Borate adsorption at Pt(111) in acidic medium

The adsorption/desorption process of borate was studied at Pt(111) in acidic solution by cyclic voltammetry. A so-called butterfly wave in the cyclic voltammogram of Pt(111) in HClO₄ shifted to negative direction upon the addition of boric acid with the disappearance of its sharp spikes. The shift in potential was found to be −57 mV with a tenfold increase of boric acid concentration. This illustrates that this anomalous wave is due to borate adsorption/desorption by a one-electron transfer process. The borate adsorption/desorption wave was observed to shift by −63 mV/pH. At pH>3, the anomalous wave splits forming two separate waves, depending on the pH and the scan rate. The appearance of two waves is assigned to the change in the adsorption mode of borate or the participation of OH in the adsorption process.     

Coordination of solvent molecules to VO(acac)<Subscript>2</Subscript> complexes in solution studied by hyperfine sublevel correlation spectroscopy and pulsed electron nuclear double resonance

Interactions and binding sites of the solvent molecules chloroform and ethanol to bis(acetylacetonate)oxovanadium(IV) (VO(acac)₂) complexes in (frozen) solutions have been investigated by pulsed electron nuclear double resonance, sum peak electron spin echo envelope modulation and hyperfine sublevel correlation spectroscopy. The experimental proton hyperfine coupling data of coordinating solvent molecules have been interpreted using quantum chemical calculations (density functional theory). Experimental and computed hyperfine couplings indicate that ethanol coordinates to vanadium in the equatorial plane of VO(acac)₂ and chloroform interacts via hydrogen bonding to oxygens of the acac ligands.     

Determination of trace elements in the Lavender inflorescence (Lavandula angustifolia Mill.) — Lavender oil system

Bulgaria is a famous world producer of essential oils. Quality control of the lavender oils produced is an important analytical task in view of their wide use in perfumery and cosmetics, the food industry and aromatherapy. The present paper studies the relationship between the trace elements content in lavender inflorescence (Lavandula angustifolia Mill.) and in lavender oil derived from this inflorescence. Three model regions were investigated: two of them are situated far from industrial areas — the village of Zelenikovo and the town of Pavel Banya, and one region is located near the Plovdiv Non-Ferrous Metallurgical Plant. The content of the elements Cd, Cr, Cu, Fe, Mn and Pb in plants was determined after acid digestion by flame and electrothermal atomic absorption spectrometry (ETAAS). Lavender oils were analyzed directly by ETAAS. The results undoubtedly show that there is no strong correlation between the trace elements content in inflorescence and in essential oils. It might be assumed that the trace elements present and accumulated in the inflorescence do not pass in lavender oil during the production by steam distillation.     

The molecular geometries of some cyclic nitramines in the gas phase

The structural parameters of 1,3,5-trinitro-1,3,5-triazacyclohexane (RDX), (CH₂NNO₂)₃, 1,3-dinitro-1,3-diazacyclopentane (DDCP), CH₂(CH₂NNO₂)₂, andN-nitropyrrolidine (NP), (CH₂)₄NNO₂, have been determined by electron diffraction.The six-membered ring of RDX has a chair form with axial positions of the nitro groups and close to planar bond geometry of the amine nitrogen atoms. The overallC ₃ symmetry of the molecule is in agreement with the experimental data.The conformation of the five-membered ring in DDCP is a half-chair ofC ₂ symmetry, while that in NP is an envelope ofC _S symmetry. The nitro groups are in equatorial positions in both molecules. The conformations of pyrrolidine and imidazolidine cycles show interesting features.The pyramidal geometry of the amine nitrogen atom bonds flattens in going from pyrrolidine andN-chloropyrrolidine to NP and DDCP and then to RDX and to dimethylnitramine (DMNA), (CH₃)₂NNO₂.     

Application of pressurized sample preparation methods for the analysis of steels and copper alloys

Pressurized sample preparation devices (High Pressure Asher, Pressurized Microwave Digestion system, compared with a PTFE decomposition vessel) were used to dissolve certified metal alloy samples (steel, copper) for ICP analysis. Based on the results of the analysis it was established that both up-to-date devices can be advantageously applied to quickly and quantitatively dissolve metal alloy samples. To dissolve the samples, two different kinds of acid mixtures (A: nitric and hydrochloric acid; B: nitric and hydrochloric and sulphuric and phosphoric acid) were used. The sample preparation is simpler and less time-consuming than the earlier commonly used methods, sample loss and degree of contamination are also reduced. Steel samples containing tungsten, titanium and niobium (less than 0.5%) can only be analyzed using a mixture of the four acids. By dissolving steel samples in the nitric and hydrochloric acid mixture, the concentration of their most common elements (Cr, Ni, Mn, V, Cu) as well as their S and P content can be determined. Copper alloy samples can be dissolved quickly by the pressurized microwave decomposition device using hydrochloric acid and diluted (1:1) nitric acid.     

Oxorhenium(V) dithiolates catalyze the oxidation by tert-butyl hydroperoxide of sulfoxides and sulfides, including 4,6-dimethyldibenzothiophene

tert-Butyl hydroperoxide (TBHP) efficiently converts a wide variety of sulfides to sulfoxides and sulfones. The method offers the advantage that one product or the other can be obtained in high purity by a modest variation of conditions. The reactions occur smoothly at 25minus sign50 C in chloroform and, to the extent studied, in toluene and methylene chloride. A catalyst is required; the most extensively studied was MeReO(mtp)PPh(3), 1, where mtpH(2) is 2-(mercaptomethyl)thiophenol. Other chelating dithiolate ligands can be used with comparable results. These oxidations were tested for dialkyl, alkylminus signaryl, and diaryl sulfides; thiophenes; and thianthrene. Even the "hard" sulfide, 4,6-dimethyldibenzothiophene (DMDBT) was quantitatively oxidized to the dioxide with TBHP:DMDBT 3.0-3.5 and 0.05-3.8 mol % 1. The mechanism was explored in kinetics studies carried out only for methyl tolyl sulfide. The product buildup curve was complex, with an induction period followed by a rapid growth phase. The kinetic data could be modeled adequately but not perfectly by allowing five rate constants to refine. Their values are consistent with the chemical sense of the mechanism.     

Certain graphs with exactly one irreducible T-module with endpoint 1, which is thin

Journal of Algebraic Combinatorics - Let $$\Gamma $$ denote a finite, simple and connected graph. Fix a vertex x of $$\Gamma $$ and let $$T=T(x)$$ denote the Terwilliger algebra of $$\Gamma $$ with...     

Polarographische Bestimmung des Pyridoxols in pharmazeutischen Präparaten

Zusammenfassung Es wird eine neue polarographische Methode zur direkten Bestimmung des Pyridoxols in Injektionspräparaten und Tabletten beschrieben. Die ausgearbeitete Methode beruht auf der polarographischen Reduktion des Pyridoxolmoleküls im Milieu von Ammoniak-Ammoniumchlorid-Puffern und weiter auf der Bildung einer katalytischen Stufe des Pyridoxols in Veronalpuffern. Die polarographische Methode ist rascher und in manchen Fällen genauer und empfindlicher als die bisher in Gebrauch stehenden Methoden. Die Anwesenheit der in den Präparaten laufend vorkommenden Begleitstoffe des Pyridoxols stört nicht die polarographische Bestimmung. Die Methode kann auch zur Bestimmung des 3-Hydroxy-4-methoxymethyl-5-oxymethyl-2-methylpyridins benutzt werden, das ein Zwischenprodukt bei der Pyridoxolerzeugung ist.

---

Summary A new polarographic method is described for the direct determination of pyridoxol in injection preparations and tablets. This method is based on the polarographic reduction of the pyridoxol in ammonia-ammonium chloride buffer medium and also on the formation of a catalytic stage of the pyridoxol in veronal buffers. The polarographic method is faster and in many cases more accurate and more sensitive than the methods now in use. The presence of the materials which always accompany the pyridoxol in the preparations does not interfere with the polarographic determination. The method can likewise be used for determining 3-hydroxy-4-methoxymethyl-5-oxymethyl-2-methylpyridine, which is an intermediate product in the manufacture of pyridoxol.

---

Résumé On décrit une nouvelle méthode polarographique pour le dosage direct du pyridoxol dans les préparations pour injections et dans les comprimés. La méthode élaborée repose sur la réduction polarographique de la molécule de pyridoxol dans le milieu tampon ammoniaque-chlorure d'ammonium, et, en outre, sur la formation d'une phase catalytique du pyridoxol dans les tampons au véronal. La méthode polarographique est plus rapide et dans de nombreux cas plus exacte et plus sensible que les méthodes utilisées jusqu'ici. La présence d'impuretés existant couramment dans les préparations à côté du pyridoxol ne gêne pas le dosage polarographique. On peut aussi utiliser la méthode pour le dosage de l'hydroxy-3 méthoxyméthyl-4 oxyméthyl-5 méthyl-2 pyridine, substance intermédiaire dans la préparation du pyridoxol.

---

---

Herrn Dr.P. Zuman danken wit für Ratsehläge bei der Abfassung dieser Arbeit.     

Generalized Sidon sets of perfect powers

The Ramanujan Journal - For $$h \ge 2$$ and an infinite set of positive integers A, let $$R_{A,h}(n)$$ denote the number of representations of the positive integer n as the sum of h distinct terms...     

Bounds for the generalized Marcum function of the second kind

The Ramanujan Journal - This paper provides elementary proofs for several types of congruences involving multipartitions and self-convolutions of the divisor function. Our computations use...