A class of completek-caps inPG(3,q) forq an odd prime

The main problem on caps, posed originally by Segre in the fifties, is to determine the values of k for which there exists a complete k-cap. Very few results on this problem are known. The cardinality of the largest cap(s) and the smallest complete cap(s) are crucial. In this paper it is shown that there exist complete k-caps in PG(3, q), q an odd prime 5 or q = 9, such that k = (q² + q + 6)/3 or k = (q² + 2q + 6)/3. These complete caps are smaller than those currently known for q odd.In memoriam Giuseppe Tallini     

Photochemical structuring and fixing of structures in binary polymer brush layers via 2pi+2pi photodimerization

Binary polymer brushes grafted to Si wafers were prepared from hydrophilic and hydrophobic polymer components, which allow switching the surface properties (as revealed by contact angles) by exposure to varying solvents. The hydrophilic component was poly-2-vinylpyridine; the hydrophobic component was a copolymer of styrene and 2-(4-vinylphenyl)indene containing the photodimerizable phenylindene chromophore. The brushes were prepared via thermal and via photochemical grafting-to methods, which led to distinct layer thicknesses. Structural patterns differing in surface properties were produced and fixed via crosslinking the hydrophobic component by 2pi+2pi photodimerization of phenylindene moieties. The patterns were visually observable.     

Coupling and cycloaddition of ynamides: homo- and Negishi coupling of tosylynamides and intramolecular [4+2] cycloaddition of N-(o-ethynyl)phenyl ynamides and arylynamides

N,N′-aryl- and N,N′-alkyl-buta-1,3-diyne-1,4-ditosylamides have been synthesized for the first time, in good to excellent yields, by copper-catalyzed dimerization of the corresponding N-aryl or N-alkyl tosylynamides. Negishi coupling of N-ethynylzinc tosylamides derivatives with (hetero)aryl iodides in the presence of Pd₂dba₃ and triphenylphosphine affords N-aryl and N-alkyl arylynamides in yields of up to 90%. Intramolecular [4+2] cycloaddition reactions of N-ethynylphenyl ynamides and arylynamides allow the synthesis of carbazoles and benzannulated and heteroannulated carbazoles in moderate-to-good yields.     

Transmembrane anion transport mediated by halogen bonding and hydrogen bonding triazole anionophores

Transmembrane ion transport by synthetic anionophores is typically achieved using polar hydrogen bonding anion receptors. Here we show that readily accessible halogen and hydrogen bonding 1,2,3-triazole derivatives can efficiently mediate anion transport across lipid bilayer membranes with unusual anti-Hofmeister selectivity. Importantly, the results demonstrate that the iodo-triazole systems exhibit the highest reported activity to date for halogen bonding anionophores, and enhanced transport efficiency relative to the hydrogen bonding analogues. In contrast, the analogous fluoro-triazole systems, which are unable to form intermolecular interactions with anions, are inactive. The halogen bonding anionophores also exhibit a remarkable intrinsic chloride over hydroxide selectivity, which is usually observed only in more complex anionophore designs, in contrast to the readily accessible acyclic systems reported here. This highlights the potential of iodo-triazoles as synthetically accessible and versatile motifs for developing more efficient anion transport systems. Computational studies provide further insight into the nature of the anion-triazole intermolecular interactions, examining the origins of the observed transport activity and selectivity of the systems, and revealing the role of enhanced charge delocalisation in the halogen bonding anion complexes.

Halogen and hydrogen bonding 1,2,3-triazole derivatives efficiently mediate anion transport across lipid bilayer membranes with unusual anion selectivity profiles.     

DISTRIBUTION OF PORPHYRINS IN THE VARIOUS COMPARTMENTS OF UNILAMELLAR LIPOSOMES OF DIPALMITOYL-PHOSPHATIDYLCHOLINE AS PROBED BY FLUORESCENCE SPECTROSCOPY

Abstract— The spectroscopic properties of hematoporphyrin, hematoporphyrin-dimethyl ester, uroporphyrin and uroporphyrinoctamethyl ester, incorporated into unilamellar liposomes of dipalmitoylphos-phatidylcholine, have been studied with the aim to assess the distribution of porphyrins within the various liposomal compartments.
The results obtained indicate that the highly hydrosoluble uroporphyrin is partitioned in the endoliposomal aqueous pool while its octamethylester is homogeneously distributed in the inner lipid monolayer. Hematoporphyrin and its dimethylester show an heterogeneous distribution within the phospholipid bilayer. At T = 25°C these porphyrins are preferentially located in the outer phospholipid monolayer.
Detailed studies on hematoporphyrin indicate that the distribution between the inner and outer phospholipid monolayer is a function of temperature and liposome dimensions. In particular, the increase of temperature above the critical temperature for the liquid-gel phase transition of the liposomes causes a partial shift of the porphyrin molecules toward the inner phospholipid monolayer. Moreover, the increase of liposome dimensions leads to a greater accessibility of porphyrin to the external medium.     

Analogy in adsorption behavior of homopolyelectrolyte mixtures as compared to analogous diblock polyampholytes

The adsorption behavior of aqueous mixtures of the homopolyelectrolytes poly(methacrylic acid) (PMAA) and poly[(dimethylamino)ethyl methacrylate] (PDMAEMA) was investigated in comparison with the adsorption of the ampholytic diblock copolymer PMAA‐b‐PDMAEMA on silicon substrates. Ellipsometry was used to determine the amount of adsorbed homopolyelectrolyte and diblock polyampholyte. Furthermore, the topography of the adsorbed polymers was investigated with atomic force microscopy (AFM) and compared with the structures observed in aqueous solutions by dynamic light scattering (DLS). For all types of investigated polyelectrolytic mixtures or the single polyampholyte, the adsorption was strongly influenced by the pH of the polymer solution. Although single homopolyelectrolytes showed only one maximum in adsorption according to their charge, the mixtures made from these homopolyelectrolytes showed two or three maxima. The third maximum near the isoelectric point of the mixture was assigned to a new species formed by aggregation of the two homopolyelectrolytes. Altogether, the adsorption behavior of the polyelectrolytic mixtures was in between the behavior of the pure homopolyelectrolytes and the analogous polyampholytes and therefore understandable from both of these polymer species. © 2002 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 338–345, 2002; DOI 10.1002/polb.10091     

Surface patterns of block copolymers in thin layers after vapor treatment

A systematic study of formation of surface patterns in block copolymer thin layers after their exposure to solvent vapors was performed. The studied effect involves layers of thickness approximately equal to the ordering size of polymers - about 45 nm. Experiments were performed on three styrene - methacrylate derivative block copolymers, synthesized by living anionic polymerization: poly(4-octylstyrene)-block-poly(butyl methacrylate), poly(4-fluorostyrene)-block-poly(butyl methacrylate) and poly(p-octylstyrene)-block-poly(methyl methacrylate). The polymers were exposed to vapors of chloroform, 1,4-dioxane, hexane, acetone and tetrahydrofuran.     

Adsorption and structure formation of the weak polyelectrolytic diblock copolymer,PVP-<Emphasis Type="Italic">b</Emphasis>-PDMAEMA

This paper reports on the pH-dependent adsorption of weak the polyelectrolytic diblock copolymer poly(2-vinylpyridine)-block-poly(dimethylaminoethyl methacrylate), (PVP-b-PDMAEMA). Aqueous PVP-b-PDMAEMA solutions have been adsorbed on alkaline pretreated silicon substrates. Altogether two copolymers differing in block ratio and molecular weight were used for the investigations. While the electrical charge of both samples in solution was investigated by electrophoretic measurements, the adsorbed polymer layers were studied with ellipsometry and atomic force microscopy (AFM). Depending on pH the electrical charge of both blocks of the diblock copolymer varied. Three different regimes have been identified. Under acidic conditions at pH<5, both blocks are mainly positively charged. At medium pH between 5 and 8, only the PDMAEMA block is positively charged. At pH>8, both blocks are nearly uncharged and a polymer precipitation occurred in solution. Each of these pH regimes was characterized by a specific adsorption behaviour leading to two adsorption maxima at acidic and alkaline pH values, while at medium pH a plateau in the adsorbed amount was observed. Moreover, the structures of the polyelectrolytes formed on the substrate after adsorption were specific to each of the three pH regimes.     

Agro-industrial waste enzymes: Perspectives in circular economy

According to the Food and Agriculture Organization of the United Nations, approximately 1.3 billion tons of food is wasted each year, equivalent to approximately one-third of world production. Agri-food wastes are the source of proteins, carbohydrates, lipids, and other essential minerals that have been exploited for value-added products by the development of biorefineries and sustainable business as important elements of circular economies. The innovation and materialization of these types of processes, including the use of disruptive technologies on microbial bioconversion and enzyme technology, such as nanotechnology, metabolic engineering, and multi-omics platforms, increase the perspectives on the waste valorization process. Lignocellulolytic enzymes, pectinases, and proteases are mainly used as catalyzers on agri-food waste treatment, and their production in house might be the trend in near future for agro-industrial countries. Another way to transform the agri-food wastes is via aerobic or anaerobic microbial process from fungal or bacterial cultures; these processes are the key to produce waste enzymes.     

Rationalizing the diverse reactivity of [1.1.1]propellane through σ–π-delocalization

[1.1.1]Propellane is the ubiquitous precursor to bicyclo[1.1.1]pentanes (BCPs), motifs of high value in pharmaceutical and materials research. The classical Lewis representation of this molecule places an inter-bridgehead C–C bond along its central axis; ‘strain relief’-driven cleavage of this bond is commonly thought to enable reactions with nucleophiles, radicals and electrophiles. We propose that this broad reactivity profile instead derives from σ–π-delocalization of electron density in [1.1.1]propellane. Using ab initio and DFT calculations, we show that its reactions with anions and radicals are facilitated by increased delocalization of electron density over the propellane cage during addition, while reactions with cations involve charge transfer that relieves repulsion inside the cage. These results provide a unified framework to rationalize experimental observations of propellane reactivity, opening up opportunities for the exploration of new chemistry of [1.1.1]propellane and related strained systems that are useful building blocks in organic synthesis.

A unified framework that explains the reactivity of [1.1.1]propellane through electron delocalization.