Comparison of slurry mixing and dry milling in laboratory sample preparation for determination of ochratoxin A and deoxynivalenol in wheat

The significance of laboratory sample preparation for the determination of two important mycotoxins, ochratoxin A (OTA) and deoxynivalenol (DON), in wheat was investigated by comparing water-slurry mixing and dry-milling procedures. The distribution of OTA and DON in 10 kg samples of naturally contaminated wheat was established by analyzing one hundred 100 g subsamples of each sample. A normal distribution and a good repeatability of DON measurements was observed for both water-slurry mixing (mean 2290 microg/kg, CV 4.6%, median 2290 microg/kg) and dry milling (mean 2310 microg/kg, CV 6.4%, median 2290 microg/kg) procedures. For OTA determinations, reliable results could be obtained only by slurry mixing sample preparation (mean 2.62 microg/kg, CV 4.0%, median 2.62 microg/kg), whereas dry-milling comminution resulted in an inhomogeneous distribution with a high variability (mean 0.83 microg/kg, CV 75.2%, median 0.60 microg/kg) and a positive skewness (2.12). Ad hoc experiments were performed on different size portions of the same sample (10 kg) to assess accuracy and precision of the comminution/homogenization procedures (slurry mixing and dry milling). Very good results were obtained for DON determination with both procedures in terms of accuracy (>98.7% of the "weighted value") and precision (CV <3%). For OTA determination good results were only obtained by slurry mixing (99.4% of the "weighted value," CV 10%), whereas dry milling provided results with low accuracy (43.2% of the "weighted value") and high variability (CV 110%). This study clearly demonstrated that sample preparation by slurry mixing is strictly necessary to obtain reliable laboratory samples for OTA determination in wheat to minimize misclassification of acceptable/rejectable lots, mainly within official control.     

Photoisomerization and relaxation dynamics of a structurally modified biomimetic photoswitch

Recent experimental and theoretical studies on N-alkylated indanylidene pyrroline Schiff bases (NAIP) show that these compounds exhibit biomimetic photoisomerization analogous to that in the chromophore of rhodopsin. The NAIP compounds studied previously isomerize rapidly and often evolve coherently on the ground-electronic surface after reaction. We present the results of transient electronic absorption spectroscopy on dMe-OMe-NAIP, a newly synthesized NAIP analogue that differs from other NAIP compounds in the substituents on its pyrrolinium ring. Following excitation with 400 nm light, dMe-OMe-NAIP relaxes from the electronic-excited state in less than 500 fs, which is slower than in other analogues, and does not show the prominent oscillations observed in other NAIP compounds. A reduction in the amount of twisting between the rings caused by removal of the methyl group is likely responsible for the slower isomerization. Measurements in solvents of varying viscosity and structure suggest that intramolecular processes dominate the relaxation of nascent photoproducts.     

A tetraethylene glycol dimethylether-lithium bis(oxalate)borate (TEGDME-LiBOB) electrolyte for advanced lithium ion batteries

Tetraethylene glycol dimethylether-lithium bis(oxalate)borate (TEGDME-LiBOB) electrolyte is here studied. Electrochemical impedance spectroscopy (EIS) measurements demonstrate that the electrolyte has conductivity higher than 10^− 3 S cm^− 1 at room temperature and about 10^− 2 S cm^− 1 at 60 °C, while thermogravimetry indicates a stability extending up to 180 °C. Sweep voltammetry of the electrolyte shows anodic stability extending over 4.6 V vs. Li and cathodic peak at about 1.5 V vs. Li/Li⁺, caused by a decomposition of LiBOB salt, and following prevented by using a pre-treated Sn-C anode. Furthermore, LiFePO₄ electrode is successfully used as cathode in a lithium cell using the TEGDME-LiBOB electrolyte. The promising electrochemical results, the low cost and the very high safety level candidate the electrolyte here reported as a valid alternative to the conventional electrolyte based on fluorinated salts presently used in the lithium ion battery field.     

Powerful approach to heterocyclic skeletal diversity by sequential three-component reaction of amines, isothiocyanates, and 1,2-diaza-1,3-dienes

By highly efficient, one-pot, three-component reactions, combining one set of 1,2-diaza-1,3-dienes (DDs), primary amines, and isothiocyanates in a different sequential order of addition, heterocyclic skeletal diversity can be achieved. The key feature discriminating the different heterocyclic core formation is the availability of the N or S heteronucleophile to give the first Michael addition step affording regioselective substituted 2-thiohydantoins or 2-iminothiazolidinones. The hydrazone or enehydrazino side chain at the 5-position of both heterocycles represents a valuable functionality to reach novel 5-hydroxyethylidene derivatives difficult to obtain by other methods.     

Synthesis, DNA-binding and antiproliferative properties of acridine and 5-methylacridine derivatives

Several acridine derivatives were synthesized and their anti-proliferative activity was determined. The most active molecules were derivatives of 5-methylacridine-4-carboxylic acid. The DNA binding properties of the synthesized acridines were analyzed by competitive dialysis and compared with the anti-proliferative activities. While inactive acridine derivatives showed high selectivity for G-quadruplex structures, the most active 5-methylacridine-4-carboxamide derivatives had high affinity for DNA but showed poor specificity. An NMR titration study was performed with the most active 5-methylacridine-4-carboxamide, confirming the high affinity of this compound for both duplex and quadruplex DNAs.     

Influence of the solvent representation on vibrational entropy calculations: Generalized born versus distance‐dependent dielectric model

The harmonic model is the most popular approximation for estimating the “configurational” entropy of a solute in molecular mechanics/Poisson‐Boltzmann solvent accessible surface area (MM/PBSA)‐type binding free energy calculations. Here, we investigate the influence of the solvent representation in the harmonic model by comparing estimates of changes in the vibrational entropies for 30 trypsin/ligand complexes on ligand binding. Second derivatives of Amber generalized Born (GB) solvation models are available in the nucleic acid builder code. They allow one to use these models for the calculation of vibrational entropies instead of using a simpler solvation model based on a distance‐dependent dielectric (DDD) constant. Estimates of changes in the vibrational entropies obtained with a DDD model are systematically and significantly larger, by on average, 6 kcal mol^?1 (at T = 300 K), than estimates obtained with a GB model and so are more favorable for complex formation. The difference becomes larger the more the vibrational entropy contribution disfavors complex formation, that is, the larger the ligand is (for the complexes considered here). A structural decomposition of the estimates into per‐residue contributions reveals polar interactions between the ligand and the surrounding protein, in particular involving charged nitrogens, as a main source of the differences. Snapshots minimized with the DDD model showed a structural deviation from snapshots minimized in explicit water that is larger by, on average, 0.5 Å RMSD compared to snapshots that were minimized with GB^HCT. As experimental vibrational entropies of biomacromolecules are elusive, there is no direct way to establish a solvent model's superiority. Thus, we can only recommend using the GB harmonic model for vibrational entropy calculations based on the reasoning that smaller structural deviations should point to the implicit solvent model that closer approximates the energy landscape of the solute in explicit solvent. © 2012 Wiley Periodicals, Inc.     

Double-layer effects and distance dependence of electron transfer in reduction of nitro aromatic radical anions

The first example of the effect of an electric double layer on the reduction of electrochemically generated radical species is reported. The anion radical of methyl 5-(2,4-dichlorophenoxy)-2-nitrobenzoate (pesticide bifenox) is electrochemically reduced in acetonitrile to a phenylhydroxylamine derivative in a process involving three electrons. This heterogeneous reaction is strongly influenced by the concentration and nature of the cation of the indifferent electrolyte. Depending on the type of tetraalkylammonium cation, the redox potential changes by 0.45 V. The kinetic parameters were obtained for five tetraalkylammonium hexafluorophosphate salts. The Frumkin correction, which assumes that the outer Helmholtz plane coincides with the reaction site, was applied to kinetic data of the radical anion reduction. The correction of the apparent rate accounted for the observed effect only in the case of tetramethylammonium salt. The presence of higher tetraalkylammonium homologues causes deviations from the predicted dependence of the electron-transfer rate on the phi2 potential of the outer Helmholtz plane. Hence, the nature of the cation of the electrolyte exerts a further effect extending beyond the electrostatic repulsion only. The corrected rate of electron transfer decreases exponentially with increasing size of the alkyl chain of the indifferent electrolyte cation in the order methyl > ethyl > propyl > butyl > hexyl. The rate decay is characterized by an exponent beta = 0.83. This confirms that the reaction plane for the reduction of the bifenox radical anion is different for each electrolyte. Due to this fact the Frumkin correction cannot fully account for the observed dependence of the heterogeneous rate on the solution composition. The observed effect is not specific to the bifenox radical. A similar influence of the concentration and nature of the cation of the indifferent electrolyte was observed for other nitro compounds, namely, nitrobenzene, nitrobenzoate, and nitrofen.     

Development and validation of HPLC methods for the analysis of phenethylamine and indoloquinazoline alkaloids in Evodia species

The aim of this study was to evaluate the chromatographic performance of a PEG stationary phase, in comparison with those of C18 columns, for the HPLC analysis of phenethylamine ((+/-)-synephrine) and indoloquinazoline (rutaecarpine and evodiamine) alkaloids in methanolic extracts of fruits of Evodia rutaecarpa (Juss.) Benth. and E. rutaecarpa (Juss.) Benth. var. officinalis (Dode) Huang (i.e., E. officinalis Dode) (Rutaceae family). The method was validated and showed good linearity, precision, accuracy, sensitivity, and specificity. The highest content of both phenethylamine and indoloquinazoline alkaloids was found in methanolic fruit extracts of E. rutaecarpa, and it was closely related to the degree of maturity. E. officinalis fruits displayed low amounts of both types of alkaloids. Furthermore, an enantioselective HPLC method for the enantioseparation of (+/-)-synephrine from Evodia fruits was applied, by using a protein-based chiral stationary phase with cellobiohydrolase (CBH) as the chiral selector (Chiral-CBH). Isolation of synephrine from Evodia aqueous fruit extracts was carried out by strong cation-exchange SPE. The results of the application of the method to the analysis of Evodia samples showed that (-)-synephrine was the main component while (+)-synephrine was present in low concentration.     

Comparison of bovine and porcine beta-lactoglobulin: a mass spectrometric analysis

Nano-electrospray-ionization mass spectrometry (nano-ESI-MS) is applied to comparison of bovine and porcine beta-lactoglobulin (BLG and PLG). The conformational and oligomeric properties of the two proteins under different solvent and experimental conditions are analyzed. The pH-dependence of dimerization is described for the pH range 2-11. The results indicate maximal dimer accumulation at pH 6 for BLG and pH 4 for PLG, as well as a lower stability of the PLG dimer at pH 4 compared to BLG at pH 6. Conformational stability appears to be higher for BLG at acidic pH, but higher for PLG at basic pH. The higher stability of BLG at low pH is revealed by means of either chemical or thermal denaturation. Equilibrium folding intermediates of both proteins are detected. Finally, conditions are found that promote dissociation of the BLG dimer at pH 6 into folded monomers.     

Crystal structure of the trigonal form of isotactic polypropylene as an example of density-driven polymer structure

Propene-hexene copolymers crystallize in a new polymorphic form of isotactic polypropylene when the concentration of hexene is higher than nearly 10-15 mol %. The hexene units are included in the crystals, inducing an increase of density that allows crystallization of 3-fold helical chains in a trigonal unit cell according to the space group R3c or Rc, where the helical symmetry of the chains is maintained in the crystal lattice. The structure of this new form is similar to those of isotactic polybutene and polystyrene and does not crystallize in polypropylene homopolymer because it would have too low density. The crystal structure of isotactic polypropylene is therefore no longer an exception to the principles of polymer crystallography, but the new structure represents the fulfillment of these principles and indicates that the packing of polymer molecules is mainly driven by density.