Sorption kinetics: measurement of surface resistance

Adsorption - The problem of measuring sorption kinetics in microporous adsorbents and distinguishing experimentally between surface resistance and internal diffusion is discussed and reviewed with...     

Evaluating the freeze–thaw phenomenon in sandwich-structured composites via numerical simulations and infrared thermography

Journal of Thermal Analysis and Calorimetry - The water ingress phenomenon in sandwich-structured composites used in the aerospace/aeronautical sector is a current issue. This type of defect can...     

Simple Characterization of Green-Synthesized Silver Nanoparticles by Capillary Electrophoresis

The development of methodologies for the characterization of silver nanoparticles (AgNPs) synthesized using natural products has received increasing attention, especially to monitoring its stability and size for further application. In this paper, a capillary electrophoretic (CE) method is presented for characterization of AgNPs synthesized using honey or glucose as reducing agents. A simple electrolyte solution composed of 20 mM sodium borate and 20 mM sodium dodecylsulfate (SDS) at pH 8.5 was used for separation of AgNPs within a short analysis time (<12 min). The obtained results were compared with the traditional characterization techniques, such as transmission electron microscopy (TEM) and dynamic light scattering (DLS), showing satisfactory correlation in terms of size distribution. In addition, valuable information about electrophoretic mobility and zeta potential values of AgNPs was obtained by applying the CE-UV/Vis method. Thus, the proposed methodology represents a straightforward tool for the fast and cost-effective characterization of AgNPs within a single analysis, employing minimal amounts of reagents and samples.     

Enhanced Electrocatalytic Oxygen Evolution in Au–Fe Nanoalloys

Oxygen evolution reaction (OER) is the most critical step in water splitting, still limiting the development of efficient alkaline water electrolyzers. Here we investigate the OER activity of Au–Fe nanoalloys obtained by laser-ablation synthesis in solution. This method allows a high amount of iron (up to 11 at %) to be incorporated into the gold lattice, which is not possible in Au–Fe alloys synthesized by other routes, due to thermodynamic constraints. The Au_0.89Fe_0.11 nanoalloys exhibit strongly enhanced OER in comparison to the individual pure metal nanoparticles, lowering the onset of OER and increasing up to 20 times the current density in alkaline aqueous solutions. Such a remarkable electrocatalytic activity is associated to nanoalloying, as demonstrated by comparative examples with physical mixtures of gold and iron nanoparticles. These results open attractive scenarios to the use of kinetically stable nanoalloys for catalysis and energy conversion.     

Microplate-Based Evaluation of the Sugar Yield from Giant Reed,Giant Miscanthus and Switchgrass after Mild Chemical Pre-Treatments and Hydrolysis with Tailored <Emphasis Type="Italic">Trichoderma</Emphasis> Enzymatic Blends

Giant reed, miscanthus, and switchgrass are considered prominent lignocellulosic feedstocks to obtain fermentable sugars for biofuel production. The bioconversion into sugars requires a delignifying pre-treatment step followed by hydrolysis with cellulase and other accessory enzymes like xylanase, especially in the case of alkali pre-treatments, which retain the hemicellulose fraction. Blends richer in accessory enzymes than commercial mix can be obtained growing fungi on feedstock-based substrates, thus ten selected Trichoderma isolates, including the hypercellulolytic strain Trichoderma reesei Rut-C30, were grown on giant reed, miscanthus, or switchgrass-based substrates. The produced enzymes were used to saccharify the corresponding feedstocks, compared to a commercial enzymatic mix (6 FPU/g). Feedstocks were acid (H₂SO₄ 0.2–2%, w/v) or alkali (NaOH 0.02–0.2%, w/v) pre-treated. A microplate-based approach was chosen for most of the experimental steps due to the large number of samples. The highest bioconversion was generally obtained with Trichoderma harzianum Or4/99 enzymes (78, 89, and 94% final sugar yields at 48 h for giant reed, miscanthus, and switchgrass, respectively), with significant increases compared to the commercial mix, especially with alkaline pre-treatments. The differences in bioconversion yields were only partially caused by xylanases (maximum R ² = 0.5), indicating a role for other accessory enzymes.     

226Ra and uranium isotopic ratios characterization into the Gran Sasso aquifer,Italy

Journal of Radioanalytical and Nuclear Chemistry - Groundwater samples, collected into the deep underground facilities of Gran Sasso National Laboratory of the National Institute of Nuclear Physics...     

Exploring the Phase-Selective,Green, Hydrothermal Synthesis of Upconverting Doped Sodium Yttrium Fluoride: Effects of Temperature,Time, and Precursors

The aim of this work was i) to develop a hydrothermal, low-temperature synthesis protocol affording the upconverting hexagonal phase NaYF₄ with suitable dopants while adhering to the “green chemistry” standards and ii) to explore the effect that different parameters have on the products. In optimizing the synthesis protocol, short reaction times and low temperatures (below 150 °C) were considered. Yb³⁺ and Er³⁺ ions were chosen as dopants for the NaYF₄ material. Within the context of the second goal, parameters including nature of the precursors, treatment temperature, and treatment time were investigated to afford a pure hexagonal crystalline phase, both in the doped and undoped materials. To fully explore the synthesis results, the prepared materials were characterized from a structural (XRD), compositional (XPS, ICP-MS), and morphological (SEM) point of view. The upconverting properties of the compounds were confirmed by photoluminescence measurements.     

Synthesis, properties and structures of the two “electron rich” cobalt-sulphur clusters [Co6(μ3-S)8(PEt3)6]

The reaction of hydrogen sulphide with [Co(H₂O)₆](BF₄)₂ and triethylphosphine in the presence of sodium tetraphenylborate or tetrabutylammonium hexafluorophosphate gave the paramagnetic clusters [Co₆(μ₃-S)₈(PEt₃)₆](Y) (Y = BPh₄, (1), PF₆, (2)). These compounds can be easily reduced by sodium napthalenide to the diamagnetic species [Co₆(μ₃-S)₈(PEt₃)₆] · 2C₄H₈O (3). The molecular structures of 1 and 3 have been established by single-crystal X-ray diffraction methods. Crystal data: (1) space group P , a = 19.481(9), b = 15.562(7), c = 12.390(b) Å, α = 92.70(8), β = 94.50(7), γ = 94.10(9)°, Z = 2, (3) space group R , a = 11.780(6) Å, α = 92.50(7)°, Z = 1. Both structures were solved by the heavy atom method and refined by full-matrix least-squares techniques to the conventional R factors values of 0.050 for 1 and 0.044 for 3 on the basis of 4251 and 1918 observed reflections, respectively. The two clusters [Co₆(μ₃-S)₈)(PEt₃)₆]^1+,0 are isostructural, the inner core consisting of an octahedron of cobalt atoms with all the faces symmetrically capped by triply bridging sulphur atoms. Each metal centre is additionally linked to a triethylphosphine group so that each cobalt atom is co-ordinated by four sulphur atoms and one phosphorus in a distorted square pyramidal environment. The addition of one electron whilst leaving unchanged the geometry of the inner framework, induces small changes in the structural parameters, the average Co---Co and Co---P distances being 2.794 (3) and 2.162 (2) Å for 1 and 2.817 (3) and 2.138 (2) Å for 3 respectively. Electrochemistry in non-aqueous solvents shows the electron-transfer sequence

Full-size image (3K)

The tricationic species is stable only in the short time of cyclic voltammetric tests.