Determination of lincomycin and tylosin residues in honey by liquid chromatography/tandem mass spectrometry

A simple and rapid analytical method was developed for the determination of lincomycin and tylosin residues in honey as part of field studies examining the efficacy and target animal safety of these antibiotics to control American foulbrood disease in honey bees. Residues of the antibiotics were determined using liquid chromatography/electrospray ionization tandem mass spectrometry (LC/ESI-MS/MS). Honey samples were diluted and injected directly into the LC/MS/MS system without additional cleanup by solid-phase extraction or liquid-liquid partitioning. A six-port valve system was utilized to selectively route eluant from the LC column into the mass spectrometer only during a relatively short portion of the chromatographic run corresponding to the elution of the analytes of interest. Minimal contamination of the MS source chamber was observed despite the analysis of large numbers of samples. Using internal standard quantitation, excellent accuracy and precision were obtained with no apparent matrix-to-matrix variation. Based on the analysis of fortified replicates, the mean percent deviation from the theoretical concentration and the percent relative standard deviation were both less than 10% for tylosin over an analytical range of 10-1000 microg/kg. Slightly higher mean percent deviations and relative standard deviations were observed for the analysis of lincomycin in fortified replicate samples. The method detection limits were determined to be 5 and 2 microg/kg for lincomycin and tylosin, respectively.     

Structure determination of homoleptic AuI, AgI, and CuI aryl/alkylethynyl coordination polymers by X-ray powder diffraction

This article describes the structure determination of five homoleptic d(10) metal-aryl/alkylacetylides [RC triple bond CM] (M=Cu, R=tBu 1, nPr 2, Ph 3; R=Ph, M=Ag 4; Au 5) by using X-ray single-crystal and powder diffraction. Complex 1.C6H6 reveals an unusual Cu20 catenane cluster structure that has various types of tBuC triple bond C-->Cu coordination modes. By using this single-crystal structure as a starting model for subsequent Rietveld refinement of X-ray powder diffraction data, the structure of the powder synthesized from CuI and tBuC triple bond CH was found to have the same structure as 1. Complex 2 has an extended sheet structure consisting of discrete zig-zag Cu4 subunits connected through bridging nPrC triple bond C groups. Complex 3 forms an infinite chain structure with extended Cu-Cu ladders (Cu-Cu=2.49(4)-2.83(2) A). The silver(I) congener 4 is iso-structural to 3 (average Ag-Ag distance 3.11 A), whereas the gold(I) analogue 5 forms a Au...Au honeycomb network with PhC triple bond C pillars (Au-Au=2.98(1)-3.26(1) A). Solid-state properties including photoluminescence, nu(C triple bond C) stretching frequencies and thermal stability of these polymeric systems are discussed in the context of the determined structures.     

Supramolecular fixation of NO2 with calix[4]arenes

Reaction of NO2 with simple calix[4]arenes in chloroform in the presence of a Lewis acid rapidly results in intense coloration caused by the encapsulation of nitrosonium cation.     

Asymmetric synthesis and applications of beta-amino Weinreb amides: asymmetric synthesis of (S)-coniine

Conjugate addition of lithium (S)-N-benzyl-N-alpha-methylbenzylamide to a range of alpha, beta-unsaturated Weinreb amides proceeds with high levels of diastereoselectivity (>95% de). The beta-amino Weinreb amide products may be transformed into beta-amino ketones via reactions with Grignard reagents, while treatment with DIBAL-H furnishes beta-amino aldehydes. Trapping of the aldehyde via Wadsworth-Emmons reaction and subsequent manipulation offers an efficient route to homochiral delta-amino acid derivatives and 2-substituted piperidines. The application of this methodology for the synthesis of (S)-coniine is demonstrated.     

Efficacy testing of disinfectants

The U.S. Environmental Protection Agency's (EPA) Office of Pesticide Programs (OPP) has the responsibility for regulating antimicrobial products, including sporicides, used to treat and decontaminate inanimate surfaces. In response to the anthrax (Bacillus anthracis) attacks of 2001 and the associated need for verifying the performance of chemicals for building decontamination, the EPA initiated research in late 2003 to evaluate and improve efficacy test methods for sporicides. The OPP Microbiology Laboratory located at the Environmental Science Center, Ft. Meade, MD is the lead laboratory. Through funding provided by EPA's Office of Research and Development (Safe Buildings Program), a collaborative research plan has been established to address several key issues. Research is currently being conducted on 2 fronts: (1) the evaluation of quantitative methodology for assessing the efficacy of sporicides, and (2) the development and comparative testing of selected modifications to improve the AOAC Sporicidal Activity Test (AOAC Method 966.04). Future studies will include the evaluation of candidate surrogates of B. anthracis using a quantitative method, and a multilaboratory validation study of a quantitative method-surrogate combination. The General Referee is serving as the Principal Investigator for all research described in this report, and has the overall responsibility for the technical conduct of the projects. In cases where the General Referee has oversight of projects that involve official collaborative studies and validation support from AOAC INTERNATIONAL, AOAC officials and the Committee Chair will determine the appropriate mechanism for formal study review. The 2003 General Referee report provides the background on the development and direction of the research projects. The preliminary data, general conclusions, next steps, and recommendations are provided in this report.     

Field and flow programming in frit-inlet asymmetrical flow field-flow fractionation

The separation of wide molecular mass (Mr) ranges of macromolecules using frit inlet asymmetrical flow field-flow fractionation (FI-AFlFFF) has been improved by implementing a combination of field and flow programming. In this first implementation, field strength (governed by the cross flow-rate through the membrane-covered accumulation wall) is decreased with time to obtain faster elution and improved detection of the more strongly retained (high Mr) materials. The channel outlet flow-rate is optionally held constant, increased, or decreased with time. With circulation of the flow exiting the accumulation wall to the inlet frit, the dual programming of cross flow and channel outlet flow could be implemented using just two pumps. With this flow configuration, the channel outlet flow-rate is always equal to the channel inlet flow-rate, and these may be programmed independently of the cross flow-rate through the membrane. FI-AFlFFF retains its operational advantage over conventional asymmetrical flow FFF (AFlFFF). Unlike conventional AFlFFF, FI-AFlFFF does not require time consuming, and experimentally inconvenient, sample focusing and relaxation steps involving valve switching and interruption of sample migration. The advantages of employing dual programming with FI-AFlFFF are demonstrated for sets of polystyrene sulfonate standards in the molecular mass range of 4 to 1000 kDa. It is shown that programmed FI-AFlFFF successfully expands the dynamic separation range of molecular mass.     

Copper(II) coordination to ligands immobilized on photoluminescent porous silicon

Increased preorganization can be achieved by immobilizing ligands on solid supports. Photoluminescent porous silicon, which can undergo facile hydrosilylation, was used as a support for open chain neutral N- and O-donor ligands. The abilities of these ligands to bind the divalent metal ions Ni(2+), Cu(2+), Zn(2+), and Pb(2+) are examined. Immobilized ligands selectively complexed Cu(II) over the other metal ions studied. Ligands immobilized on photoluminescent porous silicon also removed a significant amount, up to 98%, of Cu(II) from copper(II)-spiked, organic-rich, seawater samples.     

Mild cleavage of methoxymethyl (MOM) ethers with trimethylsilyl bromide

Trimethylsilyl bromide is an effective reagent for the deprotection of methoxymethyl ethers under mild conditions.