Simultaneous bioanalysis and pharmacokinetic interaction study of acebrophylline,levocetirizine and pranlukast in Sprague–Dawley rats

The combination of acebrophylline (ABP), levocetirizine (LCZ) and pranlukast (PRN) is used to treat allergic rhinitis, asthma, hay‐fever and other conditions where patients experience difficulty in breathing. This study was carried out with the aim of developing and validating a reverse‐phase high‐performance liquid chromatographic bioanalytical method to simultaneously quantitate ABP, LCZ and PRN in rat plasma. The objective also includes determination of the pharmacokinetic interaction of these three drugs after administration via the oral route after individual and combination treatment in rat. Optimum resolution between the analytes was observed with a C₁₈ Kinetex column (250 mm × 4.6 mm × 5 μm). The chromatography was performed in a gradient elution mode with a 1 mL/min flow rate. The calibration curves were linear over the concentration range of 100–1600 ng/mL. The intra‐ and inter‐day precision and accuracy were found to be within acceptable limits as specified in US Food and Drug Administration guideline for bioanalytical method validation. The analytes were stable on the bench‐top (8 h), after three freeze–thaw cycles, in the autosampler (8 h) and as a dry extract (?80°C for 48 h). The statistical results of the pharmacokinetic study in Sprague–Dawley rats showed a significant change in pharmacokinetic parameters for PRN upon co‐administration of the three drugs.     

Organic superalkalis with closed-shell structure and aromaticity

Benzene (C₆H₆) and polycyclic hydrocarbons such as naphthalene (C₁₀H₈), anthracene (C₁₄H₁₀) and coronene (C₂₄H₁₂) are well known aromatic organic compounds. We study the substitution of Li replacing all H-atoms in these hydrocarbons using density functional method. The vertical ionisation energy of such lithiated species, i.e. C₆Li₆, C₁₀Li₈, C₁₄Li₁₀ and C₂₄Li₁₂ ranges 4.24–4.50 eV, which is lower than the ionisation energy (IE) of Li atom. Thus, these species may behave as superalkalis due to their lower IE than alkali metal. However, these lithiated species possess planar and closed-shell structure, unlike typical superalkalis. Furthermore, all Li-substituted species are aromatic although their degree of aromaticity is reduced as compared to corresponding hydrocarbon analogues. We have further explored the structure of C₆Li₆ as star-like, unlike its inorganic analogue B₃N₃Li₆, which appears as fan-like structure. We have also demonstrated that the interaction of C₆Li₆ with a superhalogen (such as BF₄) is similar to that of a typical superalkali (such as OLi₃). This may further suggest that the proposed lithiated species may form a new class of closed-shell organic superalkalis with aromaticity.     

Effect of polymer and ion concentration on mechanical and drug release behavior of gellan hydrogels using factorial design

Developing optimized hydrogel products requires an in-depth understanding of the mechanisms that drive hydrogel tunability. Here, we performed a full 4 × 4 factorial design study investigating the impact of gellan, a naturally derived polysaccharide (1%, 2%, 3%, or 4% w/v) and CaCl₂ concentration (1, 3, 7, or 10 mM) on the viscoelastic, swelling, and drug release behavior of gellan hydrogels containing a model drug, vancomycin. These concentrations were chosen to specifically provide insight into gellan hydrogel behavior for formulations utilizing polymer and salt concentrations expanding beyond those commonly reported by previous studies exploring gellan. With increasing gellan and CaCl₂ concentration, the hydrogel storage moduli (0.1–100 kPa) followed a power-law relationship and on average these hydrogels had higher liquid absorption capability and greater total drug release over 6 days. We suggest that the effects of gellan and CaCl₂ concentration and their interactions on hydrogel properties can be explained by various phenomena that lead to increased swelling and increased resistance to network expansion.     

Ecofriendly synthesis and biological evaluation of 4-(4-nitro-phenyl)-2-phenyl-1,4-dihydro-benzo[4,5]imidazo[1,2-a]pyrimidine-3-carboxylic acid ethyl ester derivatives as an antitubercular agents

An ecofriendly route has been investigated for the synthesis of 4-(4-nitro-phenyl)-2-phenyl-1,4-dihydro-benzo[4,5]imidazo[1,2-a]pyrimidine-3-carboxylic acid ethyl ester derivatives by one-pot, three-component condensation of ethyl benzoylacetate, aromatic aldehydes, and 2-amino benzimidazole using 260?mol% of citric acid as reaction mediator. Citric acid is an inexpensive, nontoxic, and green medium with smoothly activates the rate of reaction. The synthesized compounds were assessed for in vitro antimycobacterial activity against Mycobacterium tuberculosis H₃₇RV strain using the microplate alamar blue assay (MABA). The results indicate that among all the synthesized compound series, P-4 and P-9 compounds illustrate effective activity with a minimum inhibitory concentration of 25?µg/ml.     

Determination of terbinafine in human plasma using UPLC–MS/MS: Application to a bioequivalence study in healthy subjects

A high‐throughput and sensitive ultra‐performance liquid chromatography–tandem mass spectrometry (UPLC–MS/MS) method has been developed for the determination of terbinafine in human plasma. The method employed liquid–liquid extraction of terbinafine and terbinafine‐d7 (used as internal standard) from 100 μL human plasma with ethyl acetate–n‐hexane (80:20, v/v) solvent mixture. Chromatography was performed on a BEH C₁₈ (50 × 2.1 mm, 1.7 μm) column using acetonitrile–8.0 mm ammonium formate, pH 3.5 (85:15, v/v) under isocratic elution. For quantitative analysis, MS/MS ion transitions were monitored at m/z 292.2/141.1 and m/z 299.1/148.2 for terbinafine and terbinafine‐d7, respectively, using electrospray ionization in the positive mode. The method was validated according to regulatory guidance for selectivity, sensitivity, linearity, recovery, matrix effect, stability, dilution reliability and ruggedness with acceptable accuracy and precision. The method shows good linearity over the tested concentration range from 1.00 to 2000 ng/mL (r² ≥ 0.9984). The intra‐batch and inter‐batch precision (CV) was 1.8–3.2 and 2.1–4.5%, respectively. The method was successfully applied to a bioequivalence study with 250 mg terbinafine in 32 healthy subjects. The major advantage of this method includes higher sensitivity, small plasma volume for processing and a short analysis time.     

Efficient monooleoyl glycerol synthesis employing hybrid ultrasonic-infrared-wave promoted reactor: Concurrent catalytic and noncatalytic esterification kinetics

For the first time, intensification of monooleoyl glycerol (MOG) synthesis has been investigated in an ultrasonic-infrared-wave (USIRW) promoted batch reactor. Esterification of octadecanoic acid (ODA) with glycerol (Gl) has been conducted [using Amberlyst 36 wet catalyst] in three different reactors, namely traditional batch reactor (TBR), infrared wave promoted batch reactor (IRWPBR), and USIRW-promoted batch reactor (USIRWPBR) to assess the relative efficacy. The energy-efficient USIRWPBR remarkably intensifies the ODA-Gl esterification as manifested through superior ODA conversion (92.5 ± 1.25%) compared to that achieved in IRWPBR (79.8 ± 1.2%) and TBR (36.39 ± 1.25%). The most favorable reaction condition for optimum ODA conversion and maximum MOG yield was identified through statistical optimization over a selected parametric range, namely 3-5 Gl/ODA mole ratio, 0.004-0.006 g/mL Amberlyst 36 catalyst concentration, 300-700 rpm impeller speed, and 333-353 K reaction temperature. The present study also reports the formulation and validation of an innovative reaction kinetics, that is, concurrent noncatalytic and heterogeneously catalyzed (CNCHC) reaction mechanism in addition to the conventional heterogeneous kinetic models (LH and Eley-Rideal mechanisms). Under combined USIRW, the CNCHC esterification mechanism could best describe ODA-Gl esterification (R² = 0.98) compared to LH (R² = 0.97) and Eley-Rideal (R² = 0.88) mechanisms. The optimal product (MOG) was characterized by differential scanning calorimetry and thermogravimetric analysis to assess its crystallization property and thermal stability for possible application as plasticizer/fuel additives.     

Highly Selective Asymmetric Intramolecular Selenocyclisation

Asymmetric intramolecular selenocyclisation of alkenoic acids, alkenols and alkenyl urethanes using chiral ferrocenylselenenyl cations proceeds smoothly to give the corresponding lactones, cyclic ethers and N-heterocyclic compounds, respectively, in moderate yields with very high diastereoselectivities.     

Synthesis and characterization of various phases of cobalt oxide nanoparticles using inorganic precursor

Controllable and uniform doping of nanowires (NWs) is the ultimate challenge prior to their effective application. Si NWs amorphize and bend toward the impinging ions under ion irradiation as a result of viscous flow. We demonstrate that thermal annealing induces a full recovery of the crystalline phase corresponding to the unbending of the NWs. The competition between Solid Phase Epitaxy and Random Nucleation and Growth at the nanoscale is the key parameter controlling the recovery.     

Substituted Diorganotin(IV) O,O’-Alkylene Dithiophosphates: Synthesis and Spectral Aspects

Six new substituted diphenyltin(IV) O,O′-alkylene dithiophosphates, (C₆H₅)₂Sn(X)S(S) POGO [G = —CH₂C(CH₃)₂CH₂—, X = Cl (1), SCN (3), ClO₄ (5); G = —CH₂C (C₄H₉)(C₂H₅)CH₂—, X = Cl (2), SCN (4), ClO₄ (6)], were synthesized by the reaction of the corresponding ammonium salts of the O,O’-alkylene dithiophosphates with an appropriate organotin(IV) chloride. The compounds were characterized on the basis of elemental and spectral analyses (ESI mass spectrometry, IR, ¹H, ¹³C, ³¹P, and ¹¹⁹Sn NMR). The presence of a four-coordinated Sn atom and monodentate O,O’-alkylene dithiophosphate moiety in compounds 1–4 as well as bidentate O,O’-alkylene dithiophosphate unit in compounds 5,6 is established.     

Functionalized Organotellurium Halides: Synthesis,Characterization, and Observation of Intra- and Intermolecular Secondary Bonding

Abstract

Activated tellurium, but not selenium, reacts with para-substituted benzoylmethyl bromides as well as with iodoacetamide at their melting points in absence of a solvent to give bis(p-substituted benzoylmethyl)tellurium dibromides, (p-YC₆H₄COCH₂)₂TeBr₂, (Y = H, Me, and MeO) and bis(acetamido)tellurium diiodide, (H₂NCOCH₂)₂TeI₂, respectively. Quick reduction of (p-YC₆H₄COCH₂)₂TeBr₂, with sodium metabisulphite in a two-phase system yields crystalline (p-YC₆H₄COCH₂)₂Te. These tellurides undergo smooth oxidative addition of halogens, interhalogen ICl or a pseudohalogen (SCN)₂. Intramolecular coordination of the carbonyl group in these functionalized diorganotellurium dihalides is evident from IR spectra and shorter Te···O (carbonyl) distances in comparison to the sum of van der Waals radii and completes six coordination around Te atom. Not unexpectedly, therefore, intermolecular secondary bonding effects of the type Te…O, Te···X and X···X are missing in (PhCOCH₂)₂TeBr₂, (p-MeOC₆H₄COCH₂)TeBr₂ and (PhCOCH₂)₂TeI₂. Instead, these compounds provide rare examples, among organotellurium compounds, of supramolecular architecture, where C–H···Br and C–H···O hydrogen bonds and π-π (phenyl ring) interactions appear to be the noncovalent intermolecular associative forces that dominate the crystal packing.