Investigation of the Crystallisation Behaviour of Lead Titanate (PT), Lead Zirconate (PZ) and Lead Zirconate Titanate (PZT) by EXAFS-Spectroscopy and X-Ray Diffraction

Two solid solutions of lead zirconium titanates PbZr _x Ti_{1 – x} O₃ (x = 0.1 and 0.35) as well as the reference compounds lead titanate and lead zirconate were prepared from zirconium and titanium n-propoxide, dissolved in 2-methoxyethanol, by sol-gel process. The amorphous products after pyrolysis of the dried gels and the crystalline phases were studied by EXAFS spectroscopy to monitor the structural changes from the amorphous oxide mixture to the crystalline ceramics after calcination. Additionally, the crystalline phases were identified by X-ray diffraction (XRD).It follows from the analysis of the EXAFS data that the local order of the amorphous phases seems to be completely different from that of the crystalline phase. There is no indication of a preformation of the local order of the perovskite structure. The analysis of our EXAFS spectra can be interpreted very consistently with the assumption that in the amorphous samples a segregation exists on molecular level and the low crystallisation temperatures are a consequence of very short diffusion paths.     

Determination of carbonyl compounds in exhaust gas by using a modified DNPH-method

The determination of carbonyl compounds in gaseous samples is usually accomplished by enrichment methods, in which 2,4-dinitrophenyl-hydrazine (DNPH) as a derivatization reagent has become established to a large extent. However, the conventional methods of DNPH-impingers and of DNPH-cartridges are applicable to emission measurements in a limited way only, depending on the NO₂-concentration in the exhaust gas. It could be proved that DNPH-derivatives, as well as DNPH, are also decomposed by NO₂ at a different speed, in which the hydrazones of unsaturated carbonyl compounds are probably more sensitive than those of the saturated carbonyl compounds. In view of this fact, the collecting methods had to be modified to avoid losses with the enrichment. The analysis of the compounds is carried out by HPLC with an effective gradient-system which is able to separate and detect the carbonyl compounds in exhaust gas within 16 min. Furthermore, a simple working-up procedure is presented which facilitates a parallel analysis by GC.     

Nickel-Catalyzed Preparations of Functionalized Organozincs

The reaction of primary alkyl bromides or chlorides with diethylzinc in the presence of Ni(acac)(2) (5 mol %) furnishes the corresponding alkylzinc halides (X = Br, Cl) via a halogen-zinc exchange reaction. The treatment of terminal alkenes with diethylzinc (neat, 25-60 degrees C) in the presence of Ni(acac)(2) as a catalyst (1-5 mol %) and 1,5-cyclooctadiene (COD) affords the corresponding dialkylzincs via a hydrozincation reaction. Whereas the conversion for simple alkenes bearing a remote functionality reaches 40 to 63%, the hydrozincation of allylic, homoallylic alcohols and allylic amines proceeds very efficiently (85-95% conversion). All the zinc organometallics obtained react with various electrophiles (allylic halides, enones, acid chlorides, alkynyl halides, ethyl propiolate) after transmetalation with CuCN.2LiCl. In the presence of the chiral catalyst 12, the dialkylzincs prepared add to aldehydes with high enantioselectivity.     

Synthesis and auration of primary and di-primary heteroaryl-phosphines

Convenient high-yield syntheses of the primary and di-primary heteroaryl-phosphines R-PH2 and H2P-R'-PH2(with R = 2-thienyl, 2-furyl, and R'= 2,5-thiophenediyl, 2,5-furandiyl, respectively) are presented. The products and a set of precursor molecules have been characterized by analytical and spectral data, and the crystal structures of selected molecules have been determined: 2-C4H3O-PCl2, 2,5-(Cl2P)2C4H2O, 2,5-[(Et2N)2P]2C4H2E (with E = O, S). In the crystals, the two molecules with -PCl2 substituents adopt trans conformations, while the other two have the -P(NEt2)2 groups rotated into a twist conformation. The reaction of the thienyl compounds with tris[(tert-phosphine)gold]oxonium tetrafluoroborates gave almost quantitative yields of the tri- and hexanuclear gold complexes, respectively: {2-C4H3S-P[Au(PR3)]3}+BF4- and [2,5-{[(R3P)Au]3P}2C4H2S]2+(BF4(-)2, (R =tBu, Ph). The structures of the compounds with R3P =tBu3P ligands have been determined. In both cases the [2-C4H3/2S-P] units cap triangles of gold atoms in an array that can be described as three [Au(PR3)]+ cations bridged by a phosphido dianion (RP)2-.     

Liquid Metal Superelastic Fiber Mat Enabling Highly Permeable Wearable Electronics Toward Comfortable e-Skins

Low water vapor and air permeability is a persistent challenge in wearable and on-skin electronics, as it reduces wearing comfort, and leads to skin irritation and inflammation in the long term. To tackle this issue, Zheng and coworkers designed a stretchable conductor based on an elastomeric fiber mat coated by liquid metal. After simple activation via stretching, the flexible conductor was endowed with excellent permeability, good stretchability, exceptional electrical stability, and good biocompatibility, ascribed to the mesh-like structure and the vertically buckled structure of the liquid metal. Based on the intriguing properties of the material, it was employed in a multi-functional wearable device, able to detect the heartbeat and sweat while serving as a heating device. The corresponding research has been published in Nature Materials and can be accessed at https://doi.org/10.1038/s41563-020-00902-3.     

Screening an In-House Isoquinoline Alkaloids Library for New Blockers of Voltage-Gated Na+ Channels Using Voltage Sensor Fluorescent Probes: Hits and Biases

Voltage-gated Na⁺ (Na_V) channels are significant therapeutic targets for the treatment of cardiac and neurological disorders, thus promoting the search for novel Na_V channel ligands. With the objective of discovering new blockers of Na_V channel ligands, we screened an In-House vegetal alkaloid library using fluorescence cell-based assays. We screened 62 isoquinoline alkaloids (IA) for their ability to decrease the FRET signal of voltage sensor probes (VSP), which were induced by the activation of Na_V channels with batrachotoxin (BTX) in GH3b6 cells. This led to the selection of five IA: liriodenine, oxostephanine, thalmiculine, protopine, and bebeerine, inhibiting the BTX-induced VSP signal with micromolar IC₅₀. These five alkaloids were then assayed using the Na⁺ fluorescent probe ANG-2 and the patch-clamp technique. Only oxostephanine and liriodenine were able to inhibit the BTX-induced ANG-2 signal in HEK293-hNa_V1.3 cells. Indeed, liriodenine and oxostephanine decreased the effects of BTX on Na⁺ currents elicited by the hNa_V1.3 channel, suggesting that conformation change induced by BTX binding could induce a bias in fluorescent assays. However, among the five IA selected in the VSP assay, only bebeerine exhibited strong inhibitory effects against Na⁺ currents elicited by the hNav1.2 and hNav1.6 channels, with IC₅₀ values below 10 µM. So far, bebeerine is the first BBIQ to have been reported to block Na_V channels, with promising therapeutical applications.     

The specific heat capacities of V2O5/P2O5-based glasses

The specific heat capacities of a series of V₂O₅/P₂O₅-based glasses have been measured in the approximate temperature range 3–300 K. The proportions of the host constituents were varied and the effects produced by adding oxides of copper, titanium and sodium were examined. The measurements were extended to investigate the influence of fast neutron irradiation upon the specific heat capacity of pure, initially crystalline V₂O₅.The observations are consistent with a spectrum of background vibrations, the form of which is temperature dependent. At intermediate temperatures the vibrations were consistent with the glasses displaying predominantly chain-like characteristics. With reduction to lower temperatures the vibrational behaviour increasingly resembled that of solids displaying three-dimensional characteristics. The temperature dependence of the specific heat capacity at the lowest temperatures was consistent with the presence of a narrow band of low-frequency modes centred upon 1.67 × 10¹¹ s^?1, the density of which increased with phosphorus content. From observations of the density of these modes in the doped specimens, it was concluded that the role of copper wass largely that of a network former, whereas titanium and sodium were essentially network modifiers.     

Separation of Dihydro-Isocoumarins and Dihydro-Stilbenoids from Hydrangea macrophylla ssp. serrata by Use of Counter-Current Chromatography

Previously, different Hydrangea macrophylla ssp. serrata cultivars were investigated by untargeted LC-MS analysis. From this, a list of tentatively identified and unknown compounds that differ significantly between these cultivars was obtained. Due to the lack of reference compounds, especially for dihydro-isocoumarins, we aimed to isolate and structurally characterise these compounds from the cultivar ‘Yae-no-amacha’ using NMR and LC-MS methods. For purification and isolation, counter-current chromatography was used in combination with reversed-phase preparative HPLC as an orthogonal and enhanced purification workflow. Thirteen dihydro-isocoumarins in combination with other metabolites could be isolated and structurally identified. Particularly interesting was the clarification of dihydrostilbenoid glycosides, which were described for the first time in H. macrophylla ssp. serrata. These results will help us in further studies on the biological interpretation of our data.     

Laser–Induced Fluorescence Detection of Carbamates Traces in Water

The absorption and fluorescence spectra of carbaryl (CB), carbofuran (CF) and carbendazim (MBC) have been studied. Fluorescence lifetime and fluorescence quantum yields are also reported as well as the influence of pH, solvent and presence of humic acids on fluorescence. The limit of detection (LD) of the three compounds has been measured by direct analysis by laser-induced fluorescence (LIF) using a pulsed YAG laser with an Optical Parametric Oscillator (OPO) as excitation source and an Intensified Charged Coupled Device (ICCD) camera for the fluorescence detection. Instrumental LD found for CB, for MBC and for CF are respectively 4, 50 and 1000 ng L⁻¹. In tap water, the LD obtained is 800 ng L⁻¹ for MBC and 20,000 ng L⁻¹ for CF. For CB, the use of a time shift between excitation and emission allows to reach a LD of 20 ng L⁻¹ in tap water.