An investigation of the quantum chemical description of the ethylenic double bond in reactions: II. Insertion of ethylene into a titanium–carbon bond

Insertion of ethylene into the Ti–methyl bond in TiH₂CH⁺₃ is chosen as a model reaction for investigating the performance of a range of contemporary quantum chemical models in polymerization studies. Basis set effects are investigated at the self-consistent-field level, covering Hartree–Fock, pure DFT, and hybrid DFT. In agreement with findings in part I of this study, the basis set sensitivity of ethylene is shown to introduce a bias in computed energetics, amounting to 2–3 kcal/mol when DZP bases are used to compute the overall heat of monomer insertion. The geometry of stationary points relevant to the insertion reaction is determined using hybrid density functional theory. Based on these structures, the energy profile of the insertion reaction is computed using a range of popular quantum chemical approximations. The methods include Hartree–Fock and Møller–Plesset (MP) perturbation theory up through the fourth order in spin-restricted, spin-unrestricted, and spin-projected formalisms. Furthermore, configuration-interaction-based methods are included, of which the top level method is singly and doubly excited coupled clusters with a perturbative estimate of the contribution from triply excited configurations added [CCSD(T)]. The performance of the methods just mentioned, as well as three pure density functional and three hybrid density functional methods, are compared with respect to “best” relative energies, defined through extrapolation of CCSD(T) correlation energies according to the PCI scheme of Siegbahn and coworkers. Even though the MP series show poor convergence, spin-projected MP2, as well as two pure DFT methods (BPW91, BP86) and PCI-78 based on the MCPF method, show similar and very good agreement with best relative energies for the insertion reaction. © 1998 John Wiley & Sons, Inc. J Comput Chem 19: 947–960, 1998     

Test‐Strip‐Based Fluorometric Detection of Fluoride in Aqueous Media with a BODIPY‐Linked Hydrogen‐Bonding Receptor

The measurement of biologically relevant anions, such as fluoride, is an important task in analytical chemistry, in particular, for dental health and osteoporosis. Although a large number of fluoride probes are known, the applicability under relevant conditions is limited to a few examples. To improve this situation, BODIPY‐amidothiourea dyes with varying hydrogen‐bond donating strengths were developed, the most H‐acidic of which ( 1 c ) could detect F^? from an inorganic source (NaF) in 50 % aqueous solution (DMSO/water 1:1, v/v) with 0.01 ppm sensitivity through selective fluorescence quenching by a photoinduced electron‐transfer (PET) process. Use of the probe and a reference dye with a test‐strip assay and a portable and rapidly recording lateral‐flow fluorescence reader made determination of F^? in neat aqueous solutions, such as spiked water samples and toothpaste extracts, possible in a self‐referenced manner, achieving a detection limit of 0.2 ppm.     

Quantitative determination of the glycosaminoglycan Delta-disaccharide composition of serum, platelets and granulocytes by reversed-phase high-performance liquid chromatography

Seven Delta-disaccharide standards from heparan sulfate/heparin (HS/H) and nine Delta-disaccharide standards from chondroitin/dermatan sulfate (CS/DS) and hyaluronic acid (HA) were derivatized with the fluorophore 2-aminoacridone (AMAC) and separated in two runs each by reversed-phase HPLC with baseline separation and very short run times. This novel method facilitates the separation of the largest number of Delta-disaccharides from both CS/DS/HA and HS/H with one column and buffer system after fluorophore labeling in two runs at present. For the first time nine glycosaminoglycan (GAG) Delta-disaccharides from CS/DS/HA were separated after fluorophore labeling in one run. The limits of quantification (LOQs) were below 0.2 pmol for CS/DS/HA and HS/H Delta-disaccharides. We demonstrated applicability of our method for biological samples. Furthermore, normal ranges of the GAG Delta-disaccharide compositions from platelets and granulocytes were determined for the first time.     

Gas phase vibrational spectroscopy of mass-selected vanadium oxide anions

The vibrational spectra of vanadium oxide anions ranging from V(2)O(6)(-) to V(8)O(20)(-) are studied in the region from 555 to 1670 cm(-1) by infrared multiple photon photodissociation (IRMPD) spectroscopy. The cluster structures are assigned and structural trends identified by comparison of the experimental IRMPD spectra with simulated linear IR absorption spectra derived from density functional calculations, aided by energy calculations at higher levels of theory. Overall, the IR absorption of the V(m)O(n)(-) clusters can be grouped in three spectral regions. The transitions of (i) superoxo, (ii) vanadyl and (iii) V-O-V and V-O single bond modes are found at approximately 1100 cm(-1), 1020 to 870 cm(-1), and 950 to 580 cm(-1), respectively. A structural transition from open structures, including at least one vanadium atom forming two vanadyl bonds, to caged structures, with only one vanadyl bond per vanadium atom, is observed in-between tri- and tetravanadium oxide anions. Both the closed shell (V(2)O(5))(2,3)VO(3)(-) and open shell (V(2)O(5))(2-4)(-) anions prefer cage-like structures. The (V(2)O(5))(3,4)(-) anions have symmetry-broken minimum energy structures (C(s)) connected by low-energy transition structures of C(2v) symmetry. These double well potentials for V-O-V modes lead to IR transitions substantially red-shifted from their harmonic values. For the oxygen rich clusters, the IRMPD spectra prove the presence of a superoxo group in V(2)O(7)(-), but the absence of the expected peroxo group in V(4)O(11)(-). For V(4)O(11)(-), use of a genetic algorithm was necessary for finding a non-intuitive energy minimum structure with sufficient agreement between experiment and theory.     

Alternative organic solvents for HILIC separation of cisplatin species with on-line ICP-MS detection

Several low volatile organic solvents were evaluated as organic modifiers in eluents for HILIC separations of cisplatin species to optimize the on-line coupling of HILIC to inductively coupled plasma MS (ICP-MS). The aim was to identify a solvent giving low solvent vapor loading of the ICP, to maximize analyte sensitivity and minimize carbon depositions on instrumental parts, while retaining chromatographic performance. The best overall performance of the HILIC-ICP-MS system for the analysis of cisplatin was achieved using 1,4-dioxane as eluent, yielding high retention and an HILIC type retention mechanism, at the expense of a 50% drop in column efficiency due to the higher viscosity of 1,4-dioxane compared to the more commonly used HILIC solvent ACN. Using 1,4-dioxane as solvent in HILIC provides the best compromise between carbon deposition and separation efficiency among a series of high-boiling water-miscible solvents tested.     

13C assignments of the carbon atoms in the aromatic rings of lignin model compounds of the arylglycerol beta-aryl ether type

The 13C NMR signals from the aromatic ring carbons in a series of lignin model compounds of the arylglycerol beta-aryl ether type in DMSO solution have been assigned. The model compounds investigated are representative of the erythro and threo forms of differently substituted arylglycerol beta-aryl ethers.     

Sample cleanup-free determination of mycophenolic acid and its glucuronide in serum and plasma using the novel technology of ultra-performance liquid chromatography-electrospray ionization tandem mass spectrometry

Mycophenolic acid (MPA) is an immunosuppressant drug which powerfully inhibits lymphocyte proliferation. Since the early 1990s it has been used to prevent rejection in organ transplantation. The requirement of therapeutic drug monitoring shown in previous studies raises the necessity of acquiring accurate and sensitive methods to measure MPA and its major metabolite mycophenolic acid glucuronide (MPAG).The authors developed a sample cleanup-free, rapid, and highly specific method for simultaneous measurement of MPA and MPAG in human plasma and serum using the novel technology of ultra-performance liquid chromatography-electrospray ionization tandem mass spectrometry. MPA- and MPAG-determinations were performed during a 2.0-min run time. Multiple calibration curves for the analysis of MPA and MPAG exhibited consistent linearity and reproducibility in the range of 0.05-100 (r > 0.999) mg L⁻¹ and 4-4000 mg L⁻¹ (r > 0.999), respectively. Limits of Detection were 0.014 mg L⁻¹ for MPA and 1.85 mg L⁻¹ for MPAG. Lower Limits of Quantification were 0.05 mg L⁻¹ for MPA and 2.30 mg L⁻¹ for MPAG. Interassay imprecision was <10% for both substances. Mean recovery was 103.6% (range 78.1-129.7%) for MPA and 111.1% (range 73.0-139.6%) for MPAG. Agreement was good for MPA and MPAG between the presented method and a validated HPLC-MS/MS method. The Passing-Bablok regression line for MPA and MPAG was HPLC-MS/MS = 1.14 UPLC-MS/MS—0.14 [mg L⁻¹], r = 0.96, and HPLC-MS/MS = 0.77 UPLC-MS/MS + 0.50 [mg L⁻¹], r = 0.97, respectively. This sample cleanup-free and robust LC-MS/MS assay facilitates the rapid, accurate and simultaneous determination of MPA and MPAG in human body fluids.     

Nanoscopic optical sensors based on functional supramolecular hybrid materials

This review highlights how the combination of supramolecular principles and nanoscopic solid structures enables the design of new hybrid sensing ensembles with improved sensitivity and/or selectivity and for the targeting of analytes for which selectivity is hard to achieve by conventional methods. Such ideas are bridging the gap between molecules, materials sciences and nanotechnology. Relevant examples will be detailed, taking into account functional aspects such as (1) enhanced coordination of functionalized solids, (2) enhanced signalling through preorganization, (3) signalling by assembly–disassembly of nanoscopic objects, (4) biomimetic probes utilizing discrimination by polarity and size and (5) distinct switching and gating protocols. These strategies are opening new prospects for sensor research and signalling paradigms at the frontier between nanotechnology, smart materials and supramolecular chemistry.     

On the origins of core-electron chemical shifts of small biomolecules in aqueous solution: insights from photoemission and ab initio calculations of glycine(aq)

The local electronic structure of glycine in neutral, basic, and acidic aqueous solution is studied experimentally by X-ray photoelectron spectroscopy and theoretically by molecular dynamics simulations accompanied by first-principle electronic structure and spectrum calculations. Measured and computed nitrogen and carbon 1s binding energies are assigned to different local atomic environments, which are shown to be sensitive to the protonation/deprotonation of the amino and carboxyl functional groups at different pH values. We report the first accurate computation of core-level chemical shifts of an aqueous solute in various protonation states and explicitly show how the distributions of photoelectron binding energies (core-level peak widths) are related to the details of the hydrogen bond configurations, i.e. the geometries of the water solvation shell and the associated electronic screening. The comparison between the experiments and calculations further enables the separation of protonation-induced (covalent) and solvent-induced (electrostatic) screening contributions to the chemical shifts in the aqueous phase. The present core-level line shape analysis facilitates an accurate interpretation of photoelectron spectra from larger biomolecular solutes than glycine.     

A novel ultra-sensitive method for the quantification of glycosaminoglycan disaccharides using an automated DNA sequencer

Analysis of glycosaminoglycans (GAGs) is of increasing importance concerning alterations in extracellular matrix composition and selectivity of glomerular basement membrane. In this report we describe the analysis of chondroitin sulfate disaccharides as an example of GAG delta disaccharide analysis using standard DNA sequencing equipment (DNA sequencer-assisted GAG disaccharide separation, DSA-GAGS). The presented methodology allows nanomolar quantification of 8-aminopyrene-1,3,6-trisulfonic acid (APTS)-derived GAG disaccharides. In comparison to RP-HPLC the established method is much more sensitive, showing detection limits of 38 fmol/microL. Variation coefficients were approximately 10%, enabling exact quantifications after run times of 17 min at 30 degrees C and an electrophoresis voltage of 15 kV; using a capillary DNA sequencer, available in many molecular laboratories, presented advantages like automated sample injection, opportunity of high-throughput analyses, separation of even sulfated disaccharide epimers, and the possibility of using APTS-derived fucose as an internal standard. Furthermore, highly reproducible retention times rendered easy identification of specific signals (SD 0.02). With regard to these results, the described method is a useful tool for the quantification of GAG disaccharides in low amounts, indicating advantages of obverse RP-HPLC and slab gel polyacrylamide electrophoresis in sensitivity, error-proneness, automation, and handling.