Naphthalene dianhydride based selective detection targetable fluorescent probe for monitoring exogenous Iron in living cells

A green emissive PET operating fluorescent turn-on cell permeable novel probe R1 has been successfully developed and utilized for the detection of Fe⁺³ in the pure aqueous system at sub-nanomolar level. Moreover, probe R1 demonstrate highly sensitive and selective towards Fe⁺³ over the other divalent and trivalent metal ions and was established by using fluorescence spectroscopy. The efficiency and aid of R1 was demonstrated by the fluorescence imaging of captured Fe⁺³ within Pollen grains by using fluorescence microscopy. These results indicate that, this is the first fluorescent turn-on PET probe to detect sub-nanomolar Fe⁺³ in the pure aqueous system and in cellular level.     

Structural and spectral studies of an iron(III) complex [Fe(Pranthas)2][FeCl4] derived from 2-acetylpyridine-N(4), N(4)-(butane-1, 4-diyl) thiosemicarbazone (HPranthas)

A novel iron(III) complex of 2-acetylpyridine N(4), N(4)-(butyl-1, 4-diyl) thiosemicarbazone (HPranthas), [Fe(Pranthas)₂]FeCl₄ was synthesized and physico-chemically characterized by means of partial elemental analysis, magnetic measurements (polycrystalline state), UV-Vis and IR spectroscopies. The presence of spin-paired iron(III) cation with ground state is revealed by the EPR and Mössbauer spectral data. Structure of the free ligand HPranthas and the complex [Fe(Pranthas)₂]FeCl₄ were solved by single crystal X-ray diffraction. The framework of iron(III) complex consists of a discrete monomeric cationic entity containing low spin iron(III) in a slightly distorted octahedral environment. The metal ion is bonded to one sulfur and two nitrogens of each thiosemicarbazone molecule. The tetrachloroferrate(III) ion acts as counterion.     

Studies directed towards the synthesis of antascomicin A: stereoselective synthesis of the C22-C34 fragment of the molecule

A stereoselective synthesis of the C22-C34 fragment of the non-immunosuppressive immunophilin-binding natural product, antascomicin A was achieved using d-quinic acid as the starting material and highly stereoselective aldol reactions were employed, as key steps, to build the remaining stereocentres at C23, C26 and C27.     

Enhanced dielectric and magnetic properties of Cr / Co and Mn co-doped single phase multiferroic bismuth ferrite nanoparticles

Multiferroic nanoparticles of single-phase bismuth ferrite (BiFeO₃ or BFO) by choosing transition metal ions of chromium (Cr)/cobalt (Co) in A-sites and manganese (Mn) in B-sites were synthesized by using sol-gel autocombustion method. X-ray diffraction (XRD) data reveal the existence of rhombohedrally distorted perovskite structure for all the samples. High resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDAX) studies were carried out to estimate the particle size, morphology along with the chemical purity of the samples. Dielectric studies as a function of frequency and temperature resemble typical space charge polarization with almost negligible dielectric losses in the doped samples. Magnetic measurements using vibrating sample magnetometer reveals the considerable enhancement in the magnetic order in Co/Cr and Mn co-doped samples. The obtained structural, microstructural, dielectric and magnetic results were well recommended that the influence of co-doping in BFO will certainly modify its spin cycloid structure and hence enhanced properties in these doped samples. Thus, these co-doped samples were suggested to be well suitable for the multifunctional based devices such as spintronic, multifunctional memories, and for sensors.     

Homo- and heteropolynuclear Ni2+ and Cu2+ complexes of polytopic ligands, consisting of a tren unit substituted with three 12-membered tetraazamacrocycles

Two new polytopic ligands L1 and L2 have been synthesized. They consist of a central tren unit to which three 1,4,7,10-tetraazacyclododecane rings are attached via an ethylene and a trimethylene bridge, respectively. The complexation properties of L1 and L2 towards Cu(2+) and Ni(2+) were studied by potentiometric pH titration, UV-Vis, EPR spectroscopy and kinetic techniques. As a comparison, the Cu(2+) and Ni(2+) complexes with L3 (1-(N-methyl-2-aminoethyl-1,4,7,10-tetraazacyclododecane)) were also investigated. The crystal structures of [CuL3H(H(2)O)](ClO(4))(3) and [NiL3Cl](ClO(4)) were solved and show that the side chain in its protonated form is not involved in coordination, whereas deprotonated it binds to the metal ion. The thermodynamically stable 3:1 complexes of L1 or L2 have a metal ion in the three macrocyclic units. However, when three equivalents of Cu(2+) are added to L1 or L2 the metal ion first binds to the tren unit and only then to the macrocycles. The kinetics of the different steps of complexation have been studied and a mechanism is proposed.     

Shock velocity measurements using microwave Doppler shift

A commercially available 10.587 GHz microwave Doppler module is used for the measurement of shock velocity in a conventional shock tube. With proper electronic circuits the Doppler frequency obtained is found to be quite noisefree and consistent for shock velocities in the range of 1.8 mm/sec to 2.0 mm/sec.     

Asymptotics of work distributions in a stochastically driven system

We determine the asymptotic forms of work distributions at arbitrary times T, in a class of driven stochastic systems using a theory developed by Nickelsen and Engel (EN theory) [D. Nickelsen and A. Engel, Eur. Phys. J. B 82, 207 (2011)], which is based on the contraction principle of large deviation theory. In this paper, we extend the theory, previously applied in the context of deterministically driven systems, to a model in which the driving is stochastic. The models we study are described by overdamped Langevin equations and the work distributions in path integral form, are characterised by having quadratic augmented actions. We first illustrate EN theory, for a deterministically driven system – the breathing parabola model, and show that within its framework, the Crooks fluctuation theorem manifests itself as a reflection symmetry property of a certain characteristic polynomial, which also determines the exact moment-generating-function at arbitrary times. We then extend our analysis to a stochastically driven system, studied in references [S. Sabhapandit, EPL 89, 60003 (2010); A. Pal, S. Sabhapandit, Phys. Rev. E 87, 022138 (2013); G. Verley, C. Van den Broeck, M. Esposito, New J. Phys. 16, 095001 (2014)], for both equilibrium and non-equilibrium steady state initial distributions. In both cases we obtain new analytic solutions for the asymptotic forms of (dissipated) work distributions at arbitrary T. For dissipated work in the steady state, we compare the large T asymptotic behaviour of our solution to the functional form obtained in reference [New J. Phys. 16, 095001 (2014)]. In all cases, special emphasis is placed on the computation of the pre-exponential factor and the results show excellent agreement with numerical simulations. Our solutions are exact in the low noise (β →?∞) limit.     

Surface characterization and London dispersive surface free energy of functionalized single-walled carbon nanotubes with a blend of polytetrafluoroethylene by inverse gas chromatography

The SWCNTs and SWCNT-polytetrafluoroethylene (PTFE) blend were prepared by using simple reaction mixture in the presence of chromosorb (SiO₂). Surface morphology of SWCNTs and (SWCNT-PTFE) blend was characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermal gravimetric analysis (TGA), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and surface BET analysis. In addition, the surface thermodynamic properties of n-alkanes and polar probe net retention volumes are measured by inverse gas chromatography (IGC). The London dispersive surface free energy values were found to be decreased linearly with increase of temperature. The specific component of the surface free energy of adsorption for the polar probes was obtained using the Donnet-Park method. The surface character “S” value (K_b/K_a) at SWCNTs was found to be 0.74, and SWCNT-PTFE blend surface character value was found to be 0.86. This result demonstrates that the (SWCNT-PTFE) blend surface contains relatively more acidic sites then that of SWCNT surface. Therefore, the IGC results provide useful complementary information on the (SWCNT-PTFE) blend surface.     

Studies directed towards the total synthesis of lycoperdinosides: stereoselective construction of the C1-C9 and C10-C21 segments of the molecules

The three chiral centres of the C1-C9 moiety of the six-membered lactone glycosides, lycoperdinosides A and B, have been derived from a common starting material containing a single chiral centre. In contrast, the C10-C21 segment of these molecules has been synthesized using, as key steps, a highly stereoselective aldol reaction, a Ti(III)-mediated opening of a trisubstituted epoxy alcohol and an efficient directed hydrostannylation of a suitably substituted internal alkyne.