Crystal Structure of Mononuclear Non-Heme Nikel(II) Octahedral Complex: [Ni(bqenH<Subscript>2</Subscript>)(bpy)](ClO<Subscript>4</Subscript>)<Subscript>2</Subscript>·0.125H<Subscript>2</Subscript>O

The crystal structure of a mononuclear Ni(II) complex [Ni(bqenH₂)(bpy)](ClO₄)₂·0.125H₂O 1 (where bqenH₂ is N,N′-bis(8-quinolyl)ethane-1,2-diamine, bpy = 2,2′-bipyridine) is reported here. The crystallographic data for 1 are as follows: monoclinic crystal system, P2_1/n space group, a = 17.3255(11), b = 10.6110(7), c = 34.328(2) Å, α = 90°, β = 93.9480(13)°, γ = 90°, V = 6295.8(7) ų, Z = 4, d_x = 1.541 mg/m³. The nickel(II) ion coordinates four N atoms of the tetradentate ligand bqenH₂ and two N atoms of the auxiliary bidentate 2,2′-bipyridine ligand, resulting in a slightly distorted NiN6 octahedron with two perchlorates serving as charge balancing counter anions. The overall structure of 1 is stabilized by the presence of water of crystallization in the crystal lattice. The crystal structure shows two symmetrically identical octahedral NiN6 units in its asymmetric unit. The extensive hydrogen bonding network resulting in a supramolecular architecture is observed due to the N–H?O, O–H?O, O–H?Cl, and N–H?Cl interactions.     

Effect of N-doping on hard carbon nano-balls as anode for Li-ion battery: improved hydrothermal synthesis and volume expansion study

Using an improved single-step hydrothermal method, mesoporous hard carbon nano-balls, with nitrogen doping, have been successfully synthesized. These materials exhibit good reversible charge capacity during half-cell tests. Gravimetric capacity for undoped nano-sized and micron-sized mesoporous hard carbon balls is 506 and 475 mAh g^?1, respectively. After nitrogen doping, the specific gravimetric capacities of both nano- and micron-sized carbon balls increase by 6.9 and 8%, respectively. Nitrogen doping enhances retention in specific capacity of both anode materials, particularly in nano-sized carbon balls with capacity retention of 83.9% after 100 cycles. The enhancement is attributed to a significant decrease in volume expansion due to the nitrogen doping. Density functional theory-based computation confirms the reduction of volume expansion by 60%. Improved electrochemical performance of nitrogen-doped hard carbon is due to the drop in volume expansion rate during lithiation along with increased porosity and electronic conductivity. Furthermore, this one-step synthesis can be extended to other carbon sources to get nitrogen-doped hard carbon with sizes varying from micro to nano.     

Structures and basicity of LiNOH (N = 1 − 5) species

LiOH is one of the strong bases among neutral molecules. What about hydroxides of small Li_n (n = 2 ? 5) clusters? The addition of a single atom to a cluster sometimes has dramatic effects on its reactivity. This fact motivated us to perform an ab initio MP2/6‐311++G(d, p) investigation on Li_nOH species (n = 1 ? 5). These Li_nOH species are stabilized by both ionic as well as covalent interactions, and are found to be stable against elimination of LiOH and OH. We have determined their gas and aqueous phase basicity by considering hypothetical protonation reactions. The calculated proton affinities of Li_nOH (n ≥ 2) suggest their reduced basicity as compared to LiOH by 50–100 kJ/mol. The NBO charges and the highest occupied molecular orbitals also reveal the electride and alkalide characteristics of Li₂OH and Li₃OH, respectively. © 2016 Wiley Periodicals, Inc.     

Autonomously Propelled Motors for Value‐Added Product Synthesis and Purification

A proof‐of‐concept design for autonomous, self‐propelling motors towards value‐added product synthesis and separation is presented. The hybrid motor design consists of two distinct functional blocks. The first, a sodium borohydride (NaBH₄) granule, serves both as a reaction prerequisite for the reduction of vanillin and also as a localized solid‐state fuel in the reaction mixture. The second capping functional block consisting of a graphene–polymer composite serves as a hydrophobic matrix to attract the reaction product vanillyl alcohol (VA), resulting in facile separation of this edible value‐added product. These autonomously propelled motors were fabricated at a length scale down to 400 μm, and once introduced in the reaction environment showed rapid bubble‐propulsion followed by high‐purity separation of the reaction product (VA) by the virtue of the graphene–polymer cap acting as a mesoporous sponge. The concept has excellent potential towards the synthesis/isolation of industrially important compounds, affinity‐based product separation, pollutant remediation (such as heavy metal chelation/adsorption), as well as localized fuel‐gradients as an alternative to external fuel dependency.     

Analytical aspects of some organic acids Part III

Summary m-Phenylenedioxydiacetic acid gives a white precipitate with thorium even in the absence of an electrolyte which is quantitative up toph 4. Be²⁺, Mg²⁺, Ca²⁺, Zn²⁺, Pb²⁺ and Mn²⁺ ions are removed by single precipitation and Al³⁺, UO₂ ²⁺ and trivalent cerite earth ions are removed by double precipitation. Sn²⁺, Sn⁴⁺ and Cr³⁺ ions interfere.Part II: See. Z. analyt. Chem.165, 343 (1959).     

Mass spectrometric determination of the heats of formation of the silane bromides

The reaction of SiBr₄(g) with H₂(g) in the temperature range 900–1143 K has been studied by a mass spectrometric method. Second and third law reaction enthalpies were obtained for SiBr₄(g) + H₂(g) = SiHBr₃(g) + HBr(g), SiHBr₃(g) + H₂(g) = SiH₂Br₂(g) + HBr(g), and SiH₂Br₂(g) + H₂(g) = SiH₃Br(g) + HBr(g). From the heats of reaction, third-law ΔH_£298 values of ?72.5 ± 1, ?43.2 ± 1.5 and ?15.3 ± 0.5 kcal/mole were obtained for SiHBr₃(g), SiH₂Br₂(g), and SiH₃Br(g), respectively.     

The complexes of aluminium,gallium, and indium with calmagite: Evaluation of stepwise stability constants

Summary Calmagite [1-(1-hydroxy-4-methyl-2-phenyl azo)-2-naphthol sulphonic acid], dissociates in two steps. It forms violet complexes with Al³⁺, Ga³⁺ and In³⁺. The stepwise proton-ligand stability constants of calmagite and stepwise metal-ligand stability constants of these complexes were evaluated by potentiometric titration technique ofBjerrum andIrving andRossotti. The order of the stabilities of complexes is In³⁺ > Ga³⁺ > > Al³⁺.

---

Zusammenfassung Camalgit [1-(1-Hydroxy-4-methyl-2-phenylazo)-2-naphtholsulfonsäure] dissoziiert in zwei Stufen und bildet violette Komplexe mit Al(III), Ga(III) und In(III). Die Konstanten der Dissoziationsstufen der freien Säure und die der Metallkomplexe wurden potentiometrisch nachBjerrum bzw.Irving undRossotti ermittelt. Die Stabilität der Komplexe nimmt in der Reihe In(III) > Ga(III) > Al(III) ab.

     

Reversible loading and unloading of nanoparticles in "exponentially" growing polyelectrolyte LBL films

The exponentially growing layer-by-layer (LBL) films made from poly(diallyldimethylammonium chloride) (PDDA) and poly(acrylic acid) (PAA) were used to load and unload the CdTe nanoparticles (NPs). The reversible loading of NPs were investigated through UV-vis studies and further confirmed by confocal microscopy. In addition the LBL films were also compared for the release kinetics for pH 9 and 7 and films capped with (PDDA-PSS)10 layers. The amount of released particles at pH 9 was found to be at least 2 orders of magnitude higher than those at pH 7 and with (PDDA-PSS)10 capped layers after 25 h. This variation in film response for CdTe-particle release presents a route for studies in which highly swollen exponentially growing LBL films can be loaded with functionalized NPs for biological applications and explored as carriers to hold the NPs inside the films for self-assembly.     

Constructing ‘hair’ for the three charge hole

It has been found that the states of the 2-charge extremal D1–D5 system are given by smooth geometries that have no singularity and no horizon individually, but a ‘horizon’ does arise after ‘coarse-graining’. To see how this concept extends to the 3-charge extremal system, we construct a perturbation on the D1–D5 geometry that carries one unit of momentum charge P. The perturbation is found to be regular everywhere and normalizable, so we conclude that at least this state of the 3-charge system behaves like the 2-charge states. The solution is constructed by matching (to several orders) solutions in the inner and outer regions of the geometry. We conjecture the general form of ‘hair’ expected for the 3-charge system, and the nature of the interior of black holes in general.