Quantitative analysis of small pharmaceutical drugs using a high repetition rate laser matrix-assisted laser/desorption ionization source

In this work, a high repetition rate laser matrix-assisted laser desorption/ionization (MALDI) source is studied on a quadrupole-time-of-flight (QqTOF) and a triple quadrupole (QqQ) mass spectrometer for rapid quantification of small pharmaceutical drugs. The high repetition rate laser allows an up to 100-fold higher pulse frequency as compared with regular MALDI lasers, resulting in much larger sample throughput and number of accumulated spectra. This increases the reproducibility of signal intensities considerably, with average values being around 5% relative standard deviation after taking into account the area ratio of the analyte to an internal standard. Experiments were conducted in MS/MS mode to circumvent the large chemical background due to MALDI matrix ions in the low mass range. The dynamic range of calibration curves on the QqTOF mass spectrometer extended over at least two orders of magnitude, whereas on the QqQ it extended over at least three orders of magnitude. Detection limits ranged from 60-400 pg/microL on the QqTOF and from 6-70 pg/microL on the QqQ for a series of benzodiazepines. The benzodiazepine content of commercial pill formulations was quantified, and less than 5% error was obtained between the present method and the manufacturer's certified values. Furthermore, a high sample throughput was achieved with this method, so that a single MALDI spot could be quantitatively scanned in as little as 15 s, and an entire 96-well MALDI plate in 24 min.     

Synthese und Kristallstruktur von [(Me3Si)2BiCu(PMe3)3], dem ersten Komplex mit einer Bismut—Kupfer‐Bindung

Synthesis and Crystal Structure of [(Me₃Si)₂BiCu(PMe₃)₃] — the First Complex with a Bismuth—Copper Bond The reaction of CuO^t Bu with PMe₃ and Bi(SiMe₃)₃ in hexane yields the phosphine‐stabilized complex [(Me₃Si)₂Bi‐Cu( PMe₃)₃]. This synthesis gave rise to the first binuclear Bi—Cu compound to be structurally characterized by X‐ray crystallography.     

Preparation and characterization of well-defined sterically stabilized latex particles with narrow size distribution

 The synthesis and comprehensive characterization of a purely sterically stabilized latex with narrow size distribution is reported. By use of non-ionic initiators no chemically bound surface charges are generated. Stabilization of the particles is achieved through use of a non-ionic surfactant having a double bond in the hydrophobic part which is chemically bound to the surface. Analysis of the latex particles thus generated by transmission electron microscopy, disc centrifugation, and small-angle X-ray scattering (SAXS) reveals that the size distribution is narrow (standard deviation between 6 and 10%). SAXS furthermore demonstrates that the surfactant is located in a thin layer on the surface. The interaction of the particles is purely repulsive as shown by the analysis of the turbidity of the latex. The systems obtained herein may serve as model systems of water-borne purely sterically stabilized colloid particles. Received: 23 December 1997 Accepted: 18 May 1998     

Effects of the bead-bead potential on the restricted rotational diffusion of nonrigid macromolecules

The influence of the bead-bead interaction on the rotational dynamics of macromolecules which are immersed into a solution has been investigated by starting from the microscopic theory of the macromolecular motion, i.e., from a Fokker-Planck equation for the phase-space distribution function. From this equation, we then derived an explicit expression for the configuration-space distribution function of a nonrigid molecule which is immobilized on a surface. This function contains all the information about the interaction among the beads as well as the effects from the surrounding solvent particles and from the surface. For the restricted rotational motion, the dynamics of the macromolecules can now be characterized in terms of a rotational diffusion coefficient as well as a radial distribution functions. Detailed computations for the rotational diffusion coefficient and the distribution functions have been carried out for HOOKEAN, finitely extensible nonlinear elastic, and a DNA type bead-bead interaction.     

Regio- and Enantioselective Substitution of Acyclic Allylic Sulfoximines with Butylcopper in the Presence of Lithium Iodide and Boron Trifluoride

Enantiomerically pure N-methyl-, N-benzyl-, and N-(methoxyethyl)-S-(phenyl)cinnamylsulfoximines as well as the corresponding crotylsulfoximines have been prepared from N-methyl-, N-benzyl-, and N-(methoxyethyl)-S-(lithiomethyl)sulfoximines and carbonyl compounds by an addition-elimination-isomerization reaction sequence. Under basic conditions, complete isomerization of the vinylic sulfoximines, obtained as intermediates, to the corresponding allylic sulfoximines takes place. Chromatographically separable mixtures of (E) and (Z) allylic sulfoximines were isolated in the case of beta,gamma-disubstituted allylic sulfoximines. The (E/Z) ratio depends on the nature of the substituents in the beta- and gamma-positions, and the equilibrium amount of the (Z) isomer varies from 68% to nil. The allylic N-methylsulfoximines do not racemize thermally, and their rearrangement to the corresponding allylic sulfinamides is negligible. Upon prolonged treatment with boron trifluoride at low temperatures allylic N-methylsulfoximines are recovered unchanged. The crystal structure of S-(3,4-dihydronaphthalen-2-ylmethyl)-N-methyl-S-phenylsulfoximine was determined. Reaction of the allylic sulfoximines with butylcopper in the presence of lithium iodide and boron trifluoride leads with very high gamma-selectivities and moderate to high enantioselectivities to the corresponding chiral alkenes. Their configuration was determined by chemical correlation through ozonolysis to the corresponding carbonyl compounds. The asymmetric induction exerted by the chiral N-methyl-S-phenylsulfoximine group strongly depends on the double bond configuration and the substituents in the beta- and gamma-positions. The (E) allylic sulfoximines are substituted with low to moderate enantioselectivities (2-66%), whereas the (Z) allylic sulfoximines react with much higher enantioselectivities (69-92%). Interestingly, substitution of the beta-methyl-gamma-phenyl-substituted (Z) allylic sulfoximine and its beta-phenyl-gamma-methyl isomer proceeded with almost the same degree of asymmetric induction but with the opposite sense. Replacement of the N-methyl group by a benzyl or a methoxyethyl group has no significant influence on the regio- and enantioselectivity of the substitution.     

Studies on azaspiracid biotoxins. I. Ultrafast high-resolution liquid chromatography/mass spectrometry separations using monolithic columns

In this study, the performance of monolithic columns was evaluated for ultrafast liquid chromatography/mass spectrometry (LC/MS) analyses and for high-resolution separations of several azaspiracid biotoxin analogs. Because of their high permeability, monolithic columns offer a number of advantages over conventional packed columns; viz., very low backpressures and relatively flat van Deemter curves at high flow rates. That is, very high flow rates can be used for ultrafast analyses or, by using longer than normal columns, high-resolution separations are possible. In a series of experiments, we varied the mobile phase flow rates between 1 and 8 mL/min, and studied their impact on chromatographic parameters such as retention time, resolution, number of plates and pressure. The chromatographic run times could be reduced to ca. 30 s without a significant change in the separation efficiency. A signal intensity comparison revealed interesting differences between atmospheric-pressure chemical ionization (APCI) and electrospray ionization (ESI) in their flow-rate dependency. An explanation with respect to the behavior as of a mass-flow or a concentration-dependent device is given in the paper. Additionally, the column length was varied between 10 and 70 cm. As a result, the number of theoretical plates increased substantially. In the example shown in the report, an increase from 13 000 plates for a 10-cm column to 80 000 for a 70-cm column is demonstrated. In addition, the potential of the monolithic columns for high-resolution LC/MS separations is shown for a complex biotoxin mixture, which was separated on a 40-cm-long column.     

Bimetallic complexes from amphoteric group 13/15 ligands: syntheses and X-ray crystal structures

Bimetallic, pentel-bridged complexes of the type [(dmap)Me2M-E(SiMe3)2-M'(CO)n] (M=Al, Ga; E=P, As, Sb; M'=Cr, Fe, Ni; DMAP=4-(dimethylamino)pyridine) are formed by reactions of DMAP-coordinated monomeric Group 13/15 compounds [(dmap)Me2M-E(SiMe3)2] with the transition metal complexes [(Me3N)Cr(CO)5], [Fe3(CO)12], and [Ni(CO)4]. For the first time, this reaction offers a general pathway to compounds containing a Group 13 metal and a transition metal bridged by a pentel atom. Complexes prepared in this way were characterized by IR and multinuclear NMR spectroscopy and by single-crystal X-ray structure analysis. Their electronic and structural properties are discussed in detail. The Group 13/15 ligands are very weak acceptors, which is likely to be due to the electropositive Group 13 metal, and the complexes feature comparatively long pentel-transition metal bonds. In addition, the synthesis and structural characterization of the parent DMAP-coordinated gallanes [(dmap)Me2Ga-E(SiMe3)2] (E=P, As) are reported.     

A unified set of proposals for control and design of high speed data networks

In this paper we articulate our philosophy and approach to the design and control of high speed data networks. The object is to put into perspective and to explain the coordination of various isolated pieces of detailed technical analyses that have been reported in several recent papers. In the process we summarize what we have learnt in our recent work and, also, we give indications of the direction of our future work. Our scheme integrates feedback and open loop control. The feedback control is exercised by sliding windows; access controllers regulate bursty sources. All our design proposals are rooted in asymptotic analyses; the justification for asymptotics comes from the largeness of the parameters, such as propagation delay, speed, window size, buffer size, and the number of virtual circuits. This analysis makes a strong case for operating in a specific moderate usage regime, and adaptive dynamic windowing algorithms are given that make this happen; moreover, when in this regime, buffers may be sized aggressively small without jeopardizing performance and the simplicity of the retransmission protocol. The topics in the paper are: model of communication, results on the steady-state behavior of the basic model, access control, small buffers and retransmission protocols, dynamic adaptive windows, bursty sources, and contrast with previous work.I. Mitrani's work was done while AT&T Bell Laboratories.     

Sound propagation in metallic glasses—a new look at the tunneling model

A variety of amorphous metals exhibit a characteristic behavior in their acoustic properties at low frequencies which differs from the predictions of the standard tunneling model. We point out that a lower cut-off _min for the tunnel matrix element, which is needed for consistency of the tunneling model, leads to an upper bound on relaxation times induced by the conduction electrons. We derive explicit expressions for the velocity shift and internal friction for the normalconducting and superconducting case. It is shown that a maximum relaxation time plays an essential role at audio frequencies. The corresponding change of the acoustic properties is in qualitative agreement with vibrating reed experiments.