Präparative chromatographische Enantiomerentrennung von synthetisch nützlichen cyclischen Acetalen

Preparative Chromatographic Resolution of Synthetically Useful Cyclic Acetals Racemic cyclic acetals derived from aldehydes and glycine, glycolic acid, thioglycolic acid, formylacetic acid, and acetoacetic acid (oxazolidinones 4 – 13 , dioxolanones 14 , 15 , oxathiolanone 16 , dioxinones 17 – 23 ) are resolved by preparative high-pressure liquid chromatography on silica gel coated with the polymer from N-acryloylphenylalanine ethyl ester (Chiraspher®). The separation factors α range from1,1 to 2,4. Use of a Prepbar®-chromatography system allows injection of several grams at a time. The enantiomeric acetals thus obtained are fully characterized. First application to amino-acid synthesis are mentioned.     

Practical asymmetric enzymatic reduction through discovery of a dehydrogenase-compatible biphasic reaction media

[reaction: see text] An enzyme-compatible biphasic reaction media for the asymmetric biocatalytic reduction of ketones with in situ cofactor regeneration has been developed. In this biphasic reaction media, which is advantageous for reactions at higher substrate concentrations, both enzymes (alcohol dehydrogenase and FDH from Candida boidinii) remain stable. The reductions with poorly water-soluble ketones were carried out at substrate concentrations of 10-200 mM, and the optically active (S)-alcohols were formed with moderate to good conversions and with up to >99% ee.     

An on-line potentiometric sequential injection titration process analyser for the determination of acetic acid

An on-line potentiometric sequential injection titration process analyser for the determination of acetic acid is proposed. A solution of 0.1 mol L(-1) sodium chloride is used as carrier. Titration is achieved by aspirating acetic acid samples between two strong base-zone volumes into a holding coil and by channelling the stack of well-defined zones with flow reversal through a reaction coil to a potentiometric sensor where the peak widths were measured. A linear relationship between peak width and logarithm of the acid concentration was obtained in the range 1-9 g/100 mL. Vinegar samples were analysed without any sample pre-treatment. The method has a relative standard deviation of 0.4% with a sample frequency of 28 samples per hour. The results revealed good agreement between the proposed sequential injection and an automated batch titration method.     

Catalysts for the living insertion polymerization of alkenes: access to new polyolefin architectures using Ziegler-Natta chemistry

Coordination-insertion polymerization systems have long been superior to their anionic, cationic, and radical polymerization counterparts with regard to stereochemical control. However, until five years ago, these metal-based insertion methods were inferior to ionic and radical mechanisms in the category of living polymerization, which is simply a polymerization that occurs with rapid initiation and negligible chain termination or transfer. In the last half decade, the living insertion polymerization of unactivated olefins has emerged as a powerful tool for the synthesis of new polymer architectures. Materials available today by this route range from simple homopolymers such as linear and branched polyethylene, to atactic or tactic poly(alpha-olefins), to end-functionalized polymers and block copolymers. This review article summarizes recent developments in this rapidly growing research area at the interface of synthetic and mechanistic organometallic chemistry, polymer chemistry, and materials science. While special emphasis is placed on polymer properties and novel polymeric architectures, most of which were inaccessible just a decade ago, important achievements with respect to ligand and catalyst design are also highlighted.     

Matrix-assisted laser desorption/ionization mass spectrometry with additives to 2,5-dihydroxybenzoic acid

Selected benzoic acid derivatives and related substances were used as additives to 2,5-dihydroxybenzoic acid (2,5DHB) and the performance of the mixtures in matrix-assisted laser desorption/ionization mass spectrometry was investigated. Using benzoic acid derivatives substituted at position 2 and/or 5 or related substances as a co-matrix in the 1–10% range with 2,5DHB results in improved ion yields and signal-to-noise ratio of analyte molecules, especially for the high-mass range. The enhanced performance is prominent for 2-hydroxy-5-methoxybenzoic acid and exists for both proteins and oligosaccharides. It is suggested that the improvement is caused by a disorder in the 2,5DHB crystal lattice allowing ‘softer’ desorption. Charge transfer from matrix ions to additive molecules at the expense of analyte ionization gives a simple explanation for the deteriorating effects of some tested additives.     

Boron implantation in Si: Channeling effects studied by SIMS and simulation

The axial channeling behaviour of boron implants in <100>, <110> and <111> silicon wafers is investigated by SIMS. Large differences of channeling characteristics such as channeled projected range (the projected range of channeled ions or channeling peak) and the fraction of channeled to implanted ions are observed among the three major crystal orientations. Within the critical angle, the channeling behaviour is very sensitive to the incidence beam angle with respect to crystal orientations. SIMS measurements are performed at different positions along several critical directions over a whole wafer. Well channeled profiles with an incidence beam angle to crystal orientations of 0 ° are obtained for each ion implantation energy and orientation. The results are used to test various models of ion implantation by simulation. A 3-parameter model for electronic stopping power of boron in silicon was proposed.     

Synthesis of part of a proposed insulin second messenger glycosylinositol phosphate and the inner core of glycosylphosphatidylinositol anchors

Synthesis of 6-O-(2-amino-2-deoxy--D-glucopyranosyl)-D-myo-inositol 1-phosphate, an inner core structure found in various glycosylphosphatidylinositols, and the corresponding 1,2-cyclic phosphate, proposed as part of an insulin second messenger glycosylinositol phosphate, is described. Chirality in the inositol part of the molecule was achieved by the use of a known D-camphor acetal intermediate. The glycosylation used 4-O-allyl-2-azido-3,6-di-O-benzyl-2-deoxy--D-glucopyranosyl fluoride as glycosyl donor. The allyl group can be chemoselectively removed, opening a route to oligosaccharides bound to the 4-position of the glucosamine unit. The phosphorylation was accomplished by the phosphoramidate procedure.     

A novel technique to specifically analyze the secretome of cells and tissues

The secretome of cells and tissues may reflect a broad variety of pathological conditions and thus represents a rich source of biomarkers. The identity of secreted proteins, usually isolated from cell supernatants or body fluids, is hardly accessible by direct proteome analysis, because these proteins are often masked by high amounts of proteins actually not secreted by the investigated cells. Here, we present a novel method for the specific detection of proteins secreted by human tissue specimen as well as cultured cells and chose liver as a model. The method is based on the metabolic labelling of proteins synthesized during a limited incubation period. Then, the cell supernatant is filtered, precipitated, and subjected to two-dimensional gel electrophoresis. Whereas fluorography detected a large number of proteins derived from residual plasma and dead cells, the autoradiographs selectively displayed genuinely secreted proteins. We demonstrate the feasibility of this approach by means of the secretomes of the hepatocellular carcinoma-derived cell line HepG2 and human liver slices. The selective identification of cell- and tissue-specific protein secretion profiles may help to identify novel sets of biomarkers for wide clinical applications.     

Anomalous grazing incidence small-angle x-ray scattering studies of platinum nanoparticles formed by cluster deposition

The size evolution of platinum nanoparticles formed on a SiO2/Si(111) substrate as a function of the level of surface coverage with deposited clusters has been investigated. The anisotropic shapes of sub-nanometer-size nanoparticles are changed to isotropic on the amorphous substrate as their sizes increased. Using anomalous grazing incidence small-angle x-ray scattering (AGISAXS), the scattering from nanoparticles on the surface of a substrate is well separated from that of surface roughness and fluorescence. We show that AGISAXS is a very effective method to subtract the background and can provide unbiased information about particle sizes of less than 1 nm.     

Sr3(BS3)2 und Sr3(B3S6)2: Zwei neue nicht‐oxidische Chalkogenoborate mit trigonal‐planar koordiniertem Bor

Sr₃(BS₃)₂ and Sr₃(B₃S₆)₂: Two Novel Non‐oxidic Chalcogenoborates with Boron in a Trigonal‐Planar Coordination The thioborates Sr₃(BS₃)₂ and Sr₃(B₃S₆)₂ were prepared from strontium sulfide, amorphous boron and sulfur in solid state reactions at a temperature of 1123 K. In a systematic study on the structural cation influence on this type of ternary compounds, the crystal structures were determined by single crystal X‐ray diffraction. Sr₃(BS₃)₂ crystallizes in the monoclinic spacegroup C2/c (No. 15) with a = 10.187(4) Å, b = 6.610(2) Å, c = 15.411(7) Å, β = 102.24(3)° and Z = 4. The crystal structure of Sr₃(B₃S₆)₂ is trigonal, spacegroup R3¯ (Nr. 148), with a = 8.605(1) Å, c = 21.542(4) Å and Z = 3. Sr₃(BS₃)₂ contains isolated [BS₃]^3— anions with boron in a trigonal‐planar coordination. The strontium cations are found between the layers of orthothioborate anions. Sr₃(B₃S₆)₂ consists of cyclic [B₃S₆]^3— anions and strontium cations, respectively.