Laser-based Surface Modifications of Aluminum and its Alloys

Aluminum (Al) and its alloys have widespread engineering applications because of their higher strength to weight ratio, ductility, and formability. However, in various applications, mechanical properties such as hardness, corrosion, wear, and fatigue resistance are prerequisite at near surface regions. Such localized modification without affecting the bulk phase can be performed by various surface-engineering approaches including electro-deposition, physical and chemical vapor depositions, thermal spraying, plasma spraying, and organic polymeric coatings. Delamination failure of such coatings from the substrate is often inevitable due to the difference in film-to-substrate elastic modulus associated with the aforementioned processes. Recently, researchers have adopted a new approach of laser surface engineering to modify the near surface regions of metallic substrate by laser beams resulting in superior mechanical properties with the formation of novel microstructures. In this article, the recent developments in the surface modification of Al and its alloy by laser treatment are reviewed. Processing parameters and resulting microstructures of Al and its alloys are briefly summarized, along with their impact on mechanical properties. Finally, this article concludes future research directions.     

Autler-Townes triplet spectroscopy: An analytical approach

In Ref. [Opt. Commun. 273, 464-472 (2007)] we studied Autler-Townes triplet spectrum. The presented results were not easy to display in readable and transparent form because the operating physical mechanism is hidden by the algebraic complexity. Here we present analytical results in a very simple and interpretable form. These results enable us to get a new insight into the interference mechanism in a quiet clear manner. We have given a new dimension to the problem in calculating the emission spectrum by state vector method. New estimates are given to measure the spectroscopic parameters in analytical fashion. The interference mechanism in the excited three decaying dressed state is effectively explored which splits the single Lorentzian peak to three spectral components due to two dark lines. The width of each spectral component can be narrowed to up to 0.05Γ.     

Mercury(II) cyanide complexes of thioureas and the crystal structure of [(N-methylthiourea)2 Hg(CN)2]

Mercury(II) cyanide complexes of thioureas (Tu), N-methylthiourea (MeTu), and N,N′-dimethylthiourea (DmTu)) have been prepared and characterized by IR and NMR (¹H and ¹³C) spectroscopy, and the crystal structure of one of them was determined by X-ray crystallography. An upfield shift in ¹³C NMR and downfield shifts in ¹H NMR are consistent with the sulfur coordination to mercury(II). The appearance of a band around 2200 cm^?1 in IR and a resonance around 145 ppm in ¹³C NMR indicates the binding of cyanide to mercury(II). The NMR data show that the [(Thione)₂Hg(CN)₂] complexes are stable in solution and undergo no redistribution reactions. In the crystal structure of the title complex, mercury atom is coordinated to two thione sulfur atoms of MeTu and to two cyanide carbon atoms in a distorted tetrahedral mode with the bond angles in the range of 90.2(2)°–169.3(3)°.     

PIKfyve,a Class III PI Kinase,Is the Target of the Small Molecular IL-12/IL-23 Inhibitor Apilimod and a Player in Toll-like Receptor Signaling

1. Download : Download high-res image (347KB)
2. Download : Download full-size image

     

Piper nigrum: Micropropagation, Antioxidative enzyme activities, and Chromatographic Fingerprint Analysis for Quality Control

A reliable in vitro regeneration system for the economical and medicinally important Piper nigrum L. has been established. Callus and shoot regeneration was encouraged from leaf portions on Murashige and Skoog (MS) medium augmented with varied concentrations of plant growth regulators. A higher callus production (90 %) was observed in explants incubated on MS medium incorporated with 1.0 mg?L^?1 6-benzyladenine (BA) along with 0.5 mg?L^?1 gibberellic acid after 4 weeks of culture. Moreover, a callogenic response of 85 % was also recorded for 1.0 mg?L^?1 BA in combination with 0.25 mg?L^?1 α-naphthalene acetic acid (NAA) and 0.25 mg?L^?1 2,4-dichlorophenoxyacetic acid or 0.5 mg?L^?1 indole butyric acid (IBA) along with 0.25 mg?L^?1 NAA and indole acetic acid. Subsequent sub-culturing of callus after 4 weeks of culture onto MS medium supplemented with 1.5 mg?L^?1 thiodiazoran or 1.5 mg?L^?1 IBA induced 100 % shoot response. Rooted plantlets were achieved on medium containing varied concentrations of auxins. The antioxidative enzyme activities [superoxide dismutase (SOD), peroxidase (POD), catalase (CAT), and ascorbate peroxidase (APX)] revealed that significantly higher SOD was observed in regenerated plantlets than in other tissues. However, POD, CAT, and APX were higher in callus than in other tissues. A high-performance liquid chromatography (HPLC) fingerprint analysis protocol was established for quality control in different in vitro-regenerated tissues of P. nigrum L. During analysis, most of the common peaks represent the active principle “piperine.” The chemical contents, especially piperine, showed variation from callus culture to whole plantlet regeneration. Based on the deviation in chromatographic peaks, the in vitro-regenerated plantlets exhibit a nearly similar piperine profile to acclimated plantlets. The in vitro regeneration system and HPLC fingerprint analysis established here brought a novel approach to the quality control of in vitro plantlets, producing metabolites of interest with substantial applications for the conservation of germplasm.     

Synthesis and antimicrobial activity of novel oxysterols from lanosterol

Chemically diverse oxysterols and their synthetic manipulations were carried out from variety of Δ⁸⁽⁹⁾-lanosterol derivatives and evaluated for their in vitro antimicrobial activities. Most of the synthesized oxysterols exhibited significant antifungal activity against the tested strains.     

Single-cell protein analysis of a single mouse embryo by two-dimensional capillary electrophoresis

The characterization of protein expression from a single-cell mouse embryo using two-dimensional capillary electrophoresis (2D-CE) is described. These zygotes were obtained from Hsf1 gene knockout mice. Single zygotes were lysed off-column and proteins were fluorescently labeled using the fluorogenic dye 3-(2-furoyl)quinoline-2-carboxaldehyde (FQ). After injection, analytes were separated first according to molecular weight using capillary sieving electrophoresis (CSE) and then by micellar electrokinetic capillary chromatography (MEKC) to obtain protein expression fingerprints. Analytes were detected in a sheath flow cuvette using laser-induced fluorescence. In a 1-h 2D-CE separation, over 100 components were resolved with a spot capacity of 380.     

A Critical Review on Physical Vapor Deposition Coatings Applied on Different Engine Components

Friction and wear in different engine components have crucial effects on the engine performance, combustion efficiency, oil consumption and lifetime of the internal combustion (IC) engine. Under certain loads, speeds, and temperatures, the metallic components of the IC engine, especially the piston and valve system suffer from a higher friction. Thin film coating is one of the novel techniques to reduce the frictional forces and improve the mechanical properties of engine components. Due to some versatile tribological properties, increasing attention has been paid to the physical vapor deposition (PVD) technology in the recent decade to deposit thin film coating on engine components. This article presents a comprehensive literature review on thin film coatings for IC engine components deposited by PVD technique. Issues related to tribological properties (wear and coefficient of friction) and mechanical properties (hardness and roughness) are also highlighted. Scientific improvements are presented in the light of literature. It is revealed that PVD coating is significantly effective on wear resistance, scuffling resistance, surface roughness, and friction of the components in IC engine. Laboratory test and data from actual service so far suggest that the plasma-activated electron beam evaporation coating is perhaps one of the best choices for smooth surface finishing with improved mechanical and tribological properties. However, there are still some problems in its practical usage. This compressive review paper presents the major shortcomings of PVD coatings on IC engine components and the possible solutions if any. Finally, a number of issues have been reported which need to be encountered for further studies.     

Autler-Townes triplet spectroscopy

We study the effects of quantum interference in the spontaneous emission spectrum of a four-level driven atomic system. We use three strong laser fields to drive the atom and a weak laser field to prepare the initial state of the atom. The atomic system exhibits Autler-Townes triplet in the spectrum. The single Lorentzian peak splits into triplet and their widths are controlled by the relative strengths of the laser fields.     

Polymerized fluorescent liposomes incorporating lanthanide ions

This paper describes the design and synthesis of a polymerizable lipid capable of complexing lanthanide ions. The lipid has been successfully incorporated into liposomes and then polymerized. Fluorescence studies indicate that the diacetylene (unpolymerized lipid) and the conjugated alkenes (after polymerization) can be used as sensitizers for the lanthanide ion.