Design of polyglycidol-containing microspheres for biomedical applications

The paper presents a short review on the synthesis, characterisation and selected medical applications of poly(styrene/α-tert-butoxy-ω-vinylbenzyl-polyglycidol) (P(S/PGL)) microspheres. The soap-free emulsion-polymerisation of styrene and α-tert-butoxy-ω-vinylbenzyl-polyglycidol macromonomer (PGL) in water yielded core-shell microspheres with a low particle-diameter dispersity (ratio of the weight average particle diameter and the number average particle diameter). The interfacial fraction of PGL units, estimated by XPS, was in the range of 0–42 mole % depending on the concentration of the macromonomer in the polymerisation feed. The studies of adsorption of model proteins showed that the surface fraction of adsorbed protein was significantly reduced when the PGL interfacial fraction was higher than 40 mole %. The P(S/PGL) particles with covalently immobilised proteins were used for the preparation of photonic crystal assemblies suitable for applications in optical biosensors and the medical diagnostic test for the detection of Helicobacter pylori antibodies in the blood serum.     

Tailored modification of quartz surfaces by covalent immobilization of small molecules (γ-aminopropyltriethoxysilane), monodisperse macromolecules (dendrimers), and poly(styrene/acrolein/divinylbenzene) microspheres with narrow diameter distribution

Quartz plates were modified by consecutive immobilization of γ-aminopropyltriethoxysilane (APTS), phosphorus containing dendrimers with aldehyde groups (generation 5 – G5), Starburst PAMAM dendrimers generation 4 (G4-PAMAM), and poly(styrene/acrolein/divinylbenzene) microspheres [P(SAD)]. In this way surfaces with heterogeneity on molecular, macromolecular, and microscopic levels, and which were equipped with functional amino or aldehyde groups were obtained. Surface layers were characterized by X-ray photoelectron spectroscopy (XPS) and by contact-angle measurements. Analysis of XPS spectra revealed that the thickness of the layer of G5 on the SiO₂-APTS substrate was 3.7 nm, i.e., the thickness was typical for macromolecular dimensions. The average thickness of the layer of PAMAM dendrimers on SiO₂-APTS-G5 was found to be 0.35 and 0.29 nm, depending on whether calculations were based on attenuation of the intensity of the Si2p or the P2p signal respectively. This thickness was unreasonably low for a monolayer of PAMAM dendrimers and indicated that the surface of the SiO₂-APTS-G5 substrate was incompletely covered with these macromolecules. The XPS method was also used for the determination of the degree of coverage of the surface of a SiO₂-APTS-G5-PAMAM plate with P(SAD) microspheres. The degree of coverage was found to be 0.60 and approaches the maximum theoretically possible value (0.62) for microspheres attached chaotically and irreversibly to the surface in an arrangement one microsphere thick. Subsequent coverage of the SiO₂-APTS-G5-PAMAM-P(SAD) substrate with PAMAM dendrimers resulted in the formation of a PAMAM adlayer 3.2 nm thick, close to the molecular dimensions of these dendrimers. Contact-angle measurements revealed considerable differences in the hydrophobicity of the surfaces of the quartz plates, depending on their modification. Hydrophobicity increased in the order SiO₂ < SiO₂-APTS-G5-PAMAM < SiO₂-APTS ≤ SiO₂-APTS-G5 < SiO₂-APTS-G5-PAMAM-P(SAD). Received: 17 March 1998 Accepted: 14 September 1998     

Polymer Nano- and Microparticle Based Systems for Medical Diagnostics

Summary: Synthesis, properties and medical diagnostic applications of hydrophilic nano- and microspheres with carboxyl, aldehyde and hydroxyl groups on their surface are described. The particles were obtained by emulsion copolymerization of styrene, acrolein, methyl methacrylate, methacrylic acid, and 2-hydroxyethyl methacrylate carried on in water media and initiated with potassium persulfate. Stabilization of particles' suspensions was provided by addition of sodium dodecyl sulfate to polymerizing mixture or by formation of surfactants in situ in copolymerization involving acrolein or α-tert-butoxy-ω-vinylbenzyl-polyglycidol macromonomer (PGL). Relations between interfacial properties of these particles and their ability for covalent immobilization of proteins, with eliminated or at least reduced nonspecific adsorption of these species were investigated. The particles with covalently attached proteins (antigens or antibodies) were used for preparation of diagnostic tests based on visual or turbidimetric observation of particles' aggregation or by monitoring changes in their electrophoretic mobility accompanying specific antigen (or antibody) binding. The later test was directed toward determination of antibodies against Helicobacter pylori. Principle of a new type of diagnostic test based on photonic crystals of microspheres are described.     

Attachment of horseradish peroxidase (HRP) onto the poly(styrene/acrolein) latexes and onto their derivatives with amino groups on the surface; activity of immobilized enzyme

The polystyrene (P(S)), poly(styrene/acrolein) (P(SA)), and polyacrolein (P(A)) latexes, with varied fraction of polyacrolein in the surface layer (f _A=0, 0.50, 0.63, 0.84, 1.00), were used for the attachment of horseradish peroxidase. Surfaces of latexes were modified by reaction with ethylenediamine. In this step the aldehyde groups from polyacrolein were blocked and the primary amino groups were introduced. The carbohydrate portion of HRP was oxidized in the reaction leading to formation of aldehyde groups. The adsorption and covalent immobilization of HRP onto the P(S), P(SA), and P(A) latexes and of the oxidized HRP (HRP-OX) onto the modified latex particles, with amino groups on the surface (P(SA)-M and P(A)-M), were investigated. The activities of parent and oxidized HRP were compared with activities of the corresponding enzymes in solution. It has been found that whereas HRP is not suitable for the covalent immobilization on P(SA) latex and loses its activity after adsorption onto P(S) latex, HRP-OX can be adsorbed onto P(S) latex and is readily immobilized covalently onto the ethylenediamine modified P(SA) and P(A) latexes, retaining much of its former enzymatic reactivity.This work was supported by the KBN Grant 2 0624 91 01     

X-ray photoelectron spectroscopy as a tool for studies of the surface layer of microspheres. The case of polystyrene and poly(styrene–acrolein) microspheres with attached human serum albumin

The application of X-ray photoelectron spectroscopy (XPS) for studies of surface layers of objects with spherical shape was investigated using as examples polystyrene and poly(styrene–acrolein) microspheres with attached human serum albumin (HSA). The amounts of immobilized protein were determined by the standard biochemical Lowry method and by XPS, using the intensity of the N1s signals of HSA as a basis for evaluation. The XPS data were treated by taking into account the spherical shape of the particles analyzed (variable take-off angle of ejected electrons). The best agreement between the results of the biochemical and XPS determinations was found assuming that for the average particle the takeoff angle varies from 0° to 72.7°. This reflects the fact that in the multilayer arrangement of particles, placed onto the support of the XPS apparatus, the particles from the upper layer partially screen the edges of the particles in the layer below. Received: 23 November 1999 Accepted: 16 March 2000     

Biodegradable Polyesters for Tissue Engineering

Summary: Paper describes basic characteristics of synthesis and properties of aliphatic polyesters used for tissue engineering. Described is also synthesis of polyester containing block copolymers suitable for surface modification. Described are methods used for scaffold fabrication with required porosity. In particular, presented are methods according to which scaffolds are made from prefabricated polyester micro- and nanoparticles.     

Surface morphology of polypyrrole core/polyacrolein shell latex by atomic force microscopy (AFM)

 Polypyrrole latex (P(P)), synthesized in Redox polymerization of pyrrole, was used as seed for radical polymerization of acrolein initiated with K₂S₂O₈. In this process the polypyrrole core/polyacrolein shell latex (P(P–A)) was obtained. Morphology of the surface of P(P–A) particles was investigated by atomic force microscopy (AFM). It was found that macromolecules of polyacrolein are not randomly distributed on the surface of polypyrrole but form patches. Apparently, attraction between macromolecules of poly-acrolein in the surface layer is high and the enthalpy of formation of polyacrolein macromolecule clusters is sufficient to compensate, at least, the negative entropy change due to ordering of these macromolecules. Thickness of the polyacrolein layer on the surface of polypyrrole particles, which were covered only partially with polyacrolein, was equal to only 1.6 nm (standard deviation σ= 0.2 nm) and thus, it was reasonable to assume that it corresponded to the monolayer coverage. Received: 30 April 1997 Accepted: 25 August 1997     

Block and random copolymers as surfactants for dispersion polymerization. I. Synthesis via atom transfer radical polymerization and ring‐opening polymerization

Atom transfer radical polymerization (ATRP) and ring‐opening polymerization (ROP) were combined to synthesize poly(?‐caprolactone‐co‐octadecyl methacrylate‐co‐dimethylaminoethyl methacrylate) copolymers possessing a triblock or random block structure. Various synthetic pathways (sequential or simultaneous approaches) were investigated for the synthesis of both copolymers. For the preparation of these copolymers, an initiator with dual functionality for ATRP/anionic ring‐opening polymerization, 2‐hydroxyethyl 2‐bromoisobutyrate, was used. Copolymers were prepared with good structural control and low polydispersities (weight‐average molecular weight/number‐average molecular weight < 1.2), but one limitation was identified: the dimethylaminoethyl methacrylate (DMAEMA) block had to be synthesized after the ?‐caprolactone block. ROP could not proceed in the presence of DMAEMA because the complexation of the amine groups in poly(dimethylaminoethyl methacrylate) deactivated tin(II) hexanoate, which was used as a catalyst for ROP. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1498–1510, 2005     

Preparation and optical properties of novel bioactive photonic crystals obtained from core-shell poly(styrene/α-<Emphasis Type="Italic">tert</Emphasis>-butoxy-ω-vinylbenzyl-polyglycidol) microspheres

Optical properties of polymer microspheres with polystyrene cores and polyglycidol-enriched shells poly(styrene/α-tert-butoxy-ω-vinylbenzyl-polyglycidol) (P(S/PGL) particles with number average diameters D _n determined by scanning electron microscopy equal 237 and 271 nm), were studied before and after immobilization of ovalbumin. The particles were synthesized by emulsifier-free emulsion copolymerization of styrene and polyglycidol macromonomer (poly(styrene/α-tert-butoxy-ω-vinylbenzyl-polyglycidol)) initiated with potassium persulfate. Molar fraction of polyglycidol units in the interfacial layer of the microspheres determined by XPS was equal 42.6 and 34.0%, for the particles with D _n equal 137 and 271 nm, respectively. Colloidal crystals from the aforementioned particles were prepared by deposition of particle suspensions on the glass slides and subsequent evaporation of water. It was found that optical properties of colloidal crystals from the P(S/PGL) microspheres strongly depend on modification of their interfacial layer by covalent immobilization of ovalbumin. The coating of particles with ovalbumin resulted in decreasing their refractive index from 1.58 to 1.52.