Thermal isomerizations of 1-(13)c-2,2,3,3-d(4)-cyclopropane to isotopically labeled trimethylene diradicals, 1-propylidenes, and propenes

The gas-phase thermal isomerizations of 1-13C-2,2,3,3-d4-cyclopropane lead to isotopically labeled propenes characteristic of both the traditional reaction mechanism involving a trimethylene diradical intermediate and a previously predicted, but never observed, path involving rate-limiting conversion of the cyclopropane to singlet 1-propylidenes, followed by a [1,2]-deuterium shift. The isomerizations give mixtures of both 1-13C-2,3,3,3-d4-propene and 1-13C-1,2,3,3-d4-propene, products characteristic of the two mechanisms that are clearly observable by 13C{1H} NMR spectroscopy.     

Synthesis and Antiproliferative Evaluation of 2-Deoxy-N-glycosylbenzotriazoles/imidazoles

A series of 2-deoxy-2-iodo-α-d-mannopyranosylbenzotriazoles was synthesized using the benzyl, 4,6-benzylidene and acetyl protected D-glucal in the presence of N-iodosuccinimide (NIS). Subsequent removal of the iodine at the C-2 position using tributyltin hydride under free radical conditions afforded the 2-deoxy-α-d-glucopyranosylbenzotriazoles in moderate to high yields. This method was extended to the preparation of substituted 2-deoxy-β-d-glucopyranosylimidazoles as well. The stereoselectivity of the addition reaction and the effect of the protecting group and temperature on anomer distribution of the benzotriazole series were also investigated. The anticancer properties of the newly synthesized compounds were evaluated in a series of viability studies using HeLa (human cervical adenocarcinoma), human breast and lung cancer cell lines. The N-[3,4,6-tri-O-benzyl-2-deoxy-α-d-glucopyranosyl]-1H-benzotriazole and the N-[3,4,6-tri-O-acetyl-2-deoxy-α-d-glucopyranosyl]-2H-benzotriazole were found to be the most potent cancer cell inhibitors at 20 µM concentrations across all four cell lines.     

Oxidation does not (always) kill reactivity of transition metals: solution-phase conversion of nanoscale transition metal oxides to phosphides and sulfides

Unexpected reactivity on the part of oxide nanoparticles that enables their transformation into phosphides or sulfides by solution-phase reaction with trioctylphosphine (TOP) or sulfur, respectively, at temperatures of ≤370 °C is reported. Impressively, single-phase phosphide products are produced, in some cases with controlled anisotropy and narrow polydispersity. The generality of the approach is demonstrated for Ni, Fe, and Co, and while manganese oxides are not sufficiently reactive toward TOP to form phosphides, they do yield MnS upon reaction with sulfur. The reactivity can be attributed to the small size of the precursor particles, since attempts to convert bulk oxides or even particles with sizes approaching 50 nm were unsuccessful. Overall, the use of oxide nanoparticles, which are easily accessed via reaction of inexpensive salts with air, in lieu of organometallic reagents (e.g., metal carbonyls), which may or may not be transformed into metal nanoparticles, greatly simplifies the production of nanoscale phosphides and sulfides. The precursor nanoparticles can easily be produced in large quantities and stored in the solid state without concern that "oxidation" will limit their reactivity.     

Porous CdTe nanocrystal assemblies: ligation effects on the gelation process and the properties of resultant aerogels

Highly porous CdTe nanoarchitectures (aerogels) were prepared by sol-gel assembly of discrete nanocrystals followed by supercritical CO(2) drying. CdTe nanocrystal surface functionalization (either phosphine oxide or thiolate) is found to be immaterial to oxidation induced gel formation suggesting that the standard thiolate capping procedure is not a necessary step in the gelation process. On the basis of this observation, and reduction induced dispersion of the gel network, the exposure of reactive sites and the subsequent surface oxidation reaction to form polychalcogenide linkages are key steps in the gelation mechanism. Consequently, CdTe aerogels exhibit similar physicochemical properties, regardless of original ligating functionality. The aerogels are mesoporous, with surface area >100 m(2)/g, and exhibit an optical bandgap of 1.92 eV, consistent with quantum confinement within the 3-D linked network. Photoluminescence is suppressed in the aerogels, but can be partially recovered upon heating.     

Chilling out: a cool aqueous environment promotes the formation of gas-surface complexes

SO(2), an important atmospheric pollutant, has been implicated in environmental phenomena such as acid rain, climate change, and cloud formation. In addition, SO(2) is fundamentally interesting because it forms spectroscopically identifiable complexes with water at aqueous surfaces. Vibrational sum frequency spectroscopy (VSFS) is used here to further investigate the mechanism by which SO(2) adsorbs to water at tropospherically relevant temperatures (0-23 °C). The spectral results lead to two important conclusions. SO(2) surface affinity is enhanced at colder temperatures, with nearly all of the topmost water molecules showing evidence of binding to SO(2) at 0 °C as compared to a much lower fraction at room temperature. This surface adsorption results in significant changes in water orientation at the surface, but is reversible at the temperatures examined here. Second, the SO(2) complex formation at aqueous surfaces is independent of aqueous solution acidity. One challenge in previous uptake studies was the ability to distinguish between the effects of surface adsorption as compared to bulk accommodation. The surface and vibrational specificity of these studies make this distinction possible, allowing a selective study of how the aqueous properties temperature and pH influence SO(2) surface affinity.     

Measuring gas-liquid partition coefficients of aroma compounds by solid phase microextraction, sampling either headspace or liquid

Hydrophobic compounds are important odorants and nutrients in foods and beverages, as well as environmental contaminants and pharmaceuticals. Factors influencing their partitioning within multi-component systems and/or from the bulk liquid phase to the air are critical for understanding aroma quality and nutrient bioavailability. The equilibrium partitioning of hydrophobic analytes between air and water was analyzed using solid phase microextraction (SPME) in the headspace (HS-SPME) and via direct immersion in the liquid (DI-SPME). The compounds studied serve as models for hydrophobic aroma compounds covering a range of air-water partition coefficients that extends over four orders of magnitude. By varying the total amount of analyte as well as the ratio of vapor to liquid in the closed, static system, the partition coefficient, K(vl), can be determined without the need for an external calibration, eliminating many potential systematic errors. K(vl) determination using DI-SPME in this manner has not been demonstrated before. There was good agreement between results determined by DI-SPME and by HS-SPME over the wide range of partitioning behavior studied. This shows that these two methods are capable of providing accurate, complementary measurements. Precision in K(vl) determination depends strongly on K(vl) magnitude and the ratio of the air and liquid phases.     

High-performance liquid chromatographic analysis of lacosamide in canine serum using ultraviolet detection: application to pre-clinical pharmacokinetics in dogs

A method for analysis of lacosamide [(R)‐2‐acetamido‐N‐benzyl‐3‐methoxypropionamide] is needed for both human and veterinary pharmacokinetic investigations. While lacosamide is currently used to manage partial‐onset seizures in humans suffering from epilepsy, it is also presently being investigated for use in the treatment of canine epilepsy in veterinary medicine. Currently, no dosing regimen for the drug exists in dogs. A novel and simple high‐performance liquid chromatography method was developed for determination of lacosamide in dog serum. Serum proteins (0.1 mL) were precipitated with ?20.0°C acetonitrile after addition of the internal standard, daidzein. Separation was achieved with a Phenomenex® Luna® C₁₈ (2) (5 µm, 250 × 4.60 mm) column with ultraviolet detection at 210 nm. The calibration curves were linear ranging from 0.5 to 25 µg/mL. Precision of the assay was <13% (RSD) and was within 12% for all points in the calibration curve. The limit of quantitation for this method was 0.5 µg/mL. The assay was applied successfully to a pre‐clinical study of lacosamide pharmacokinetics in dogs. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis,Computational Modeling,and Properties of Benzo‐Appended BODIPYs

A series of new functionalized mono‐ and dibenzo‐appended BODIPY dyes were synthesized from a common tetrahydroisoindole precursor following two different synthetic routes. Route A involved the assembly of the BODIPY core prior to aromatization, while in Route B the aromatization step was performed first. In general, Route A gave higher yields of the target dibenzo‐BODIPYs, due to the ease of aromatization of the BODIPYs compared with the corresponding dipyrromethenes, probably due to their higher stability under the oxidative conditions (2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone in refluxing toluene). However, due to the slow oxidation of highly electron‐deficient BODIPY 3 c bearing a meso‐C₆F₅ group, dibenzo‐BODIPY 4 c was obtained, in 35 % overall from dipyrromethane, only by Route B. Computational calculations performed at the 6‐31G(d,p) level are in agreement with the experimental results, showing similar relative energies for all reaction intermediates in both routes. In addition, BODIPY 3 c had the highest molecular electrostatic potential (MEPN), confirming its high electron deficiency and consequent resistance toward oxidation. X‐ray analyses of eight BODIPYs and several intermediates show that benzannulation further enhances the planarity of these systems. The π‐extended BODIPYs show strong red‐shifted absorptions and emissions, about 50–60 nm per benzoannulated ring, at 589–658 and 596–680 nm, respectively. In particular, db‐BODIPY 4 c bearing a meso‐C₆F₅ group showed the longest λ_max of absorption and emission, along with the lowest fluorescence quantum yield (0.31 in CH₂Cl₂); on the other hand monobenzo‐BODIPY 8 showed the highest quantum yield (0.99) of this series. Cellular investigations using human carcinoma HEp2 cells revealed high plasma membrane permeability for all dibenzo‐BODIPYs, low dark‐ and photo‐cytotoxicities and intracellular localization in the cell endoplasmic reticulum, in addition to other organelles. Our studies indicate that benzo‐appended BODIPYs, in particular the highly stable meso‐substituted BODIPYs, are promising fluorophores for bioimaging applications.     

Free Energy Calculations Give Insight into the Stereoselective Hydroxylation of α-Ionones by Engineered Cytochrome P450 BM3 Mutants

Previously, stereoselective hydroxylation of α-ionone by Cytochrome P450 BM3 mutants M01 A82W and M11 L437N was observed. While both mutants hydroxylate α-ionone in a regioselective manner at the C3 position, M01 A82W catalyzes formation of trans-3-OH-α-ionone products whereas M11 L437N exhibits opposite stereoselectivity, producing trans-(3S,6S)-OH-α-ionone and cis-(3S,6R)-OH-α-ionone. Here, we explore the stereoselective C3 hydroxylation of α-ionone by Cytochrome P450 BM3 mutants M01 A82W and M11 L437N using molecular dynamics-based free energy calculations to study the interaction between the enzyme and both the substrates and the products. The one-step perturbation approach is applied using an optimized reference state for substrates and products. While the free energy differences between the substrates free in solution amount to ～0 kJ mol(-1), the differences in mutant M01 A82W agree with the experimentally obtained dissociation constants K(d). Moreover, a correlation with experimentally observed trends in product formation is found in both mutants. The trans isomers show the most favorable relative binding free energy in the range of all four possible hydroxylated diastereomers for mutant M01 A82W, while the trans product from (6S)-α-ionone and the cis product from (6R)-α-ionone show highest affinity for mutant M11 L437N. Marcus theory is subsequently used to relate the thermodynamic stability to transition state energies and rates of formation.