Prediction of Interfacial Interactions between Polymer Layers

Summary: Results of a study on polymer surface modification using heterofunctional polyperoxides are presented. A prognostic model of the polymer surface modifier efficiency was developed on the basis of obtained data. It was shown that implementation of demands to the macromolecule composition during development of new peroxide-containing modifiers in combination with sufficient peroxide group reactivity increased efficiency of the polymer surface modification.     

Probing adsorption sites of silica-supported platinum with (13)C(16)O + (12)C(16)O and (13)C(18)O + (12)C(16)O mixtures: a comparative fourier transform infrared investigation

A comparative investigation of the adsorption of (13)C(18)O + (12)C(16)O and (13)C(16)O + (12)C(16)O mixtures on silica-supported Pt has been conducted. It is advantageous to use (13)C(18)O + (12)C(16)O mixtures rather than (13)C(16)O + (12)C(16)O to probe the adsorption sites and electronic state of supported Group VIII metals because the vibrational bands of the adsorbed (13)C(18)O and (12)C(16)O isotopic molecules do not overlap. In addition, while an intensity redistribution suppresses the lower-frequency band with adsorbed (13)C(16)O and (12)C(16)O with vibrational frequencies differing by 50 cm(-1), the intensity redistribution is less pronounced with the adsorbed (13)C(18)O and (12)C(16)O in which the frequency difference is 100 cm(-1). Moreover, the small intensity redistribution that does occur between the bands of adsorbed (13)C(18)O and (12)C(16)O still allows the detection of the vibrational band of adsorbed (13)C(18)O at (13)C(18)O gas-phase concentrations as low as 3%. At such low concentrations, the dipole-dipole interaction between adsorbed (13)C(18)O molecules is negligible, and, hence, both the singleton frequency and the dipole-dipole shift for adsorbed CO may be obtained in a single experiment. Two types of strongly bound and one type of weakly bound linear CO-Pt adsorption complexes have been identified and characterized by their singleton frequencies and dipole-dipole coupling shifts. The origin of these CO adsorption modes is discussed.     

An Improved Synthesis of Elvitegravir

An improved process for the active pharmaceutical ingredient of a new HIV integrase inhibitor elvitegravir ( 1 ) has been developed. It starts from commercially available 2,4‐dimethoxyacetophenone, which is selectively halogenated into the position 5. The 5‐halo acetophenones are condensed with dialkyl carbonates to give the corresponding benzoylacetates. Their treatment with N,N‐dimethylformamide dimethyl acetal followed by (S)‐valinol then provided the corresponding intermediate benzoyl acrylates. Cyclization to the required 1,4‐dihydroquinolin‐4‐oxo derivatives by aromatic nucleophilic substitution of the 2‐methoxy group was achieved by treatment with N,O‐bis(trimethylsilyl)‐acetamide, which also protected the OH group as the trimethylsilyl derivative. Finally, the Negishi coupling with 2‐fluoro‐3‐chlorobenzylzinc bromide and the following hydrolysis provided elvitegravir ( 1 ). The preferred variant, the seven‐step procedure starting from 2,4‐dimethoxyacetophenone, provides elvitegravir in 29.3% yield.     

Thermal analysis and EPR study of copper species in mordenites prepared by conventional and microwave-assisted methods

The main work of this thesis is to study and discuss flame-retardant properties of the flexible polyurethane foam (FPUF) added with borax, expanded graphite (EG), and EG/Borax as flame retardant, respectively. The thermal behavior of samples has been using thermogravimetry (TG) and differential thermogravimetry in air. The activation energies for different stages of thermal degradation are obtained following the equation of Kissinger. The flammability parameters, including limiting oxygen index, rate of heat release, total heat release, yield of CO, yield of CO₂, and smoke production rate, were recorded simultaneously. The char structure was studied by SEM, and their thermal stability and evolved gaseous products were examined by TG analysis–Fourier transform infrared spectroscopy. By analyzing these data, it was concluded that most combustion parameters of FPUF were decreased by the treatment, especially for EG/Borax treatment, which indicated a synergistic effect of flame retardancy. Meanwhile, the probable flame retardation mechanism was proposed.     

Electron delocalization in mixed-valence butadienediyl-bridged diruthenium complexes

We report electrochemical and spectroelectrochemical investigations on the butadienediyl-bridged diruthenium complexes [{Ru(PPh₃)₂(CO)Cl}₂(μ-C₄H₄)] (1), [{Ru(PEt₃)₃(CO)Cl}₂(μ-C₄H₄)] (2), and [{Ru(PPh₃)₂(CO)Cl(NC₅H₄COOEt-4)}₂(μ-C₄H₄)] (3). All these complexes are oxidized in two consecutive one-electron steps separated by 315 to 680 mV, depending on the co-ligands. The first oxidation is a chemically and electrochemically reversible process whereas the second varies from nearly reversible to irreversible at room temperature. We have generated and investigated the mixed-valence monocations and observed CO band shifts of ca 25 cm⁻¹ and the appearance of new bands in the visible regime at ca 720 to 800 and 430 to 450 nm. The lower-energy band which tails into the near infrared has been assigned as a charge-resonance (or intervalence charge-transfer) absorption and used to estimate the electronic coupling parameter H _AB. Our investigations point to valence delocalization for 2 ⁺ , and nearly delocalized behavior for 1 ⁺ and 3 ⁺ . Even the complex with the smallest potential splitting is, however, fully delocalized on the longer ESR timescale, as is evident from the coupling pattern of the solution spectrum. Overall IR band shifts on full oxidation and the hyperfine splittings for 1 ⁺ argue for charge and spin delocalization onto the bridging C₄H₄ ligand. This issue has also been addressed by quantum chemical calculations employing DFT methods. Geometry optimizations at each oxidation level reveal inversion of the C–C bond pattern from a short–long–short to a long–short–long alteration and a bis(carbenic) structure at the dication stage. All spectroscopic features such as IR band shifts, average g-values and g-tensor anisotropies are fully reproduced by the calculations. Presented at the 3rd Chianti Electrochemistry Meeting, July 3.–9.2004, Certosa di Pontignano, Italy     

Aperiodic capillary electrophoresis method using an alternating current electric field for separation of macromolecules

Switching from direct current (DC) to alternating current (AC) electric fields has provided substantial improvements in various instrument techniques that use electric fields for manipulating with various liquid-based systems. For example, AC fields are now used in both light scattering and electroacoustic instruments for measuring xi-potential, largely replacing more traditional microelectrophoresis techniques that use DC fields. In this paper, we suggest a novel way to make a similar transition in the area of separation techniques, capillary electrophoresis (CE) in particular. Dielectrophoresis is one well-known separation effect in which a drifting motion of particles is produced in a "spatially nonhomogeneous" AC electric field. However, there is another field effect that also causes a similar drift of particles. Instead of a "spatially nonhomogeneous" field, this method relies on a "temporally nonhomogeneous" field, normally referred to as "aperiodic electrophoresis". Despite a number of recently published experimental and theoretical papers describing this effect, it is less well-known than dielectrophoresis. We present a short overview of some of the relevant papers. We point out for the first time the idea that "aperiodic electrophoresis" might be useful for separation of macromolecules. We suggest several new mechanisms that could induce this effect in a sufficiently strong AC electric field. This effect can be used as a basis for a new separation method having several important advantages over traditional CE. We present a simple scheme as an example illustrating this new method.     

Diethyl Fluoronitromethylphosphonate: Synthesis and Application in Nucleophilic Fluoroalkyl Additions

Diethyl fluoronitromethylphosphonate ( 3 ), a previously unknown compound, was synthesized by electrophilic fluorination of diethyl nitromethylphosphonate with Selectfluor. Base‐induced decomposition of 3 was studied by NMR spectroscopy, which identified diethyl fluorophosphate and fluoronitromethane as the main decomposition products. C?H acidities [pK_a values in dimethyl sulfoxide (DMSO)] of 3 , 1‐fluoro‐1‐phenylsulfonylmethanephosphonate ( 1 ; McCarthy’s reagent), tetraethyl fluoromethylenebisphosphonate ( 2 ), and some nonfluorinated phosphonates were computed, and a good correlation between calculated and experimental pK_a values was found. The calculated C?H acidities increased in the sequence 2 < 1 < 3 . Diethyl fluoronitromethylphosphonate ( 3 ) was applied in the Horner–Wadsworth–Emmons reaction with aldehydes and trifluoromethyl ketones to provide new 1‐fluoro‐1‐nitroalkenes with good to high stereoselectivities. Alkylation of 3 was successful only with iodomethane, however, conjugate additions of 3 to Michael acceptors such as α,β‐unsaturated carbonyl compounds, sulfones, and nitro compounds allowed access to variously modified diethyl 1‐fluoro‐1‐nitrophosphonates.     

Application of one-particle Green functions technique for calculation of vertical ionization potentials of closed-shell molecules described by CNDO/2 semiempirical Hamiltonian

A simple method of infinite summations of some dominant diagrams in the framework of the one-particle Green functions technique is suggested. This method for the calculation of the lowlying vertical ionization potentials of some simple closed-shell molecules described by CNDO/2 semiempirical Hamiltonian is applied. The obtained results are in quite-satisfactory agreement with the experimental values of the vertical ionization potentials measured by the photo-electron spectroscopy technique.     

Bestimmung des zwei- und dreiwertigen Eisens mit hydrazindithiocarbaminsaurem Hydrazonium auf kolorimetrischem oder spektrophotometrischem Wege

Zusammenfassung Das Hydrazoniumsalz der Hydrazindithiocarbaminsäure reagiert mit zweiwertigem Eisen unter Bildung eines violett gefärbten Komplexes. Diese Reaktion ist für die spektrophotometrische und kolorimetrische Bestimmung auch sehr geringer Mengen Eisen(II) gut anwendbar. Nach Reduktion mit Ascorbinsäure läßt sich auch Eisen(III) nach dieser Methode bestimmen. Der störende Einfluß anderer Kationen bzw. deren höchstzulässige Konzentration wurde ermittelt.

---

Summary The hydrazonium salt of hydrazine dithiocarbamic acid reacts with divalent iron to yield a violet complex. This reaction is well suited for the spectrophotometric and colorimetric determination of even slight quantities of iron(II). Iron(III) can also be determined in this manner after reduction with ascorbic acid. The interfering effect of other cations and their maximum permissible concentration were determined.

---

Résumé Le sel hydrazonium de l'acide hydrazinedithiocarbamique réagit avec le fer bivalent avec formation d'un complexe coloré violet. Cette réaction convient également fort bien à la détermination spectrophotométrique et colorimétrique de très petites quantités de fer(II). Cette méthode permet également de déterminer le fer(III) après réduction par l'acide ascorbique. L'influence gênante d'autres cations est indiquée par les auteurs ainsi que les limites supérieures des concentrations qu'ils ne doivent pas dépasser.

     

Electrochemical Detection of Host–Guest Interactions of Dicarboximide Pesticides with Cyclodextrins

Electrochemical methods sensitively detect the formation of host–guest complexes of cyclodextrins and three redox-active pesticides: vinclozoline (3-(3,5-dichlorophenyl)-5-methyl-5-vinyl-1,3-oxazolidine-2,4-dione), iprodione (3-(3,5-dichlorophenyl)-N-(1-methylethyl)-2,4-dioxo-1-imidazolidinecarboxamide), and procymidone (3-(3,5-dichloro-phenyl)-1,5-dimethyl-3-azabicyclo[3.1.0]hexane-2,4-dione). The protecting environment of the CD cavity allows a four-electron heterogeneous reaction leading to a preferential cleavage of the C–Cl bonds and conservation of the heterocycle structure for a further second electron transfer step. This interpretation is supported by numerical simulation of the voltammetric curves and by quantum-chemical calculations of the LUMO changes of vinclozoline. Electrochemical detection of these host–guest interactions is far superior to the spectral methods.