Barium Sodium Niobate Powders and Thin Films: Preparation and Ferroelectric Behavior

Powders and thin films of barium sodium niobate, Ba₄Na₂Nb₁₀O₃₀, of filled tungsten bronze type ferroelectric were processed by a sol-gel route using barium metal, niobium ethoxide and sodium methoxide as precursors. Polycrystalline powder resulted after heat treating the gel powder at or above 650°C. Thin films of Ba₄Na₂Nb₁₀O₃₀ showed no preferred orientation on Si(100), Pt/Si(100) and sapphire substrates. Hysteresis measurements at 1 kHz for the thin films annealed at 750°C, obtained using a prehydrolyzed precursor solution, and gave remanent polarization of 17.34 µC/cm² and coercive field of 62.5 kV/cm. Microstructural investigation of surface morphology of these films revealed grains about 0.3 µm in size. Prehydrolysis of the precursor solution was found to be necessary to achieve dense films with ferroelectric properties.     

Dehydration of 1,4-dioxane through blend membranes of poly(vinyl alcohol) and chitosan by pervaporation

Blend membranes prepared from poly(vinyl alcohol) (PVA) and chitosan (CS) were crosslinked with glutaraldehyde and used in the pervaporation dehydration of 1,4-dioxane. Membranes were characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and X-ray diffraction (X-RD) to assess, respectively, the intermolecular interactions, thermal stability and crystallinity. Equilibrium sorption studies were carried out in pure liquids and binary mixtures of different compositions of water + 1,4-dioxane mixtures to assess the polymer–liquid interactions. The crosslinked membrane showed a good potential in breaking the azeotrope of 82 wt.% aqueous 1,4-dioxane giving a selectivity of 117 with a reasonable water flux of 0.37 kg/m² h. The effect of operating parameters such as feed composition, membrane thickness and permeate pressure was evaluated.     

Direct photons,dimuons and nuclear effects

Largep _T direct photon and dimuon production in experiments using nuclear targets have been studied in detail. We show that, by a careful choice of kinematic configurations in these experiments, very good estimates of nuclear quark and gluon densities can be obtained. Information on the cumulative region of the nuclear structure functions i.e. the regionx>1 can also be obtained by considering semi-integrated cross sections.     

The first polymorph in the family of nucleobases: a second form of cytosine

A new polymorph of cytosine, C₄H₅N₃O, is reported half a century after the report of its first known crystal structure [Barker & Marsh (1964). Acta Cryst. 17 , 1581–1587]. Cytosine thus provides the first polymorphic example in the category of parent nucleobases. The new form, denoted (Ib), was observed unexpectedly during an attempt to cocrystallize cytosine with catechol. Form (Ib) crystallizes in the orthorhombic centrosymmetric space group Pccn with two molecules in the asymmetric unit. The previously known form, denoted (Ia), crystallizes in the orthorhombic noncentrosymmetric space group P2₁2₁2₁. The cytosine molecule is planar in both forms. Hydrogen‐bonding interactions are also similar for both forms. Infinite one‐dimensional ribbons composed of cytosine base‐pair dimers in R₂²(8) arrangements are observed in both (Ia) and (Ib). However, the way that the ribbons are packed differs in (Ia) and (Ib). This appears to guide the centrosymmetric versus noncentrosymmetric space‐group selection through the formation of an inversion‐related motif in polymorph (Ib) and a helical propagation in polymorph (Ia). A few selected polymorphic systems have been gathered from the Cambridge Structural Database to understand possible structural features responsible for achiral molecules adopting centro‐ and noncentrosymmetric space groups.     

Four oxoindole‐linked α‐alkoxy‐β‐amino acid derivatives

Four structures of oxoindolyl α‐hydroxy‐β‐amino acid derivatives, namely, methyl 2‐{3‐[(tert‐butoxycarbonyl)amino]‐1‐methyl‐2‐oxoindolin‐3‐yl}‐2‐methoxy‐2‐phenylacetate, C₂₄H₂₈N₂O₆, (I), methyl 2‐{3‐[(tert‐butoxycarbonyl)amino]‐1‐methyl‐2‐oxoindolin‐3‐yl}‐2‐ethoxy‐2‐phenylacetate, C₂₅H₃₀N₂O₆, (II), methyl 2‐{3‐[(tert‐butoxycarbonyl)amino]‐1‐methyl‐2‐oxoindolin‐3‐yl}‐2‐[(4‐methoxybenzyl)oxy]‐2‐phenylacetate, C₃₁H₃₄N₂O₇, (III), and methyl 2‐[(anthracen‐9‐yl)methoxy]‐2‐{3‐[(tert‐butoxycarbonyl)amino]‐1‐methyl‐2‐oxoindolin‐3‐yl}‐2‐phenylacetate, C₃₈H₃₆N₂O₆, (IV), have been determined. The diastereoselectivity of the chemical reaction involving α‐diazoesters and isatin imines in the presence of benzyl alcohol is confirmed through the relative configuration of the two stereogenic centres. In esters (I) and (III), the amide group adopts an anti conformation, whereas the conformation is syn in esters (II) and (IV). Nevertheless, the amide group forms intramolecular N—H...O hydrogen bonds with the ester and ether O atoms in all four structures. The ether‐linked substituents are in the extended conformation in all four structures. Ester (II) is dominated by intermolecular N—H...O hydrogen‐bond interactions. In contrast, the remaining three structures are sustained by C—H...O hydrogen‐bond interactions.     

A Magneto-Mechanically Coupled Phase-Field Model at Large Deformation

The aggregate magneto-mechanical behavior of magneto-rheological elastomers (MREs) stems from the magnetic properties of the ferromagnetic inclusion and the mechanical properties of the matrix material. We propose a large deformation micro-magnetic theory, to predict the behavior and interaction of ferromagnetic particles inside an elastomeric matrix. A rate-type variational principle, with the magnetization as the order parameter is proposed. A large deformation Landau-Lifshitz-Gilbert equation for the time evolution of the magnetization, is obtained directly from the proposed variational principle. (© 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Solute�CSolvent Interactions in Aqueous Glycylglycine�CCuCl2 Solutions: Acoustical and Molecular Dynamics Perspective

Acoustical and molecular dynamics studies were carried out to understand the various interactions present in glycylglycine?CCuCl₂ aqueous solutions. Amongst these interactions, hydrogen bonding and solute?Csolvent interactions have been highlighted in this study. The radial distribution function (RDF) was used to investigate solution structure and hydration parameters. Binding of Cu²⁺ with various polar peptide atoms reveals the nature and degree of binding. The formation of complex clusters between glycylglycine and water molecules increases the relaxation time. The first hydration shell considerably influences the structure of the second shell, facilitating the formation of an ordered hydrogen bonded network. Both experimental and theoretical results have proved to be efficient in analyzing the behavior of molecules and to give a clear idea on molecular interactions in solutions.     

Analysis of the ketosynthase-chain length factor heterodimer from the fredericamycin polyketide synthase

The pentadecaketide fredericamycin has the longest carbon chain backbone among polycyclic aromatic polyketide antibiotics whose biosynthetic genes have been sequenced. This backbone is synthesized by the bimodular fdm polyketide synthase (PKS). Here, we demonstrate that the bimodular fdm PKS as well as its elongation module alone synthesize undecaketides and dodecaketides. Thus, unlike other homologs, the fdm ketosynthase-chain length factor (KS-CLF) heterodimer does not exclusively control the backbone length of its natural product. Using sequence- and structure-based approaches, 48 CLF multiple mutants were engineered and analyzed. Unexpectedly, the I134F mutant was unable to turn over but could initiate and partially elongate the polyketide chain. This unprecedented mutant suggests that the KS-CLF heterodimer harbors an as yet uncharacterized chain termination mechanism. Together, our findings reveal fundamental mechanistic differences between the fdm PKS and its well-studied homologs.