Simultaneous measurements of heat of hydration and chemical shrinkage on hardening cement pastes

Isothermal calorimetry and chemical shrinkage measurements are two independent techniques used to study the development of hydration in cementitious systems. In this study, calorimetry and chemical shrinkage measurements were combined and simultaneously performed on hydrating cement paste samples. Portland cement pastes with different water to cement ratios and a cement paste containing calcium sulfoaluminate clinker and anhydrite were studied. The combined calorimetry/chemical shrinkage test showed good reproducibility and revealed the different hydration behavior of sealed samples and open samples, i.e., samples exposed to external water during hydration. Large differences between sealed and open samples were observed in a Portland cement paste with low water to cement ratio and in the calcium sulfoaluminate paste; these effects are attributed to self-desiccation of the sealed pastes. Once the setup is fully automatized, it is expected that combined calorimetry/chemical shrinkage measurements can be routinely used for investigating cement hydration.     

Enhanced angular tolerance of resonant waveguide grating reflectors

We introduce an approach to enhance the angular tolerance of resonant waveguide gratings by stacking two resonant structures on top of each other. It is shown that reflectivities close to unity can be retrieved over the entire angular spectrum by a double T-shaped grating configuration. Although a combination of silicon as the high-index and diamond as the low-index material is considered, the principles of our new approach can also be used to realize monolithic silicon structures with similar properties. We illustrate that the functionality of the device can be understood by a decomposition into separated elements. Our approach might have compelling applications as new diffractive-reflective optical components with low-coating thermal noise in the field of high-precision metrology.     

Experimental and numerical investigation of paperboard creasing

Laminated paperboard is widely used in packaging products. It usually consists of multiple layers bonded to each other by starch or adhesion. The indentation of fold lines (creasing) plays a crucial role during the whole converting process. It is important to control delamination and other damage effects to arrive at commercial cartons with high quality. Thus, the aim of this study is to describe the material behavior of a laminated paperboard during the creasing process. The paperboard was considered as a laminate of three different layers, and each was modeled separately with an anisotropic elastic-plastic material model while a cohesive zone approach described the opening behavior in between. The initial yielding was given by the Hill's 48 yield criterion, while the isotropic strain hardening was described by a power law hardening function. To calibrate the material parameters, a sequence of tensile and compression tests was conducted for each layer in different directions to account for the material's anisotropy. Finally, the creasing process was investigated using a two-dimensional plane strain finite element model. (© 2014 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

{[CuSn5Sb3]2−}2: A Dimer of Inhomogeneous Superatoms

Reaction of the binary Zintl anion (Sn₂Sb₂)^2? with the β‐diketiminato complex [LCu(NCMe)] (L=nacnac=[(N(C₆H₃ⁱPr₂‐2,6)C(Me))₂CH]^?) in ethylenediamine or DMF affords the ternary cluster dimer {[CuSn₅Sb₃]^2?}₂ ( 1 ) as its [K(crypt‐222)]⁺ salt. The chemical formulation of 1 is supported by energy‐dispersive X‐ray spectroscopy (EDX) and quantum chemical calculations. Each monomeric part of the dimer represents a trimetallic “[CuSn₅Sb₃]^2?” cluster, with an architecture in between a tricapped trigonal prism and a capped square antiprism. As shown by quantum chemical investigations, the presence of Sb atoms and, in particular, of Cu atoms in the cluster skeleton makes the monomeric unit behave like an inhomogeneous superatom, which clearly prefers to dimerize, thereby producing a relatively short, yet virtually non‐bonding Cu???Cu distance.     

Hydrolytic Methods for the Quantification of Fructose Equivalents in Herbaceous Biomass

A low, but significant, fraction of the carbohydrate portion of herbaceous biomass may be composed of fructose/fructosyl-containing components (“fructose equivalents”); such carbohydrates include sucrose, fructooligosaccharides, and fructans. Standard methods used for the quantification of structural-carbohydrate-derived neutral monosaccharide equivalents in biomass are not particularly well suited for the quantification of fructose equivalents due to the inherent instability of fructose in conditions commonly used for hemicellulose/cellulose hydrolysis (>80% degradation of fructose standards treated at 4% sulfuric acid, 121°C, 1 h). Alternative time, temperature, and acid concentration combinations for fructan hydrolysis were considered using model fructans (inulin, β-2,1, and levan, β-2,6) and a grass seed straw (tall fescue, Festuca arundinacea) as representative feedstocks. The instability of fructose, relative to glucose and xylose, at higher acid/temperature combinations is demonstrated, all rates of fructose degradation being acid and temperature dependent. Fructans are shown to be completely hydrolyzed at acid concentrations well below that used for the structural carbohydrates, as low as 0.2%, at 121°C for 1 h. Lower temperatures are also shown to be effective, with corresponding adjustments in acid concentration and time. Thus, fructans can be effectively hydrolyzed under conditions where fructose degradation is maintained below 10%. Hydrolysis of the β-2,1 fructans at temperatures ≥50°C, at all conditions consistent with complete hydrolysis, appears to generate difructose dianhydrides. These same compounds were not detected upon hydrolysis of levan, sucrose, or straw components. It is suggested that fructan hydrolysis conditions be chosen such that hydrolysis goes to completion; fructose degradation is minimized, and difructose dianhydride production is accounted for.     

Organotin–Oxido Cluster‐Based Multiferrocenyl Complexes Obtained by Hydrolysis of Ferrocenyl‐Functionalized Organotin Chlorides

Three organotin–oxido clusters were formed by hydrolysis of ferrocenyl‐functionalized organotin chloride precursors in the presence of NaEPh (E=S, Se). [R^FcSnCl₃?HCl] ( C ; R^Fc = CMe₂CH₂C(Me)?N?N?C(Me)Fc) and [SnCl₆]^2? formed {(R^FcSnCl₂)₃[Sn(OH)₆]}[SnCl₃] ( 3 a ) and {(R^FcSnCl₂)₃[Sn(OH)₆]}[PhSeO₃] ( 3 b ), bearing an unprecedented [Sn₄O₆] unit, in a one‐pot synthesis or stepwise through [(R^FcSnCl₂)₂Se] ( 1 ) plus [(R^FcSnCl₂)SePh] ( 2 ). A one‐pot reaction starting out from FcSnCl₃ gave [(FcSn)₉(OH)₆O₈Cl₅] ( 4 ), which represents the largest Fc‐decorated Sn/O cluster reported to date.     

Pyrimidoquinazolinophenanthroline Opens Next Chapter in Design of Bridging Ligands for Artificial Photosynthesis**

The synthesis and detailed characterization of a new Ru polypyridine complex containing a heteroditopic bridging ligand with previously unexplored metal-metal distances is presented. Due to the twisted geometry of the novel ligand, the resultant division of the ligand in two distinct subunits leads to steady state as well as excited state properties of the corresponding mononuclear Ru(II) polypyridine complex resembling those of prototype [Ru(bpy)₃]²⁺ (bpy=2,2'-bipyridine). The localization of the initially optically excited and the nature of the long-lived excited states on the Ru-facing ligand spheres is evaluated by resonance Raman and fs-TA spectroscopy, respectively, and supported by DFT and TDDFT calculations. Coordination of a second metal (Zn or Rh) to the available bis-pyrimidyl-like coordination sphere strongly influences the frontier orbitals, apparent by, for example, luminescence quenching. Thus, the new bridging ligand motif offers electronic properties, which can be adjusted by the nature of the second metal center. Using the heterodinuclear Ru−Rh complex, visible light-driven reduction of NAD⁺ to NADH was achieved, highlighting the potential of this system for photocatalytic applications.     

Very Facile Polarity Umpolung and Noncovalent Functionalization of Inorganic Nanoparticles: A Tool Kit for Supramolecular Materials Chemistry

The facile assembly of shell‐by‐shell (SbS)‐coated nanoparticles [TiO₂?PAC₁₆]@shell 1 – 7 (PAC₁₆=hexadecylphosphonic acid), which are soluble in water and can be isolated as stable solids, is reported. In these functional architectures, an umpolung of dispersibility (organic apolar versus water) was accomplished by the noncovalent binding of ligands 1 – 7 to titania nanoparticles [TiO₂?PAC₁₆] containing a first covalent coating with PAC₁₆. Ligands 1 – 7 are amphiphilic and form the outer second shell of [TiO₂?PAC₁₆]@shell 1 – 7 . The tailor‐designed dendritic building blocks 3 – 5 contain negative and positive charges in the same molecule, and ligands 6 and 7 contain a perylenetetracarboxylic acid dimide (PDI) core ( 6 / 7 ) as a photoactive reporter component. In the redox and photoactive system [TiO₂?PAC₁₆]@shell 7 , electronic communication between the inorganic core to the PDI ligands was observed.     

Morphology of adsorbed polymers and solid surface wettability

The adsorption of a polyacrylamide (MW 14600) and two polysaccharides (MW 9260 and 706 x 10(3)) onto model silica surfaces of different hydrophobicities was investigated. In all cases, adsorption adhered to the Freundlich isotherm, reflecting the heterogeneous character of the solid substrates. The latter strongly influenced the character of the adsorbed polymer, with morphologies from chainlike structures to thin films and patches being observed. Surface roughness, polymer type, and molecular weight also play roles in controlling adsorbed polymer morphology. Surface wettability is strongly influenced by the thickness of the adsorbed layer.     

Time- and frequency-resolved coherent anti-Stokes Raman scattering spectroscopy with sub-25 fs laser pulses

In general, many different diagrams can contribute to the signal measured in broadband four-wave mixing experiments. Care must therefore be taken when designing an experiment to be sensitive to only the desired diagram by taking advantage of phase matching, pulse timing, sequence, and the wavelengths employed. We use sub-25 fs pulses to create and monitor vibrational wavepackets in gaseous iodine, bromine, and iodine bromide through time- and frequency-resolved femtosecond coherent anti-Stokes Raman scattering (CARS) spectroscopy. We experimentally illustrate this using iodine, where the broad bandwidths of our pulses, and Boltzmann population in the lower three vibrational levels conspire to make a single diagram dominant in one spectral region of the signal spectrum. In another spectral region, however, the signal is the sum of two almost equally contributing diagrams, making it difficult to directly extract information about the molecular dynamics. We derive simple analytical expressions for the time- and frequency-resolved CARS signal to study the interplay of different diagrams. Expressions are given for all five diagrams which can contribute to the CARS signal in our case.