采用级联原子滤光器的新型卫星激光链路系统研究

提出级联佛克脱型原子滤光器(Linked VADOF)的新构想。从理论上分析并计算了级联佛克脱型原子滤光器的透射谱。结果表明，级联佛克脱型原子滤光器将佛克脱型原子滤光器的多峰改造为单峰结构，具有比佛克脱型原子滤光器更窄的线宽和更高的噪声抑制比。将这种新型结构应用于激光信标锁频。该锁频方案提高了信标光频率的稳定性。在此基础上，给出了发射端采用级联佛克脱型原子滤光器锁频，接收端采用法拉第型原子滤光器(FADOF)滤光的新型卫星激光链路系统。外场初步联调实验表明了该系统的可行性。     

Regular simple geodesic loops on a tetrahedron

A regular simple geodesic loop on a tetrahedron is a simple geodesic loop which does not pass through any vertex of the tetrahedron. It is evident that such loops meet each face of the tetrahedron. Among these loops, the minimal loops are those which meet each face exactly once. Necessary and sufficient conditions for the existence of minimal loops are obtained. These conditions fall naturally into two categories, conditions in the first category being called coherence conditions and conditions in the second category being called separation conditions. It is shown that for the existence of three distinct minimal loops through any point on the face of a tetrahedron it is necessary and sufficient that the tetrahedron be isosceles, which, in turn, amounts to the tetrahedron satisfying three coherence conditions. All other regular simple geodesic loops on an isosceles tetrahedron are then classified. Finally, coherence conditions for the existence of similar loops on an arbitrary tetrahedron are found.     

关于双重时序AR-MA模型的相关结构及与ARMA模型的比较

本文在文［４］的基础上讨论了双重时序ＡＲ（１）－ＭＡ（ｑ）模型的相关结构，在不假定白噪声序列为正态的情况下，证明了安鸿志［２］关于模型的相关结构的猜想是正确的，具体地构造了ＡＲ（１）－ＭＡ（３）模型的相关结构，并与ＡＲＭＡ模型进行了初步的比较，给出了一些抛砖引玉的讨论．     

鸟嘌呤和次黄嘌呤的铜络合物的吸附作用和伏安特性研究

本文研究了鸟瞟呤(Gua)和次黄嘌呤(Hxa)铜络合物在悬汞电极(HMDE)上的吸附作用和电极反应机理,溶液中形成的1:1络合物有强烈吸附性,通过分子结构的比较,推断出Cu~(2+)与Gua和Hxa的咪唑环N(7)和外环氧O(6)原子结合形成封闭的五元环。嘌呤环的π-电子有使分子呈平面吸附的趋势,但是Gua络合物分子优先取“倾斜”定向;随着表面吸附浓度增加,Hxa络合物分子存在从“平面”向“垂直”的再定向作用。本文测定了单层吸附浓度、包含的电量和每个分子占据的面积。络合物吸附得到S形等温线,它与Frumkin吸附等温线接近。本文还列出有关吸附参数B、a、△G_A~O和θ~*的计算结果。     

一类泛函微分方程周期解的存在性与应用

本文给出了一类滞后型泛函微分方程有一个周期解的四个充分性定理，其结果明显地优于著名的Ｙｏｓｈｉｚａｗａ周期解定理，最后给出了应用实例。     

First Total Synthesis of 12-Hydroxy-13-methylpodocarpa-9, 11, 13-trien-3-one

12-Hydroxy-13-methylpodocarpa-9, 11, 13-trien-3-one 9 was isolated from the twigs ofCroton salutaris1. Many diterpenes exhibit significant bioactivities, such as antibac-terial and antitumour and 9 has a rare structure. In order to study the relationshipb…     

Standardization and certification in the area of environmentally degradable plastics

Environmentally degradable polymers and plastics (EDPs) are a group of polymeric materials experiencing a rapid growth in number as well as in their applications and quantities used. The assessment of their key characteristic - degradability, including eventually biodegradability as the ultimate stage, is scientifically and technically a challenging issue and has led to differing interpretations in the past. In order to standardize techniques and criteria a number of standards were established by different standardization bodies which are also used as a basis for certification schemes. An up-to-date inventory of the rapidly growing standardization body is presented with basic interpretation to help guide the non-expert. A basic introduction to EDPs and polymer degradation is added for clarity.     

A MEMS-Based Piezoelectric Power Generator for Low Frequency Vibration Energy Harvesting

A novel power generator has been achieved to convert vibration to electrical energy via the piezoelectric effect. The generator obtained by micro fabrication process mainly consists of silicon based frame and composite cantilever. The prototype tested at resonant vibration generates 1.15μW of effective power to a 20.4-kΩ resistance load. The potential of this work is to offer miniaturization solutions for power generators, and with the proposed method the ambient ubiquitous vibration can be harvested effectively as endless energy source to form an integrated self-powering system.     

Influence of chemistry and hot rolling conditions on high permeability non-grain oriented silicon steel

This paper discusses the influence of chemical composition on the final electromagnetic properties in higher permeability material. Furthermore, the effect of the hot rolling practice and the end of austenite transformation temperature range on the hot band microstructure is described. The magnetic polarization J₅₀₀₀ better than 1.7 T, using hot rolling conditions 40 mm transfer bar thickness, finish mill entry temperature 1000 °C, and finishing temperature 800–840 °C and after decarburization heat treatment and grain growth treatment, was obtained.     

Investigation on the barrier height and inhomogeneity of nickel silicide Schottky

The apparent Schottky barrier height (SBH) of the nickel silicide Schottky contacts annealed at different temperatures was investigated based on temperature dependence of I-V characteristic. Thermionic emission-diffusion (TED) theory, single Gaussian and double Gaussian models were employed to fit I-V experimental data. It is found the single Gaussian and double Gaussian SB distribution model can give a very good fit to the I-V characteristic of apparent SBH for different annealing temperatures. Also, the apparent SBH and the leakage current increase with annealing temperatures under reverse voltage. In addition, the homogeneity of interfaces for the samples annealed at temperatures of 500 and 600 °C is much better than that of the samples annealed at temperatures of 400, 700, and 800 °C. This may result from the phase transformation of nickel silicide due to the different annealing temperatures and from the low Schottky barrier (SB) patches.