analogues of AdA were synthesized, all of which (guanophostin 5, 2,6-diaminopurinophostin 6, 2-aminopurinophostin 7, and chlorophostin 8) are more potent than 2-methoxy-N6-methyl AdA, the only benchmark of this class. The 2-amino-6-chloropurine nucleoside 11, from Vorbrüggen condensation of 2-amino-6-chloropurine with appropriately protected disaccharide, served as the advanced common precursor for all the analogues. Alcoholysis provided the precursor for 5, ammonolysis at high temperature the precursor for 6, and ammonolysis under mild conditions the precursor for synthesis of 7 and 8. For 8, the debenzylation of precursor leaving the chlorine untouched was achieved by judicious use of BCl3. The reduced potency of chlorophostin 8 and higher potency of guanophostin 5 in assays of Ca2+ release via recombinant Ins(1,4,5)P3R are in agreement with our model suggesting a cation-pi interaction between AdA and Ins(1,4,5)P3R. The similar potencies of 2,6-diaminopurinophostin (6) and 2-aminopurinophostin (7) concur with previous reports that the 6-NH2 moiety contributes negligibly to the potency of AdA. Molecular modeling of the 2-amino derivatives suggests an interaction between the carboxylate side chain of Glu505 of the receptor and the 2-NH2 of the ligand, but for 2-methoxy-N6-methyl AdA the carboxylate group of Glu505 is deflected away from the methoxy group. A helix-dipole interaction between the 1-phosphate of Ins(1,4,5)P3 and the 2'-phosphate of AdA with alpha-helix 6 of Ins(1,4,5)P3R is postulated. The results support a proposed model for high-affinity binding of AdA to Ins(1,4,5)P3R.     

A comparison of the binding of metal complexes to duplex and quadruplex DNA

Electrospray ionisation mass spectrometry (ESI-MS) and circular dichroism (CD) spectroscopy were used to compare the binding of mononuclear nickel, ruthenium and platinum complexes to double stranded DNA (dsDNA) and quadruplex DNA (qDNA). CD studies provided evidence for the binding of intact complexes of all three metal ions to qDNA. ESI mass spectra of solutions containing platinum or ruthenium complexes and qDNA showed evidence for the formation of non-covalent complexes consisting of intact metal molecules bound to DNA. However, the corresponding spectra of solutions containing nickel complexes principally contained ions consisting of fragments of the initial nickel molecule bound to qDNA. In contrast ESI mass spectra of solutions containing nickel, ruthenium or platinum complexes and dsDNA only showed the presence of ions attributable to intact metal molecules bound to DNA. The fragmentation observed in mass spectral studies of solutions containing nickel complexes and qDNA is attributable to the lower thermodynamic stability of the former metal complexes relative to those containing platinum or ruthenium, as well as the slightly harsher instrumental conditions required to obtain spectra of qDNA. This conclusion is supported by the results of tandem mass spectral studies, which showed that ions consisting of intact nickel complexes bound to qDNA readily undergo fragmentation by loss of one of the ligands initially bound to the metal. The ESI-MS results also demonstrate that the binding affinity of each of the platinum and ruthenium complexes towards qDNA is significantly less than that towards dsDNA.     

Heterometallic integer-spin analogues of S = 9/2 Mn4 cubane single-molecule magnets

A family of distorted heterometallic cubanes, [Mn (III) 3Ni (II)(hmp) 3O(N 3) 3(O 2CR) 3], where O 2CR (-) is benzoate ( 1), 3-phenylpropionate ( 2), 1-adamantanecarboxylate ( 3), or acetate ( 4) and hmp (-) is the anion of 2-pyridinemethanol, was synthesized and structurally as well as magnetically characterized. These complexes have a distorted-cubane core structure similar to that found in the S = 9/2 Mn 4 cubane family of complexes. Complexes 1, 3, and 4 crystallize in rhombohedral, hexagonal, and cubic space groups, respectively, and have C 3 molecular symmetry, while complex 2 crystallizes in the monoclinic space group Cc with local C 1 symmetry. Magnetic susceptibility and magnetization hysteresis measurements and high-frequency electron paramagnetic resonance (HFEPR) spectroscopy established that complexes 1-4 have S = 5 spin ground states with axial zero-field splitting (ZFS) parameters ( D) ranging from -0.20 to -0.33 cm (-1). Magnetization versus direct-current field sweeps below 1.1 K revealed hysteresis loops with magnetization relaxation, definitely indicating that complexes 1-4 are single-molecule magnets that exhibit quantum tunneling of magnetization (QTM) through an anisotropy barrier. Complex 2 exhibits the smallest coercive field and fastest magnetization tunneling rate, suggesting a significant rhombic ZFS parameter ( E), as expected from the low C 1 symmetry. This was confirmed by HFEPR spectroscopy studies on single crystals that gave the following parameter values for complex 2: gz = 1.98, gx = gy = 1.95, D = -0.17 cm (-1), B 4 (0) = -6.68 x 10 (-5) cm (-1), E = 6.68 x 10 (-3) cm (-1), and B 4 (2) = -1.00 x 10 (-4) cm (-1). Single-crystal HFEPR data for complex 1 gave g z = 2.02, gx = gy = 1.95, D = -0.23 cm (-1), and B 4 (0) = -5.68 x 10 (-5) cm (-1), in keeping with the C 3 site symmetry of this Mn 3Ni complex. The combined results highlight the importance of spin-parity effects and molecular symmetry, which determine the QTM rates.     

Synthesis of (+)-uniflorine a: a structural reassignment and a configurational assignment

The total synthesis of (+)-uniflorine A has allowed for the structural reassignment and the configurational assignment of the alkaloid (-)-uniflorine A from a 1,2,6,7,8-pentahydroxyindolizidine structure to (-)-(1 R,2 R,3 R,6 R,7 S,7a R)-1,2,6,7-tetrahydroxy-3-hydroxymethylpyrrolizidine (6- epi-casuarine).     

Oxygen isotope analysis of carbonates in the calcite-dolomite-magnesite solid-solution by high-temperature pyrolysis: initial results

Accurate and efficient measurement of the oxygen isotope composition of carbonates (delta(C) (18)O) based on the mass spectrometric analysis of CO(2) produced by reacting carbonate samples with H(3)PO(4) is compromised by: (1) uncertainties associated with fractionation factors (alpha(CO)(2)C) used to correct measured oxygen isotope values of CO(2)(delta(CO(2)(18)O) to delta(C) (18)O; and (2) the slow reaction rates of many carbonates of geological and environmental interest with H(3)PO(4). In contrast, determination of delta(C) (18)O from analysis of CO produced by high-temperature (>1400 degrees C) pyrolytic reduction, using an elemental analyser coupled to continuous-flow isotope-ratio mass spectrometry (TC/EA CF-IRMS), offers a potentially efficient alternative that measures the isotopic composition of total carbonate oxygen and should, therefore, theoretically be free of fractionation effects. The utility of the TC/EA CF-IRMS technique was tested by analysis of carbonates in the calcite-dolomite-magnesite solid-solution and comparing the results with delta(C) (18)O measured by conventional thermal decomposition/fluorination (TDF) on the same materials. Initial results show that CO yields are dependent on both the chemical composition of the carbonate and the specific pyrolysis conditions. Low gas yields (<100% of predicted yield) are associated with positive (>+0.2 per thousand) deviations in delta(C(TC/EA) (18)O compared with delta(C(TDF) (18)O. At a pyrolysis temperature of 1420 degrees C the difference between delta(C) (18)O measured by TC/EA CF-IRMS and TDF (Delta(C(TC/EA,TDF) (18)O) was found to be negatively correlated with gas yield (r = -0.785) and this suggests that delta(C) (18)O values (with an estimated combined standard uncertainty of +/-0.38 per thousand) could be derived by applying a yield-dependent correction. Increasing the pyrolysis temperature to 1500 degrees C also resulted in a statistically significant correlation with gas yield (r = -0.601), indicating that delta(C) (18)O values (with an estimated uncertainty of +/-0.43 per thousand) could again be corrected using a yield-dependent procedure. Despite significant uncertainty associated with TC/EA CF-IRMS analysis, the magnitude of the uncertainty is similar to that associated with the application of poorly defined values of alpha(CO)(2), (C) used to derive delta(C) (18)O from delta(CO(2) (18)O measured by the H(3)PO(4) method for most common carbonate phases. Consequently, TC/EA CF-IRMS could provide a rapid alternative for the analysis of these phases without any effective deterioration in relative accuracy, while analytical precision could be improved by increasing the number of replicate analyses for both calibration standards and samples. Although automated gas preparation techniques based on the H(3)PO(4) method (ISOCARB, Kiel device, Gas-Bench systems) have the potential to measure delta(CO)(2) (18)O efficiently for specific, slowly reacting phases (e.g. dolomite), problems associated with poorly defined alpha(CO)(2), (C) remain. The application of the Principle of Identical Treatment is not a solution to the analysis of these phases because it assumes that a single fractionation factor may be defined for each phase within a solid-solution regardless of its precise chemical composition. This assumption has yet to be tested adequately.