Structural studies of Cr-doped mullite derived from single-phase precursors

Cr-doped mullites were prepared from single-phase precursors containing up to 9.60 wt% Cr₂O₃ using a sol-gel technique followed by thermal treatment. Particle induced X-ray emission spectroscopy and X-ray powder diffraction were used to characterize the samples. Mullites were orthorhombic, space group Pbam. Cr doping caused the increase of unit-cell parameters. Strongest expansion was noticed along c-axis followed by a and b (Δc/c=0.089, Δa/a=0.061, Δb/b=0.045% per mole Cr₂O₃). A second phase, namely θ-(Al,Cr)₂O₃, was revealed by XRD in the sample containing 9.60 wt% Cr₂O₃. The structure of mullites was refined by the Rietveld method, location of Cr³⁺ was performed by the EPR spectroscopy. At low chromium doping level (Cr₂O₃ content less than ∼5 wt%) Cr³⁺ ions were substituted for Al³⁺ in the AlO₆ octahedra of the mullite structure (M1 site). For higher doping level, Cr³⁺ ions were additionally substituted for Al³⁺ in the AlO₆ octahedra of the second phase [θ-(Al,Cr)₂O₃ at 1400 °C, or α-(Al,Cr)₂O₃ at 1600 °C] which segregated in the system. Substitution of Cr³⁺ for Al³⁺ on M1 site in the mullite structure resulted in increase of average distances in (M1)O₆ octahedron and decrease of average distances in T*O₄ tetrahedron, while average distances in TO₄ tetrahedron stayed almost constant.     

Conversion of single-stranded oligonucleotides into cloned duplexes and its consecutive application to short artificial genes.

A general method to convert single-stranded, chemically synthesized oligonucleotides into cloned duplexes is described. Oligonucleotides supplied with 3'-terminal extensions that are complementary to 3'-protruding ends obtained by certain restriction enzymes can be cloned either directly or with the help of an adapter molecule into double-stranded vectors. Two methods have also been developed for consecutive cloning applications. According to these methods, the synthetic oligonucleotides (and their enzymatically prepared complementary strands) are joined, one after the other, inside a cloning vector, each joining requiring one cloning step. Synthetic genes are thus built up from oligonucleotides corresponding to only one strand of the DNA. The sequential assembly of the cloned duplex takes place in the 5' to 3' direction. Each oligonucleotide is supplied with a four-nucleotide-long 3'-terminal extension, but this sequence is eliminated when the joining takes place, leaving no limiting sequence between the oligonucleotides. The two consecutive cloning methods, the adapter and the polycloning site methods, are illustrated by the assembly of short artificial genes.     

Strength of cylinder joint adhesively bonded by coupling

Summary A method of joining two metal cylindrical shafts with adhesive coupling is proposed. Two cylindrical shafts with the same diameter are connected by bonding through a cylindrical coupling with epoxy resin. The strength of the shaft joint under tensile loading and torsional loading is investigated analytically and experimentally. The stress and strain distributions of the shaft joint is analyzed by the finite element method. The analyzed strain distributions in the joint are compared with experimental values. The joint strength is predicted by applying the strength laws of shafts, coupling, adhesive layer and adhesive interface between shaft and adhesive coupling. The effects of the coupling dimension on the joint strength are examined. It is shown that the adhesive shaft joint can transfer the load by which the cylindrical shafts are plastically deformed.This paper was refined by the author, K. Ikegami, during statying at Technische Universität München under the support of Deutscher Akademischer Austauschdients. The author is grateful to Professor Lippmann of Technische Universität München who is the host professor of the support.     

Neocompact Sets and the Fixed Point Property

We use a newly introduced concept of neocompactness to study problems from metric fixed point theory. In particular, we give a sufficient condition for a superreflexive Banach space X to have the fixed point property and obtain shorter proofs of some well-known results in that theory.     

Thermophoresis in laminar flow over cold inclined plates with variable properties

This paper deals with the analysis of two dimensional laminar thermophoretic flow over inclined plates. Cold wall conditions are assumed and the governing equations are solved by a finite difference marching technique. Results for the hydrodynamic, thermal and particle concentration boundary layers are obtained over a wide range of parameters. Special emphasis is placed on the external aerosol particle deposition process.     

Untersuchung des anisotropen Kriechverhaltens vorgeschädigter Werkstoffe am austenitischen Stahl X8 CrNiMoNb 16 16

Übersicht Ziel der Untersuchung ist es, den Einfluß von Kriechschädigung und Belastungsvorgeschichte auf das weitere Kriechverhalten nach einer Änderung der Belastungsrichtung zu bestimmen. Die ermittelten Kriechbruchzeiten werden stark von der Änderung der Belastungsrichtung beeinflußt. Dieses Verhalten wird mit einer tensoriell nichtlinearen Theorie erklärt, indem man den Einfluß der Vorschädigung mit einem zweistufigen Tensor darstellt.

---

     

Hindered motions in a ketonea-urea inclusion compound. An ESR and ENDOR study

We have studied by ESR and ENDOR spectroscopy the free radicals produced in γ-irradiated inclusion compound formed between the ketone 10-nonadecanone and urea. Only one type of long lived radical is formed by the removal of an α-proton from the ketone. The hyperfine (hf) coupling constants of the α- and β-protons of the radicals have been measured by ESR at different temperatures in the range 110–292 K and at different orientations of the crystals. The hf coupling of the γ-protons of the radical and of the urea protons have been studied by ENDOR. The temperature and angular dependences of the coupling constants have been analyzed in terms of the internal and overall motions of the radical inside the hexagonal channels formed by the urea molecules. It has been found that the radical cannot perform complete reorientations around the long molecular axis, but it undergoes restricted rotational diffusion. This process is explained by assuming a coupling between the rotational and translational degrees of freedom of the radical inside the urea channels.