Langevin description of the charge distribution of fragments originating from the fission of excited nuclei

The charge distribution of fragments originatingfrom the fission of the ²³⁶U compound nucleus is calculated within a stochastic approach based on Langevin equations. The elongation coordinate, the neck-thickness coordinate, and the charge-asymmetry coordinate are chosen as collective variables. The friction parameter of the charge mode is calculated on the basis of two nuclear-viscosity mechanisms, that of one-body and that of two-body dissipation. It is shown that the Langevin approach is applicable to studying isobaric distributions. In addition, the charge distribution in question is studied as a function of the excitation energy of the compound nucleus and as a function of the coefficient of two-body viscosity.     

Adsorption of nonionic surfactant triton X-100 on solids from aqueous and nonaqueous solutions

The adsorption of nonionic surfactant Triton X-100 on quartz sand and methylated quartz sand from water and toluene was investigated by means of spectrophotometry, the radiotracer technique, and wetting angle measurements.     

Structural study and electrical properties of Zr-doped Nd<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript> pyrochlore compounds

Nd₂Sn₂O₇ pyrochlores with the substitution of Zr⁴⁺ were prepared by conventional ceramic double sintering technique. The single-phase formation was confirmed by X-ray diffraction and neutron diffraction techniques. Relative intensity calculations for X-ray diffraction analysis were performed for oxygen positional parametersx = 0.331 and 0.375, while Rietveld refinements were employed for neutron diffraction data. The neutron diffraction study revealed that there are only two anion sites with 48f and 8b positions. This indicates that the 8a site, i.e. O(3) sublattice, is completely vacant and the structure is a perfect cubic pyrochlore with space group Fd3m (O _h ⁷ ). From the conductivity measurements, it is observed that the electronic conductivity dominates from room temperature up to about 525 K and forT > 525 K, the oxygen ion conduction dominates the charge transport in these compositions. Complex impedance spectroscopy indicates the existence of grain and grain boundary as two separate elements.     

First synthesis of magnesacyclopentadienes from acetylenes by treatment with BuMgHlg in the presence of Zr complexes

Treatment of internal acetylenes and allenes with BuMgHlg (Hlg = Cl, Br) in the presence of Cp₂ZrCl₂ selectively leads to the formation of substituted magnesacyclopenta-2,4-dienes and alkylidenemagnesacyclopentenes.     

Heat of adsorption and density distribution in slit pores with defective walls: GCMC simulation studies and comparison with experimental data

The adsorption behavior (capacity, density distribution and packing density) and the isosteric heat versus loading in a slit pore whose walls contain defective graphene layers are investigated in this paper. The defective wall is characterized by the extent and size of the defect. Simulation results obtained with the Grand Canonical Monte Carlo method reveal complex patterns of isosteric heat, and this complex behavior is a result of the interplay between three factors: (i) the surface heterogeneity (solid-fluid interaction, sites with varying degree of affinity), (ii) fluid-fluid interaction and (iii) the overlapping of potentials exerted by the two defective walls. We illustrate this with argon adsorption in pores of various sizes, and results obtained from the simulation agree qualitatively with the experimental data at 77 K on Saran microporous S600H and micro-mesoporous S84 charcoals of Beebe et al. [R.A. Beebe, B. Millard, J. Cynarski, J. Am. Chem. Soc. 75 (1953) 839]. The S600H was found to contain pores predominantly in the neighborhood of 7 Å with 30% of defect and a defective size of 2.84 Å. This is consistent with the argument made by Beebe et al. that this sample is a microporous solid and most pores can accommodate only one layer. The other sample, S84, has larger pores than S600H, and it is found that it has a wider pore size distribution and the pore width is centered at about 12 Å.     

Nanometric Antimony Powder Synthesis by Activated Alkaline Hydride Reduction of Antimony Pentachloride

A novel chemical reduction method using an activated alkaline hydride (LiH or NaH-t-BuONa) in tetrahydrofuran solvent has been applied to antimony salt reduction. X-ray diffraction and transmission electron microscopy studies have been carried out to characterize the morphology and structure of the materials. Alkali hydride nature influence has been proved. In both cases the process allows to prepare antimony particles in nanometer range from few nanometers to about 20nm which could be used as anodic materials for lithium–ion batteries. With lithium hydride well-crystallized particles inclined to agglomeration were observed whereas finely dispersed amorphous particles were pointing out after activated sodium hydride reduction.     

Diffuse x-ray scattering study of the formation of microdefects in heat-treated dislocation-free large-diameter silicon wafers

Diffuse x-ray scattering (DXS) is used to study the formation of microdefects (MDs) in heat-treated dislocation-free large-diameter silicon wafers with vacancies. The DXS method is shown to be efficient for investigating MDs in silicon single crystals. Specific defects, such as impurity clouds, are found to form in the silicon wafers during low-temperature annealing at 450°C. These defects are oxygen-rich regions in the solid solution with diffuse coherent interfaces. In the following stages of decomposition of the supersaturated solid solution, oxide precipitates form inside these regions and the impurity clouds disappear. As a result of the decomposition of the supersaturated solid solution of oxygen, interstitial MDs form in the silicon wafers during multistep heat treatment. These MDs lie in the {110} planes and have nonspherical displacement fields. The volume density and size of MDs forming in the silicon wafers at various stages of the decomposition are determined.     

Spatial amplification of a laser wave and the transverse spread of electrons in an undulator with a noncollinear configuration

The spatial amplification of a wave in a magnetostatic undulator with noncollinear electron and laser beams is studied in the framework of the dispersion relation for single-frequency and collective regimes. The dependence of the gain on the electron beam width is estimated with regard to the spatial boundedness of the beams. The laser power threshold at which the selection with respect to the transverse velocity is possible is obtained for a free-electron laser without inversion.     

Coupled channel description of O+Nd scattering around the Coulomb barrier using a complex microscopic potential

Angular distributions of elastic scattering and inelastic scattering from 2⁺₁ state are measured for ¹⁶O+^142,144,146Nd systems at several energies in the vicinity of the Coulomb barrier. The angular distributions are systematically analyzed in coupled channel framework. Renormalized double folded real optical and coupling potentials with DDM3Y interaction have been used in the calculation. Relevant nuclear densities needed to generate the potentials are derived from shell model wavefunctions. A truncated shell model calculation has been performed and the calculated energy levels are compared with the experimental ones. To simulate the absorption, a ‘hybrid’ approach is adopted. The contribution to the imaginary potential of couplings to the inelastic channels, other than the 2⁺₁ target excitation channel, is calculated in the Feshbach formalism. This calculated imaginary potential along with a short ranged volume Woods–Saxon potential to simulate the absorption in fusion channel reproduces the angular distributions for ¹⁶O+¹⁴⁶Nd quite well. But for ¹⁶O+^142,144Nd systems additional surface absorption is found to be necessary to fit the angular distribution data. The variations of this additional absorption term with incident energy and the mass of the target are explored.