Structural and magnetic properties of hexagonal perovskites La1.2Sr2.7MO7.33 (M = Ru, Ir) containing peroxide ions

The structures of the new compound La(1.2)Sr(2.7)IrO(7.33) and the recently discovered La(1.2)Sr(2.7)RuO(7.33) have been solved using a combination of X-ray and neutron diffraction. Both compounds crystallize in the trigonal space group Rm and consist of isolated MO6 (M = Ru, Ir) octahedra, which are arranged in well-defined hexagonal perovskite slabs. These slabs are separated by (Sr2O(1+delta)) layers containing both O2- and (O2)2- ions. The composition can therefore be written as La(1.2)Sr(2.7)MO(7-delta)(O2)delta with delta = 0.33. Results of the magnetic susceptibility and XANES measurements show that the transition metal cations are in a pentavalent state. While in La(1.2)Sr(2.7)RuO(7.33) an antiferromagnetic interaction between the Ru5+ ions is found, La(1.2)Sr(2.7)IrO(7.33) shows a very small temperature-independent paramagnetism down to 1.8 K due to the strong spin-orbit coupling characteristic for the 5d element iridium.     

Practical asymmetric enzymatic reduction through discovery of a dehydrogenase-compatible biphasic reaction media

[reaction: see text] An enzyme-compatible biphasic reaction media for the asymmetric biocatalytic reduction of ketones with in situ cofactor regeneration has been developed. In this biphasic reaction media, which is advantageous for reactions at higher substrate concentrations, both enzymes (alcohol dehydrogenase and FDH from Candida boidinii) remain stable. The reductions with poorly water-soluble ketones were carried out at substrate concentrations of 10-200 mM, and the optically active (S)-alcohols were formed with moderate to good conversions and with up to >99% ee.     

An on-line potentiometric sequential injection titration process analyser for the determination of acetic acid

An on-line potentiometric sequential injection titration process analyser for the determination of acetic acid is proposed. A solution of 0.1 mol L(-1) sodium chloride is used as carrier. Titration is achieved by aspirating acetic acid samples between two strong base-zone volumes into a holding coil and by channelling the stack of well-defined zones with flow reversal through a reaction coil to a potentiometric sensor where the peak widths were measured. A linear relationship between peak width and logarithm of the acid concentration was obtained in the range 1-9 g/100 mL. Vinegar samples were analysed without any sample pre-treatment. The method has a relative standard deviation of 0.4% with a sample frequency of 28 samples per hour. The results revealed good agreement between the proposed sequential injection and an automated batch titration method.     

Catalysts for the living insertion polymerization of alkenes: access to new polyolefin architectures using Ziegler-Natta chemistry

Coordination-insertion polymerization systems have long been superior to their anionic, cationic, and radical polymerization counterparts with regard to stereochemical control. However, until five years ago, these metal-based insertion methods were inferior to ionic and radical mechanisms in the category of living polymerization, which is simply a polymerization that occurs with rapid initiation and negligible chain termination or transfer. In the last half decade, the living insertion polymerization of unactivated olefins has emerged as a powerful tool for the synthesis of new polymer architectures. Materials available today by this route range from simple homopolymers such as linear and branched polyethylene, to atactic or tactic poly(alpha-olefins), to end-functionalized polymers and block copolymers. This review article summarizes recent developments in this rapidly growing research area at the interface of synthetic and mechanistic organometallic chemistry, polymer chemistry, and materials science. While special emphasis is placed on polymer properties and novel polymeric architectures, most of which were inaccessible just a decade ago, important achievements with respect to ligand and catalyst design are also highlighted.     

Synthesis of part of a proposed insulin second messenger glycosylinositol phosphate and the inner core of glycosylphosphatidylinositol anchors

Synthesis of 6-O-(2-amino-2-deoxy--D-glucopyranosyl)-D-myo-inositol 1-phosphate, an inner core structure found in various glycosylphosphatidylinositols, and the corresponding 1,2-cyclic phosphate, proposed as part of an insulin second messenger glycosylinositol phosphate, is described. Chirality in the inositol part of the molecule was achieved by the use of a known D-camphor acetal intermediate. The glycosylation used 4-O-allyl-2-azido-3,6-di-O-benzyl-2-deoxy--D-glucopyranosyl fluoride as glycosyl donor. The allyl group can be chemoselectively removed, opening a route to oligosaccharides bound to the 4-position of the glucosamine unit. The phosphorylation was accomplished by the phosphoramidate procedure.     

Nordesferriferrithiocin. Comparative Coordination Chemistry of a Prospective Therapeutic Iron Chelating Agent(1)

Nordesferriferrithiocin, NDFFTH(2), is a derivative of the siderophore desferriferrithiocin, DFFTH(2), in which the methyl group is substituted by a hydrogen atom. Both compounds show high oral activity as possible drugs for the treatment of iron overload. While DFFTH(2) is significantly toxic, NDFFTH(2) exhibits a lower toxicity and offers a much better therapeutic window than other orally active iron chelators. In this study, complexes of DFFTH(2) and NDFFTH(2) with various trivalent metals have been synthesized and characterized. Five isomers (the maximum possible) have been observed in the case of [Co(DFFT)(2)](-) in solution, as proved by (1)H-NMR measurements. Although normally labile, complexes of Al(3+) ([Al(DFFT)(2)](-)) have been separated by HPLC. In general, DFFTH(2) forms kinetically inert complexes whereas complexes of NDFFTH(2) tend to isomerize quickly in solution, as indicated by CD spectroscopy of separated HPLC fractions of [Cr(NDFFT)(2)](-). The most stable isomers of the aluminum complexes of both ligands have been characterized by X-ray crystallography; K[Al(DFFT)(2)] crystallizes from methanol/diethyl ether in the orthorhombic space group P2(1)2(1)2 with a = 11.238(3) ?, b = 31.719(11) ?, c = 7.684(2) ?, V = 2739.2(24) ?(3), and Z = 4. This isomer has the mer-(N,O-Lambda)(S,S) configuration, while K[Al(NDFFT)(2)] crystallizes from methanol/diethyl ether in the space group P6(1) (a = 21.269(8) ?, c = 9.643(3) ?, V = 3777.8(42) ?(3), Z = 6) and has the same coordination geometry. The solution thermodynamics of the Al(3+), Ga(3+), and Fe(3+) complexes have been studied by spectrophotometric titration. The stability constants (log K) are 23.6(1), 29.2(3), and 31.04(3), respectively, for the DFFTH(2) complexes and 22.0(1), 27.8(2), and 29.09(3), respectively, for the NDFFTH(2) complexes. Cyclic voltammograms of both iron complexes have been recorded in water at a carbon disk working electrode and in DMF at a graphite working electrode. The reduction waves measured in DMF indicate no reversibility whereas in water a quasi-reversible reduction is observed. The reduction potentials (E(1/2)'s) in water are -166 mV for [Fe(DFFT)(2)](-) and -97 mV for [Fe(NDFFT)(2)](-) versus NHE. These potentials are well in the range for biological reductants, which makes possible an in vivo reduction mechanism for the iron removal from the siderophore.     

PHYTOCHROME EVOLUTION: A PHYLOGENETIC TREE WITH THE FIRST COMPLETE SEQUENCE OF PHYTOCHROME FROM A CRYPTOGAMIC PLANT: (Selaginella martensii SPRING)

We have sequenced cDNA and genomic clones coding for phytochrome of the fern Selaginella. On the amino acid level, this phytochrome shares sequence homologies with phytochromes of higher plants which range between 62 (phytochrome B of Arabidopsis) and 55 (56)% [phytochrome C of Arabidopsis (Avena)]. Introns in the Selaginella gene are short and occupy positions known from phytochrome sequences of higher plants. A rooted phylogenetic tree based on mutation distances puts Selaginella phytochrome closest to the hypothetical ancestor. A similar tree arises if the tree is constructed with partial sequences (about 200 amino acids) around the chromophore attachment site. An extension of this tree by sequences of other cryptogamic plants (Mougeotia, Ceratodon, Psilotum) shows all these sequences including those of the phytochromes B and C of Arabidopsis on a branch, well separated from the branch formed by phytochromes known to accumulate in etiolated plants. The rooted phytochrome phylogenetic tree, however, is difficult to reconcile with the fossil record.     

Templated ceramic microstructures by using the breath-figure method

We describe the synthesis of two cyclobutadiene(cyclopentadienyl)cobalt-containing poly(p-phenylene ethynylene)s (PPEs) and their use as precursors for stable ceramic surface coatings. Organometallic PPEs were shaped into hexagonally ordered assemblies by using the breath-figure method. Such breath figures can be washed away with an appropriate solvent. Upon pyrolysis at 500 degrees C under either nitrogen or air, the bubble arrays persist as ceramics and are insoluble in organic solvents or water. The formed pyrolyzed bubble arrays were analyzed by optical and scanning electron microscopy, as well as energy dispersive X-ray microanalysis (EDX). The composition of the ceramic materials is discussed based on EDX and IR data.     

Characterization of cocoa butters and other vegetable fats by pyrolysis-mass spectrometry

Pyrolysis Mass Spectrometry (Py-MS) was used for the discrimination of cocoa butters from other vegetable fats. Mass spectra ranging from 50 amu to 250 amu were analyzed by principal component analysis (PCA) and with neural nets. The application of neural nets leads to a good discrimination between the two classes. Detailed analysis of the nets revealed that only the first 60 masses were used within the net. The use of PCA requires a careful selection of the number of masses included in the calculation. Canonical variance analysis was applied to determine the significant masses. Optimal performance of PCA was observed only using the first 22 significant masses. Most of these masses were different from the ones used by the neural net. It seems that the mass spectra obtained by Py-MS contain sufficient information for the discrimination of pure cocoa butter from other vegetable fats, but none of the methods seems to be able to extract all information available. Neural net provides a very robust method for this task and no prior data selection was necessary. Received: 13 May 1996 / Revised: 7 August 1996 / Accepted: 7 August 1996     

Covalent attachment of a nickel nitrilotriacetic acid group to a germanium attenuated total reflectance element

The surface of a germanium internal reflectance element (IRE) was modified to bind 6X-histidine (his)-tagged biomolecules. The step-by-step surface modification was monitored via single-pass attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FT-IR). Initially an adlayer of 7-octenyltrimethoxysilane (7-OTMS) was formed on the Ge crystal through the surface hydroxyl groups, which were produced via ozonolysis of the Ge surface. The vinyl moiety of 7-OTMS was oxidized to a carboxylic acid, which was activated by 1,1'-carbonydiimidazole (CDI) to produce a labile imidazole. The labile imidazole that resulted from the CDI coupling was then displaced by the primary amine of nitrilotriacetic acid (NTA). Nickel sulfate was added to the system, and it coordinated with the three carbonyl groups and the nitrogen on NTA, thus leaving the ability of Ni to coordinate with two adjacent histidine residues. Binding of his-tagged biotin to nickel nitrilotriacetic acid (Ni-NTA) was observed by ATR-FT-IR spectroscopy. The surface modification method presented in this paper had minimal nonspecific binding, the Ni-NTA surface was reusable if stored properly, and complete removal of the organic surface was achievable.