Quantitative structure-property relationship: XXVII. Estimation of the free energy of formation of host-guest complexes of α-cyclodextrin with benzene derivatives

A structure-property relationship was used to estimate the free energy of formation of host-guest complexes of α-cyclodextrin with monosubstituted benzene and phenol derivatives and with symmetrical 1,4-disubstituted benzene derivatives, in which various nonvalent interactions (hydrophobic, van der Waals, donor-acceptor) play a significant role. The calculated values are well consistent with the experiment.     

Optimization of simulated moving bed plants with low efficient stationary phases: separation of fructose and glucose

An optimization procedure for simulated moving bed (SMB) plants with low efficient stationary phases is presented. The new aspect is that the desorbent consumption can be cut by 70% by running the plant with lower internal liquid flows and a corresponding larger switch time while the productivity is kept constant. This concept was validated by the separation of fructose and glucose in water on a calcium resin with an eight-column SMB plant. The separation can be predicted well by a true moving bed (TMB) and a simulated moving bed simulation. Adsorption isotherms were determined up to 300 kg/m3 for glucose and 500 kg/m3 for fructose from 25 to 80 degrees C. Experimental SMB runs were performed over a wide range of feed concentrations (10-350 kg/m3) and temperatures (25-80 degrees C). The strong influence of the delay volume is pointed out. For an experimental run with high feed concentration a complete set of data is presented. To reduce biological growth separation at 80 degrees C is recommended.     

Determination of copper impurities in nickel and cobalt salts by atomic absorption spectroscopy

Summary A method is described for the rapid determination of traces of copper in the ppm range in cobalt and nickel salts. The % standard deviation for the analysis is reported as 3.4 to 3.7 for aequous solutions and 4.8 to 5.0 for carbon tetrachloride sprayed directly into the flame after extraction.

---

Zusammenfassung Ein Verfahren zur raschen Bestimmung von Kupferspuren im ppm-Bereich in Kobalt- und Nickelsalzen wurde beschrieben. Die Standardabweichung in wäßrigen Lösungen beträgt 3,4 bis 3,7%, bei unmittelbarem Versprühen der Tetrachlorkohlenstoffextrakte in die Flamme 4,8 bis 5,0%.

     

EPR study of the mechanism of interaction of NO and NO2 molecules with zeolite surfaces

The adsorption of the paramagnetic molecules of NO and NO₂ by zeolites in the alkali and alkaline earth cationic forms has been studied by EPR and reflectance spectroscopic methods. The change in the EPR spectra of adsorbed nitric oxide with increase in the degree of covering of the surface of the alkali cationic form of the zeolites, and also the nature of the change in the spectra when oxygen is adsorbed on zeolites on which NO has previously been adsorbed, indicate the existence of two types of adsorption center. At low degrees of covering of the surface, on the order of 10¹⁸ g^–1, as can be judged from the EPR spectra, the adsorbed NO molecule is strongly polarized and the unpaired electron is almost completely localized on the oxygen atom. At high degrees of covering, for an appreciable proportion of the NO molecules, the bond with the surface is weaker. In this case, the EPR spectra show a hyperfine structure (HFS) with a constant which changes with change in the cation in the order Li⁺ Na⁺ K⁺. The replacement of the singly charged Na⁺ by the doubly charged Ca²⁺ produces a marked change in the adsorption properties of the zeolite. The adsorption of NO on CaA leads not only to polarization of the adsorbed molecule but also to transfer of the electron from the nitrogen atom to the atoms of the adsorbent; this is recorded in the EPR spectrum in the form of an F-center. On further adsorption, the NO molecules are adsorbed both on the nitrogen atom and on the oxygen atom of the first molecule; thus, NO₂ and N₂O are formed.     

Viskoelastische Eigenschaften von Polyisobutylenen in verdünnten Lösungen

Zusammenfassung Die Speicher- und VerlustmodulnG undG verdünnter Lösungen (2–4%) dreier Isobutylenpolymerisate mit den Molekulargewichten 0,63, 1,29 und 11×10⁵ wurden in der Apparatur vonBirnboim undFerry über einen Frequenzbereich von 0,4–400 Hz und einen Temperaturbereich von –17,5 bis 25,0° bestimmt. Für die scharf fraktionierten Polymerisate von niederem Molekulargewicht ergab die Frequenzabhängigkeit der Moduln eine ausgezeichnete Übereinstimmung mit der Theorie vonZimm. Die aus den experimentell erhaltenen Kurven ermittelten Molekulargewichte und größten Relaxationszeiten waren von der erwarteten Größenordnung. Für das Polymerisat mit höherem Molekulargewicht entsprach die Frequenzabhängigkeit vonG undG – _s jedoch der Theorie vonRouse. Der Einfluß der hydrodynamischen Wechselwirkung in der Bewegung der Knäuelsegmente, in welchem der Unterschied zwischen den beiden Theorien besteht, erscheint als von der Größe des Molekulargewichts abhängig.

---

Summary The storage and loss moduliG andG of dilute (2–4%) solutions of three polyisobutylenes of molecular weight 0.63, 1.29, and 11×10⁵ were determined in the apparatus ofBirnboim andFerry over a frequency range of 0.4 to 400 cps, and a temperature range of –17.0 to 25.0°. The sharply fractionated polymers of low molecular weight showed a frequency dependence in excellent agreement with the theory ofZimm. The experimentally determined molecular weights and terminal relaxation times were of the expected order of magnitude. The frequency dependence of the polymer of highest molecular weight, however, conformed more closely to the theory ofRouse. The influence of the hydrodynamic interaction on the motion of the coil segments, which constitutes the difference in the two theories, appears to depend on the magnitude of the molecular weight.

     

Fluorimetric determination of boron with resacetophenone as a reagent

Summary A method has been developed for the fluorimetric determination of boric acid, which gives a blue fluorescence with resacetophenone in sulphuric acid or phosphoric acid medium. The method has the advantage that the reaction does not require much time, because the fluorescence intensity reaches its maximum immediately after mixing the reagents and does not also decrease with time. The intensity of fluorescence can be measured with a fluorimeter and the amount of boric acid determined from a calibration curve.     

Hydroformylation and hydrocarbethoxylation of 1,2-dicarbethoxy-1,2,3,6-tetrahydropyridazine and 1,2-dicarbethoxy-1,2,3,4-tetrahydropyridazine

The unsaturated compounds 1,2-dicarbethoxy-1,2,3,6-tetrahydropyridazine 1 and 1,2-dicarbethoxy-1,2,3,4-tetrahydropyridazine 2 have been hydroformylated and hydrocarbethoxylated in the presence of some well known cobalt, rhodium, palladium and platinum catalysts. The hydroformylation reaction can be tuned by a suitable choice of the catalyst precursor and reaction conditions, thus allowing the synthesis with high selectivity of one of the two possible isomeric aldehydes. The carbonylation reaction is less synthetically useful, since it shows low activity and unsatisfactory chemo- and regio-selectivity. However, the ester 1,2,4-tricarbethoxyhexahydropyridazine 10 can be prepared in good yield from olefin 1 by using the complex [PdCl₂(PPh₃)₂] as the catalyst precursor.     

Analytical applications of crown ethers : III. Extraction and determination of nitrophenol isomers

The oxidation of aldehydes by dicyclohexyl-18-crown-6-potassium permangante complex is presented. Results obtained by this procedure showed that the presence of crown ether (DCC) and the catalyst play an important role in the oxidation of the aldehydes. The stoichiometry found corresponds to 2 μeq of permanganate per 1 μmol of aldehydes in all cases. Alcohols and ketones are not oxidized. Finally, a method for quantitative evaluation of aldehydes is proposed.     

Synthesis, tautomeric states and crystal structure of (Z)-ethyl 2-cyano-2-(3H-quinazoline-4-ylidene) acetate and (Z)-ethyl 2-cyano-2-(2-methyl-3H-quinazoline-4-ylidene) acetate

The new compounds (Z)-ethyl 2-cyano-2-(3H- and 2-methyl-3H-quinazoline-4-ylidene) acetate (1 and 2, respectively) were synthesized by multi-step reactions. The structures in a solution have been determined by (1)H-NMR spectroscopy and in the crystal form by X-ray analysis. Molecule 1 crystallized in a primitive monoclinic cell, space group capital ER, P2(1/c). The cell dimensions are a=7.970(6) A, b=7.061(2) A, c=20.537(7) A, beta=97.69(5) degrees , V=1145.3(10) A(3). Molecule 2 crystallized in a triclinic cell, space group P-1, the cell dimensions are a=8.196(5) A, b=8.997(6) A, c=9.435(4) A, alpha=74.22(4) degrees, beta=89.75(4) degrees , gamma=74.07(5) degrees , V=641.9(6) A(3). In both compounds the presence of intra-molecular NH---O=C hydrogen bonding between the nitrogen atom in position 3 of the quinazoline ring and a carbonyl group of the ethyl cyanoacetate residue was proven by quantum-chemical, (1)H-NMR and X-ray methods.     

The mixed-aldehyde synthesis of difunctional tetraarylporphyrins

The synthesis is reported of nine unsymmetrical, meso-substituted porphyrins. Among the compounds prepared are the following 5-(R)-10,15,20-tri-p-tolylporphyrins; R = 2,6-dinitrophenyl, 4-hydroxy-3-ethoxy-phenyl, 4-hydroxy-3-methoxy-5-nitrophenyl, 5-hydroxy-2-nitrophenyl and 4-hydroxy-3-nitrophenyl. Other porphyrins reported include 5-(2-(1-butoxy)phenyl)-15-(2-nitrophenyl)-10-15-di-p-tolylporphyrin and the two 5-(R)-10-15,20-tripropylporphyrins in which R = 2-nitrophenyl and 2-hydroxyphenyl. The disubstituted porphyrins offer a rational route to the synthesis of difunctional “tailed-porphyrins”.