Quaternary ammonium substituted agarose as surface coating for capillary electrophoresis

A novel positively charged polymer of quaternary ammonium substituted agarose (Q-agarose) has been synthesized and explored for use as a coating in capillary electrophoresis. The fast and simple coating procedure is based on a multi-site electrostatic interaction between the polycationic agarose polymer and the negatively charged fused-silica surface. By simply flushing fused-silica capillaries with hot polymer solution a positively charged, hydrophilic deactivation layer is achieved. The polymer surface provides an intermediate electroosmotic flow of reversed direction, over a range of pH 2-11, compared to unmodified fused-silica. The coating procedure was highly reproducible with an RSD of 4%, evaluated as the electroosmotic flow mobility for 30 capillaries prepared at 10 different occasions. The application of Q-agarose coated capillaries in separation science was investigated using a set of basic drugs and model proteins and peptides. Due to the intermediate electroosmotic flow generated, the resolution of basic drugs could be increased, compared to using bare fused-silica capillaries. Moreover, the coating enabled separation of proteins and peptides with efficiencies up to 300.000 plates m(-1).     

Surface properties of hydrous manganite (gamma-MnOOH). A potentiometric, electroacoustic, and X-ray photoelectron spectroscopy study

The acid-base characteristics of the manganite (gamma-MnOOH) surface have been studied at pH above 6, where dissolution is negligible. Synthetic microcrystalline particles of manganite were used in the experiments. From potentiometric titrations, electrophoretic mobility measurements, and X-ray photoelectron spectroscopy (XPS), a one pK(a) model was constructed that describes the observed behavior. The data show no ionic strength effect at pH < 8.2, which is the pH at the isoelectric point (pH(iep)), but ionic strength effects were visible above this pH. To explain these observations, Na(+) ions were suggested to form a surface complex. The following equilibria were established: =MnOH(2)(+1/2) right harpoon over left harpoon =MnOH(-)(1/2) + H(+), log beta(0) (intr.) = -8.20; =MnOH(2)(+1/2) + Na(+) right harpoon over left harpoon =MnOHNa(+1/2) + H(+), log beta(0) (intr.) = -9.64. The excess of Na(+) at the surface was supported by XPS measurements of manganite suspensions containing 10 mM NaCl. The dielectric constant of synthetic manganite powder was also determined in this study.     

Development and application of an analytical protocol for evaluation of treatment processes for landfill leachates. I. Development of an analytical protocol for handling organic compounds in complex leachate samples

A strategy is presented for evaluation of treatment procedures for landfill leachate with emphasis on organic pollutants. An analytical scheme, the LAQUA protocol, was developed as a guide for the analytical work. The protocol includes organic as well as metals, inorganic ions, water-quality parameters, and toxicity. The proposed strategy considers the behaviour of both polar and non-polar organic substances at trace levels. For polar substances, phenols were chosen as markers and determined with an automated supported liquid membrane extraction device, coupled on-line to HPLC with a diode-array detector. For non-polar substances, PCBs and 10 unidentified compounds were chosen as markers and analysed by solid-phase extraction combined with supercritical fluid extraction with GC analysis. The chosen measurement strategy, based on the use of marker substances, difference measurements, and versatile data-handling procedures, provided essential information about complex systems at relatively low cost.     

High-pressure ammonia adsorption and dissociation on clean fe(111) and oxygen-precovered fe(111) studied by sum frequency generation vibrational spectroscopy

The adsorption of gases N2, H2, O2, and NH3 that play a role in ammonia synthesis have been studied on the Fe(111) crystal surface by Sum Frequency Generation (SFG) vibrational spectroscopy using an integrated ultrahigh vacuum/high-pressure system. SFG spectra are presented for the dissociation intermediates, NH2 ( approximately 3325 cm-1) and NH ( approximately 3235 cm-1) under high pressure of ammonia (200 Torr) on the clean Fe(111) surface. Addition of 0.5 Torr of oxygen to 200 Torr of ammonia does not significantly change the bonding of dissociation intermediates to the surface. However, it leads to a phase change of nearly 180 degrees between the resonant and nonresonant second-order nonlinear susceptibility of the surface, demonstrated as a reversal of the SFG spectral features. Heating the surface in the presence of 200 Torr of ammonia and 0.5 Torr of oxygen reduces the oxygen coverage, which can be seen from the SFG spectra as another relative phase change of 180 degrees . The reduction of the oxide is also supported by Auger electron spectroscopy. The result suggests that the phase change of the spectral features could serve as a sensitive indicator of the chemical environment of the adsorbates. Clean Fe(111) is found to have a large SFG nonresonant signal. The magnitude of the nonresonant signal was dependent on the adsorption species; O2 and N2 decrease, while H2 and NH3 increase the SFG nonresonant signal. The change in nonresonant signal is correlated to the change in work function for Fe(111) upon adsorption. Adsorption-induced changes in the SFG nonresonant signal was used as an indicator of surface conditions and to monitor surface reactions.     

Nanoparticle‐based capillary electroseparation of proteins in polymer capillaries under physiological conditions

Totally porous lipid‐based liquid crystalline nanoparticles were used as pseudostationary phase for capillary electroseparation with LIF detection of proteins at physiological conditions using unmodified cyclic olefin copolymer capillaries (Topas^®, 6.7 cm effective length). In the absence of nanoparticles, i.e. in CE mode, the protein samples adsorbed completely to the capillary walls and could not be recovered. In contrast, nanoparticle‐based capillary electroseparation resolved green fluorescent protein from several of its impurities within 1 min. Furthermore, a mixture of native green fluorescent protein and two of its single‐amino‐acid‐substituted variants was separated within 2.5 min with efficiencies of 400 000 plates/m. The nanoparticles prevent adsorption by introducing a large interacting surface and by obstructing the attachment of the protein to the capillary wall. A one‐step procedure based on self‐assembly of lipids was used to prepare the nanoparticles, which benefit from their biocompatibility and suspension stability at high concentrations. An aqueous tricine buffer at pH 7.5 containing lipid‐based nanoparticles (2% w/w) was used as electrolyte, enabling separation at protein friendly conditions. The developed capillary‐based method facilitates future electrochromatography of proteins on polymer‐based microchips under physiological conditions and enables the initial optimization of separation conditions in parallel to the chip development.     

Study of geometry effects in torsional rheometry of fibre suspensions

This work concerns the problem of measuring the viscosity of a suspension of fibres that are not short compared to the dimensions of the measurement device. We have examined various geometry effects in shear using parallel-plate and cone-and-plate configurations. Steady state viscosity, transient viscosity and first normal stress difference have been studied. Silicone oil with milled glass fibres at 8 vol.% was used as a model fibre suspension. The conventional parallel-plate geometry exhibits a significant gap dependence of the apparent viscous response. Too small gaps constrain the fibre rotations, thus lowering the initial stress peak and delaying the development of steady state. Too large gaps lead to a loss of liquid at the sample perimeter, which reduces the apparent steady state viscosity. The steady state response, however, seems to be correct for gaps in the range 1–2 mm when the maximum fibre length is 1.5 mm. The cone-and-plate geometry is less sensitive to large gaps. Too small a gap at the (truncated) cone apex leads to anomalous response due to bridging of the gap by fibres. The use of unusually large plates (100 mm diameter) and different cone angles and truncations was explored. It was shown that cone-and-plate configurations of large diameter and large truncation can effectively decrease the geometry disturbances both due to fibre bridging at the cone apex and loss of liquid at the edge.     

Sliding plate rheometry of planar oriented concentrated fiber suspension

The rheology of concentrated planar fiber suspensions is investigated. A new experimental technique for fiber suspensions based on a sliding plate rheometer incorporating a shear stress transducer is developed. It is shown that this instrument works well for the tested material systems. The rheological behavior in steady shear is subsequently investigated. The results can be largely explained by a combination of frictional and hydrodynamic interaction. Despite this evidence of friction no yield stress could be detected for the investigated shear rates. It was also found that the fiber aspect ratio did not influence the steady shear viscosity.