Chromatographic separation and mass spectrometric identification of positional isomers of polyethylene glycol-modified growth hormone-releasing factor (1-29)

A one-step chromatographic method capable of separating all isomers of polyethylene glycol (PEG)-growth hormone-releasing factor (GRF) (1-29) conjugates was developed. The unmodified GRF (1-29) and seven different isomers of PEG-GRF (1-29) conjugates were separated by using a simple reversed-phase HPLC method depending on the differences of hydrophobicity due to the number and site of PEG attachment. The PEGylation sites of all isomers of PEG-GRF (1-29) conjugates were identified by determining the molecular masses of the Lys-C digested fragments with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. This study is a first report for the separation of all PEG-conjugate isomers and would be useful for further studies to find the promising conjugate by evaluating biological activity and stability of each isomer.     

Fluoride-facilitated deuterium exchange from DMSO-d6 to polyamide-based cryptands

Multiple deuterium exchange between DMSO-d6 and amide hydrogens in two hexaamido cryptand fluoride receptors has been verified by 19F and 2H NMR and FAB mass spectral studies. Structural results for one of the complexes indicate a tricapped trigonal prism hydrogen bond coordination geometry around an encapsulated fluoride, with hydrogen bonds from fluoride to six amide and three phenyl hydrogens.     

Sensitivity of methyl thiolate desulfurization selectivity to reaction temperature and hydroxyl coverage

The adsorption and reaction of methanethiol (CH3SH) and dimethyl disulfide (CH3SSCH3) on Mo(110)-(1 x 6)-O have been studied using temperature-programmed reaction spectroscopy and reflection-absorption infrared spectroscopy over the temperature range of 110-550 K. The S-H bond is broken upon adsorption to form adsorbed OH, water, and methyl thiolate (CH3S-) at low temperature. Water is evolved at 210 and 310 K via molecular desorption and disproportionation of OH, respectively. Some hydroxyl remains on the surface up to 350 K. Methyl thiolate is also formed from CH3SSCH3 on Mo(110)-(1 x 6)-O. Methyl thiolate undergoes C-S cleavage above 300 K, yielding methane and methyl radicals. There is also a minor amount of nonselective decomposition leading to the formation of carbon and hydrogen. Methane production is promoted by adsorbed hydroxyl. As the hydroxyl coverage increases, the yield of methyl radicals relative to methane diminishes. Accordingly, there is more methane produced from methanethiol reaction than from dimethyl disulfide, since S-H dissociation in CH3SH produces OH. The maximum coverage of the thiolate is approximately 0.5 monolayers, based on the amount of sulfur remaining after reaction measured by Auger electron spectroscopy. In contrast to cyclopropylmethanethiol (c-C3H5CH2SH), for which alkyl transfer from sulfur to oxygen is observed, there is no evidence for transfer of the methyl group of methyl thiolate to oxygen on the surface. Specifically, there is no evidence for methoxy (CH3O-) in infrared spectroscopy or temperature-programmed reaction experiments.     

Asymmetric cationic coordination environments in new oxide materials: synthesis and characterization of Pb(4)Te(6)M(10)O(41) (M = Nb(5+) or Ta(5+))

Two new isostructural tellurites, Pb(4)Te(6)M(10)O(41) (M = Nb(5+) or Ta(5+)), have been synthesized by standard solid-state techniques using PbO, Nb(2)O(5) (or Ta(2)O(5)), and TeO(2) as reagents. The structures of Pb(4)Te(6)Nb(10)O(41) and Pb(4)Te(6)Ta(10)O(41) were determined by single-crystal and powder X-ray diffraction. The materials exhibit a three-dimensional framework consisting of layers of corner-shared NbO(6) octahedra connected by TeO(3) and PbO(6) polyhedra. The Nb(5+), Te(4+), and Pb(2+) cations are in asymmetric coordination environments attributable to second-order Jahn-Teller effects. The Nb(5+) cations undergo an intraoctahedral distortion either toward a face or a corner, whereas the Te(4+) and Pb(2+) cations are in distorted environments attributable to their lone pair. In addition, the TeO(3) polyhedra strongly influence the direction of the Nb(5+) intraoctahedral distortion. Infrared and Raman spectroscopy, thermogravimetric analysis, and dielectric measurements are also presented. Crystal data: Pb(4)Te(6)Nb(10)O(41), monoclinic, space group C2/m (No. 12), with a = 23.412(3) A, b = 20.114(3) A, c = 7.5008(10) A, beta = 99.630(4) degrees, V = 3482.4(8) A(3), and Z = 4; Pb(4)Te(6)Ta(10)O(41), monoclinic, space group C2/m (No. 12), with a = 23.340(8) A, b = 20.068(5) A, c = 7.472(2) A, beta = 99.27(3) degrees, V = 3453.8(2) A(3), and Z = 4.     

Complexation mechanism of olefin with silver ions dissolved in a polymer matrix and its effect on facilitated olefin transport

Remarkable separation performance of olefin/paraffin mixtures was previously reported by facilitated olefin transport through silver-based polymer electrolyte membranes. The mechanism of facilitated olefin transport in solid membranes of AgCF3SO3 dissolved in poly(N-vinyl pyrrolidone) (PVP) is investigated. In silver polymer electrolyte membranes, only free anions are present up to the 2:1 mole ratio of [C=O]:[Ag], and ion pairs start to form at a ratio of 1:1, followed by higher-order ionic aggregates above a ratio of 1:2. At silver concentrations above 3:1, the propylene permeance increases almost linearly with the total silver concentration, unexpectedly, regardless of the silver ionic constituents. It was also found that all the silver constituents, including ion pairs and higher order ionic aggregates, were completely redissolved into free anions under the propylene environment; this suggests that propylene can be a good ligand for the silver cation. From these experimental findings, a new mechanism for the complexation reaction between propylenes and silver salts in silver-polymer electrolytes was proposed. The new mechanism is consistent with the linearity between the propylene permeance and the total silver concentration regardless of the kind of the silver constituents. Therefore, the facilitated propylene transport through silver-polymer electrolytes may be associated mainly with the silver cation weakly coordinated with both carbonyl oxygen atoms and propylene.     

Polymer-supported calix[4]arenes for sensing and conversion of NO2/N2O4

The use of simple calix[4]arenes 1a,b for NO₂/N₂O₄ sensing and conversion is demonstrated, both in solution and in the solid state. Upon reacting with these gases, compounds 1a,b encapsulate reactive NO⁺ cations within their cavities with the formation of deeply colored (λ_max∼570 nm) charge-transfer complexes 2a,b. Further functionalization of the calix[4]arene platform is reported for attachment to solid supports. Polymer-supported calixarene material 3 was prepared, which reversibly traps NO₂/N₂O₄ with the formation of nitrosonium storing polymer 4. Material 4 was effectively used for nitrosation of amides.     

p21Cip/WAF1 activation is an important factor for the ERK pathway dependent anti-proliferation of colorectal cancer cells

p21Cip/WAF1, an important regulator of cell proliferation, is induced by both p53- and extracellular signal regulated kinase (ERK) pathways. The induction of p21Cip/WAF1 occurs by prolonged activation of the ERKs caused by extracellular stimuli, such as zinc. However, not all the cells appeared to respond to ERK pathway dependent p21Cip/WAF1 induction. Here we investigated the cause of such difference using colorectal cancer cells. p21Cip/WAF1 induction and concomitant reduction of bromodeoxyuridine (BrdU) incorporation were observed by zinc treatment within HT-29 and DLD-1. However, HCT-116 cells with high endogenous p21Cip/WAF1 levels did not show any additional increment of p21Cip/WAF1 levels by zinc treatment and did maintain high BrdU incorporation level. The p21Cip/WAF1 induction by zinc depended upon prolonged activation of extracellular signal regulated kinase (ERK) was not observed in HCT-116 cells. The percentage of BrdU positive cells was 50% higher in p21Cip/WAF1 -/- HCT-116 cells compared to p21Cip/WAF1 +/+ HCT- 116 cells, and no cells induced p21Cip/WAF1 incorporated BrdU in its nucleus, yet confirming the importance of p21Cip/WAF1 induction in anti- proliferation. These results again support that p21Cip/WAF1 induction is a determinant in the regulation of colonic proliferation by the ERK pathway.     

Thermally produced biodegradable scaffolds for cartilage tissue engineering

A novel process was developed to fabricate biodegradable polymer scaffolds for tissue engineering applications, without using organic solvents. Solvent residues in scaffolds fabricated by processes involving organic solvents may damage cells transplanted onto the scaffolds or tissue near the transplantation site. Poly(L-lactic acid) (PLLA) powder and NaCl particles in a mold were compressed and subsequently heated at 180 degrees C (near the PLLA melting temperature) for 3 min. The heat treatment caused the polymer particles to fuse and form a continuous matrix containing entrapped NaCl particles. After dissolving the NaCl salts, which served as a porogen, porous biodegradable PLLA scaffolds were formed. The scaffold porosity and pore size were controlled by adjusting the NaCl/PLLA weight ratio and the NaCl particle size. The characteristics of the scaffolds were compared to those of scaffolds fabricated using a conventional solvent casting/particulate leaching (SC/PL) process, in terms of pore structure, pore-size distribution, and mechanical properties. A scanning electron microscopic examination showed highly interconnected and open pore structures in the scaffolds fabricated using the thermal process, whereas the SC/PL process yielded scaffolds with less interconnected and closed pore structures. Mercury intrusion porosimetry revealed that the thermally produced scaffolds had a much more uniform distribution of pore sizes than the SC/PL process. The utility of the thermally produced scaffolds was demonstrated by engineering cartilaginous tissues in vivo. In summary, the thermal process developed in this study yields tissue-engineering scaffolds with more favorable characteristics, with respect to, freedom from organic solvents, pore structure, and size distribution than the SC/PL process. Moreover, the thermal process could also be used to fabricate scaffolds from polymers that are insoluble in organic solvents, such as poly(glycolic acid). Cartilage tissue regenerated from thermally produced PLLA scaffold.     

Separation of carbon nanotubes by frit inlet asymmetrical flow field-flow fractionation

Flow field-flow fractionation (flow FFF), a separation technique for particles and macromolecules, has been used to separate carbon nanotubes (CNT). The carbon nanotube ropes that were purified from a raw carbon nanotube mixture by acidic reflux followed by cross-flow filtration using a hollow fiber module were cut into shorter lengths by sonication under a concentrated acid mixture. The cut carbon nanotubes were separated by using a modified flow FFF channel system, frit inlet asymmetrical flow FFF (FI AFIFFF) channel, which was useful in the continuous flow operation during injection and separation. Carbon nanotubes, before and after the cutting process, were clearly distinguished by their retention profiles. The narrow volume fractions of CNT collected during flow FFF runs were confirmed by field emission scanning electron microscopy and Raman spectroscopy. Experimentally, it was found that retention of carbon nanotubes in flow FFF was dependent on the use of surfactant for CNT dispersion and for the carrier solution in flow FFF. In this work, the use of flow FFF for the size differentiation of carbon nanotubes in the process of preparation or purification was demonstrated.