Topographical properties of polymer films deposited in capillaries for electrophoretic separations of large organic molecules

Topography and thickness of hydrophilic polymer coatings of fused-silica capillaries for capillary electrophoresis (CE) were investigated using atomic force microscopy (AFM), scanning electron microscopy (SEM), and profilometry. Three hydrogels, poly(2-hydroxyethyl methacrylate) [poly(HEMA)], poly(diethylene glycol monomethacrylate) [poly(DEGMA)], and poly(triethylene glycol monomethacrylate) [poly(TEGMA)], were deposited using two procedures, either by simple physical sorption of the polymers, or by derivatization of the capillary wall surface with glycidyl methacrylate (EPMA) followed by polymerization of the appropriate monomers. The performance of the modified capillaries was tested under CE conditions (decrease in the electroosmotic flow, EOF dependence on pH, separation of milk and standard proteins). It has been found that the most important property of the polymer coating is its thickness, whereas its topography and the degree of its hydrophobicity are less significant. Film deposition by physical adsorption is preferable to polymerization on the derivatized surface.     

Thioacylation reactions for the surface functionalization of phosphorus-containing dendrimers

The functionalization of phosphorus-containing dendrimers was easily achieved through thioacylation reactions involving new dendrimers capped with dithioester end groups and various functionalized amines. These reactions were successfully applied to the first generation (12 end groups) and the third generation of the dendrimer (48 end groups) and allowed their functionalization by various primary or secondary amines, alcohols, glycols, and azides. [reaction: see text]     

Photoinduced electron transfer at liquid|liquid interfaces: dynamics of the heterogeneous photoreduction of quinones by self-assembled porphyrin ion pairs

The initial stages of the heterogeneous photoreduction of quinone species by self-assembled porphyrin ion pairs at the water|1,2-dichloroethane (DCE) interface have been studied by ultrafast time-resolved spectroscopy and dynamic photoelectrochemical measurements. Photoexcitation of the water-soluble ion pair formed by zinc meso-tetrakis(p-sulfonatophenyl)porphyrin (ZnTPPS(4)(-)) and zinc meso-tetrakis(N-methylpyridyl)porphyrin (ZnTMPyP(4+)) leads to a charge-separated state of the form ZnTPPS(3)(-)-ZnTMPyP(3+) within 40 ps. This charge-separated state is involved in the heterogeneous electron injection to acceptors in the organic phase in the microsecond time scale. The heterogeneous electron transfer manifests itself as photocurrent responses under potentiostatic conditions. In the case of electron acceptors such as 1,4-benzoquinone (BQ), 2,6-dichloro-1,4-benzoquinone (DCBQ), and tetrachloro-1,4-benzoquinone (TCBQ), the photocurrent responses exhibit a strong decay due to back electron transfer to the oxidized porphyrin ion pair. Interfacial protonation of the radical semiquinone also contributes to the photocurrent relaxation in the millisecond time scale. The photocurrent responses are modeled by a series of linear elementary steps, allowing estimations of the flux of heterogeneous electron injection to the acceptor species. The rate of electron transfer was studied as a function of the thermodynamic driving force, confirming that the activation energy is controlled by the solvent reorganization energy. This analysis also suggests that the effective redox potential of BQ at the liquid|liquid boundary is shifted by 0.6 V toward positive potentials with respect to the value in bulk DCE. The change of the redox potential of BQ is associated with the formation of hydrogen bonds at the liquid|liquid boundary. The relevance of this approach toward modeling the initial processes in natural photosynthetic reaction centers is briefly discussed.     

Vibronic intensities in centrosymmetric lanthanide complex ions. I

Summary A theoretical model to calculate the vibronic intensities induced by the odd vibrational modes in centrosymmetric lanthanide complexes is developed and applied to octahedral complex ions, LnX ₆ ^3– , such as occur in the hexachloroelpasolites Cs₂NaLnCl₆. Both the crystal field and the ligand polarisation contributions are evaluated using a standard set of symmetry coordinates. For the crystal field term a truncated expansion of the intermediates states is employed rather than the more conventional closure approximation. Special care is necessary to ensure that the phases of the contributions are correctly determined since the cross-term between the ligand polarisation and crystal field contributions is signed. General equations applicable to anyf ⁿ complex ion are derived and an example of their application to the PrCl ₆ ^3– ion is given The agreement with experiment is satisfactory.     

An alternative method for pucker determination in carbohydrates from residual dipolar couplings: a solution NMR study of the fructofuranosyl ring of sucrose

A simple solution NMR method is presented for pucker determination of five-membered rings using only residual dipolar couplings obtained in a single liquid crystalline medium, DMPC/DHPC bicelles (DMPC = dimyristoylphosphatidylcholine; DHPC = dihexanoylphosphatidylcholine). The method was applied to determine the pucker of the fructofuranosyl ring of sucrose. The results indicate a fructofuranosyl pucker phase in the 20 degrees - 70 degrees range. The pucker phases are in agreement with those from previous NMR and optical spectroscopic studies and, importantly, do not rely on empirically parametrized Karplus curves. Furthermore, the analysis implies more than one stable pucker phase and rapid ring interconversion in this range. The present results suggest that using residual dipolar couplings alone can reveal multiple conformations present in solution. Hence, when a sufficient number of residual dipolar coupling constants is measured, the outcome is a robust, reliable, and independent route for determining carbohydrate and nucleic acid structure by NMR spectroscopy.     

Isolation of a new member of the ecdysteroid glycoside family: 2-deoxy-20-hydroxyecdysone 22-O-beta-D-glucopyranoside

A new ecdysteroid glycoside, 2-deoxy-20-hydroxyecdysone 22-O-beta-D-glucopyranoside, is isolated from the herb Silene italica ssp. nemoralis (Waldst. and Kit.) Nyman. The compound is purified with multistep chromatography, such as classical column chromatography on alumina and droplet countercurrent distribution. Also, it is expanded using twice low-pressure reversed-phase liquid column chromatography. Chromatography in four steps results in the purified 2-deoxy-20-hydroxyecdysone 22-O-beta-D-glucopyranoside. Two other ecdysteroids have also been separated, including the formerly identified integristerone A and 24(28)-dehydromakisterone A.     

Crystal and molecular structure of [9-(2′-tosylaminophenyl)-6-methylthio-3-acetyl-5,7,8-triazanone-3,6,8-thien-2-one]

Institute for Applied Physics, Academy of Sciences of the Moldavian SSR. Institute of Chemistry, Academy of Sciences of the Moldavian SSR. Nat. Research Institute for Physics and Organic Chemistry, Rostov State University. Translated from Zhurnal Strukturnoi Khimii, Vol. 31, No. 2, pp. 199–202, 1990.     

Acid-catalysed decomposition of (20 R) and (20 S)-20-azido-5α-pregnane : bis steroids Schiff base formation via imine coupling.

BF₃-OEt₂ decompostion of azides $\text{1}$ or $\text{2}$ leads to the coupling product Schiff base $\text{6}$$\text{via}$ imine intermediates.     

Finite extensibility and orientational effects in rubbers. A physical interpretation of the ‘van der Waals equation’ for the elastic force

We propose a physical interpretation of the so-called van der Waals equation of state for rubbers, which gives a relation between the force and the deformation. On a phenomenological basis this equation takes the finite extensibility and a non-defined interaction into account. Here the fininte extensibility is discussed for the dilute case (no entanglements) and the highly entangled limit. The intramolecular interactions are described by orientational effects. The resulting equation of state for the force shows the same features as the van der Waals equation.Dedicated to Prof. H.-G. Kilian on the occasion of his 60th birthday.     

Calculation of molecular geometries by SCF perturbation theory

An SCF perturbation method for investigating the effects of an arbitrary change in nuclear configuration on the electronic structure of a molecule is reported. Illustrative calculations for CO₂ and CH₃OH are presented. It is found that, when taken to second order, the error in the calculated change in energy which results from a change in nuclear configuration is typically in the range of 0.1 to 7%.