Y2SiO5:Tb phosphor particles prepared from colloidal and aqueous solutions by spray pyrolysis

Green-emitting Y₂SiO₅:Tb phosphor particles with fine size, spherical shape, filled morphology, high crystallinity, and good brightness were synthesized by a spray pyrolysis process. The effect of silicon precursor type on the morphology, crystal structure, crystallinity, and photoluminescence efficiency of Y₂SiO₅:Tb phosphor particles was investigated. The particles prepared from an artificial colloidal solution obtained by dispersing fumed silica particles had a pure monoclinic X2 crystalline phase, which is more appropriate for application to displays, after post-treatment at 1300 °C. On the other hand, the particles prepared from 100% tetraethyl orthosilicate (TEOS) reagent had an X2 phase and small amounts of X1 and impurity phases such as Y₂Si₂O₇ and Y_4.67Si₃O₁₃ due to the phase-segregation characteristics of the TEOS precursor. The photoluminescence characteristics of Y₂SiO₅:Tb phosphor particles were strongly affected by the silicon source used. The photoluminescence intensities increased with the fumed silica/TEOS ratio. The particles prepared from 100% fumed silica showed the maximum photoluminescence intensity, which is 22% higher than that of particles prepared from 100% TEOS. PACS 81.20.Rg; 78.55.Hx; 78.40.Ha; 81.05.Hd; 81.40.Tv     

Research on lenses assemble precision in complicate laser amplification system

In a certain amplification system, signal laser can be amplified from 1 nJ to 5 J. To realize a high quality imaging transfer, meet beam diameter expansion requirement, and get good filtering effects, three spatial filters are designed and assembled. Lenses in these spatial filters can be assembled and adjusted by their reflection spots to meet wave-front requirements. In this letter, we analyze precision of the assembling, and make a ray-tracing simulation to discuss the relation between assembling precision and lenses parameters. On the optimized distance of 1000 mm, adjusting precision of lens tilt can reach 5 mrad.     

Oscillation of coercivity between positive and negative in MnxGe1-x：H ferromagnetic semiconductor films

Amorphous MnxGe1-x :H ferromagnetic semiconductor films prepared in mixed Ar with 20% H2 by magnetron cosputtering show global ferromagnetism with positive coercivity at low temperatures. With increasing temperature, the coercivity of MnxGe1-x :H films first changes from positive to negative, and then back to positive again, which was not found in the corresponding MnxGe1-x and other ferromagnetic semiconductors before. For Mn0.4Ge0.6 :H film, the inverted Hall loop is also observed at 30 K, which is consistent with the negative coercivity. The negative coercivity is explained by the antiferromagnetic exchange coupling between the H-rich ferromagnetic regions separated by the H-poor non-ferromagnetic spacers. Hydrogenation is a useful method to tune the magnetic properties of MnxGe1-x films for the application in spintronics.     

Effect of magnetic field on the TC and magnetic properties for the aligned MnBi compound

In the compound MnBi, a first-order transition from the paramagnetic to the ferromagnetic state can be triggered by an applied magnetic field and the Curie temperature increases nearly linearly with an increase in magnetic field by ∼2 K/T. Under a field of 10 T, T_C increases by 20 and 22 K during heating and cooling, respectively. Under certain conditions a reversible magnetic field or temperature induced transition between the paramagnetic and ferromagnetic states can occur. A magnetic and crystallographic H-T phase diagram for MnBi is given. Magnetic properties of MnBi compound aligned in a Bi matrix have been investigated. In the low temperature phase MnBi, a spin-reorientation takes place during which the magnetic moments rotate from being parallel to the c-axis towards the basal plane at ∼90 K. A measuring Dc magnetic field applied parallel to the c-axis of MnBi suppresses partly the spin-reorientation transition. Interestingly, the fabricated magnetic field increases the temperature of spin-reorientation transition T_s and the change in magnetization for MnBi. For the sample solidified under 0.5 T, the change in magnetization is ∼70% and T_s is ∼91 K.     

Preparation of Fe–Si–B–Nb amorphous powder cores with excellent high-frequency magnetic properties

FeSiBNb amorphous powder cores were prepared with the amorphous powder by gas atomization and subsequent hot pressing of resulting powder after creating oxide layers on the amorphous powder. Fully amorphous FeSiBNb powders with good soft magnetic properties were successfully obtained in the particle size range below 100 μm. FeSiBNb amorphous powder cores exhibit stable permeability up to 10 MHz, showing excellent high-frequency characteristics.     

Use of Cu dopant and it's doping effects on polyaniline conducting system in water and tetrahydrofuran

The structural modification and properties of polymeric materials are of utmost importance in deciding their applications. In the present study, the synthesis of polyaniline (PANI) has been carried out via chemical oxidation in acidic medium by potassium-dichromate and the yield of synthesized polyaniline was found to be 75-80%. The copper per chlorate tetrabenzonitrile salt (CuClO₄·4BN) used for chemical doping in synthesized polyaniline is stable in organic solvent like acetonitrile (AN) and benzonitrile (BN). The effect of Cu⁺¹ oxidation state (dopant) in polyaniline has been characterized by FTIR. Electrical and dielectric measurements show the decrease in the intensity of the Cu⁺¹ salt signal and the appearance of a radical signal due to the formation of oxidative coupled in polymeric species. Electrical and dielectric properties of doped polyaniline samples show significant changes due to the effect of dopant (CuClO₄·4BN). It is observed that the conductivity is contributing both by formation of ionic complex and particularly dominated by electronic due to the mobility of charge carriers along the polyaniline chain.     

激光调Q CAI

从激光调Q速率方程出发,分析推导了激光调Q过程中,腔内光子数与工作物质内反转粒子数间的关系.再根据激光调Q的过程中,对腔Q值控制方式不同,将激光调Q技术分为:转镜调Q、声光调Q、电光调Q、饱和吸收调Q和脉冲透射式调Q.用C语言进行了激光调Q CAI软件的开发研制,获得了将文学、图形、动画和计算融为一体的,直观而生动地将调Q的理论和过程再现于屏幕的CAI课件.介绍了课件的内容、结构及其特点.     

Superconducting energy gap distribution in c-axis oriented MgB2 thin film from point contact study

We have analyzed about a hundred voltage-dependent differential resistance dV/dI(V) curves of metallic point contacts between c-axis-oriented MgB₂ thin film and Ag, which exhibit clear Andreev reflection features connected with the superconducting gap. About one half of the curves show the presence of a second larger gap. The histogram of the double gap distribution reveals distinct maxima at 2.4 and 7 meV, while curves with single-gap features result in a more broad maximum at 3.5 meV. The double-gap distribution is in qualitative agreement with the distribution of gap values over the Fermi surface calculated by H. J. Choi et al. (cond-mat/0111183). The data unequivocally show the presence of two gaps: Δ_S=2.45±0.15 meV and Δ_L=7.0±0.45 meV in MgB₂ with the gap ratio Δ_L/Δ_S=2.85±0.15. Our observations further prove a widely discussed multigap scenario for MgB₂, where two distinct gaps are seen in the clean limit, while a single averaged gap is present in the dirty one.     

离子交换富集-导数火焰原子吸收法测定自来水中Cu,Fe和Zn

本文研究了用 2 0 1× 7阳离子交换树脂对自来水中的微量元素进行交换富集 ,采用微量脉冲进样 导数火焰原子吸收法测定富集后溶液中的Cu ,Fe和Zn ,该方法灵敏度分别为 0 2 9,0 5 9和 0 0 6 μg·L- 1 ,精密度分别为 4 2 8% ,1 95 %和 2 2 8% ,检测限分别为 1 2 8,5 85和 0 6 8μg·L- 1 ,回收率分别为 91 13% ,10 1 34%和99 84 % ,本方法大大减少了需样量 ,简便快速 ,灵敏度高。     

N_2和O_2纯转动拉曼光谱(PRRS)的温度特性

计算了N2 和O2 的PRRS ,讨论了其温度特性。提出通过测量N2 和O2 的PRRS计算大气温度的方法。