Polymerization of methylmethacrylate with cetyl pyridinium bromide (CPB)-benzoyl peroxide (BZ2O2) combination as a redox initiator and with CPB as a lone photoinitiator

Polymerization of MMA was carried out in near-bulk and in fairly dilute solutions in DMF at 40° with (1) CPB-BZ₂O₂ combination as the redox initiator in the dark and (2) CPB as the sole photoinitiator in visible light. R_p was proportional to ([CPB] [BZ₂O₂])^0.18 for the redox polymerization and to [CPB]^0.35 for the photopolymerization both in near-bulk (10% DMF, v/v) and in high dilution (50% DMF, v/v). Polymerization was inhibited by hydroquinone in each case indicating a radical mechanism. Effect of several solvents/additives on the polymerization revealed that dimethyl formamide, acetonitrile and pyridine acted as rate enhancing solvents in the redox polymerization while in the photopolymerization they acted as normal diluents; benzene, methanol, acetone and chloroform exhibited inert nature while formamide and acetamide behaved as retarding additives in both types of polymerization. Initiator transfer of the degradative type reasonably explains kinetic nonidealities.     

Physical and dielectric properties of poly(vinylidene fluoride)/polybenzimidazole functionalized graphene nanocomposites

Polymer‐based nanocomposites with good dielectric behavior have engrossed research devotion because of their distinctive benefits in electronic applications. An in situ synthetic process for the polybenzimidazole functionalized graphene oxide (GBI) and its nanocomposite with poly(vinylidene fluoride) (PVDF) is described. GBI shows good dispersion in the bulk PVDF matrix implying a strong interaction of polybenzimidazole with PVDF as evident from morphological and FTIR studies. A gradual increment of GBI in PVDF increases its piezoelectric β‐polymorph formation with a maximum of 73% for 10 wt % GBI in PVDF (GBF10) which also exhibits highest thermal stability. An exhaustive study of frequency dependent electrical properties of GBF10 indicates significantly higher dielectric constant (61), low dielectric loss (0.42), and low AC conductivity value of 1.17 × 10^?10 S/cm at 100 Hz which are the key properties of a suitable capacitor. GBF10 also shows hydrophobic behavior (water uptake 2.89%) and low swelling ratio (1.143), providing an opportunity to use the composite film in fuel cell application. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 189–201     

Solvent-Dependent Nanostructures Based on Active π-Aggregation Induced Emission Enhancement of New Carbazole Derivatives of Triphenylacrylonitrile

In the present study, the carbazole and 2,3,3-triphenylacrylonitrile (TPAN) nanostructures (2-CTPAN and 2,2′-CTPAN) have been designed and synthesized by Pd-catalyzed Sonogashira cross-coupling reaction. CTPAN exhibit aggregation-induced emission enhancement (AIEE) behavior in water with high fluorescence quantum yield. Both the compounds show tunable self-assembly in water as well as in N,N-dimethylformamide (DMF) by extended π–π stacking interactions. CTPAN can be self-assembled into spherical particles in water and the structures of these self-assemblies have been investigated using X-ray diffraction. Interestingly, 2-CTPAN and 2,2′-CTPAN form organogels with a critical gelation concentration (CGC) of 11 and 15 mg mL⁻¹, respectively, in DMF and exhibit acicular and rod shaped morphology, respectively. The single-crystal structure of 2-CTPAN shows that the intermolecular C−H⋅⋅⋅π interactions lock the molecular conformation into a staircase-shaped supramolecular assembly. These AIEE active compounds reveal high water dispersibility, strong yellow fluorescence with high quantum yield, promising photostability and excellent biocompatibility, which make them potential bioimaging agents.     

Biocatalytic Synthesis of Two-Photon Active Resveratrol Oligomer

Resveratrol (3,5,4′ trihydroxy trans-stilbene) is a plant based phenolic compound. Enzymatic oligomerization of trans-resveratrol using horseradish peroxidase followed by characterization of the oligomer is presented. The oligomerization reaction was monitored using UV-Visible absorption and fluorescence spectroscopies. The oligomer exhibits strong two-photon-induced fluorescence. Computational modeling using spin-density calculations was performed to investigate the most probable reaction sites and the nature of products formed in the oligomerization process.     

An environment-friendly methodology for the construction of diversified bicycloacenaphtho[1,2-d]imidazole-8-thione scaffolds using spinel NiFe2O4 nanoparticles as a sustainable catalyst

Molecular Diversity - Herein, we successfully developed an easy access to bicycloacenaphtho[1,2-d]imidazole-8-thione by one-pot three-component MCRs of acenaphthoquinone, aryl or alkyl...     

Isoreticular Expansion of Metal–Organic Frameworks via Pillaring of Metal Templated Tunable Building Layers: Hydrogen Storage and Selective CO2 Capture

The deliberate construction of isoreticular eea-metal–organic frameworks (MOFs) ( Cu-eea-1 , Cu-eea-2 and Cu-eea-3 ) and rtl-MOFs ( Co-rtl-1 and Co-rtl-2 ) has been accomplished based on the ligand-to-axial pillaring of supermolecular building layers. The use of different metal ions resulted in two types of supermolecular building layers (SBLs): Kagome (kgm) and square lattices (sql) which further interconnect to form anticipated 3D-MOFs. The isoreticular expansion of (3,6)-connected Cu-MOFs has been achieved with desired eea-topology based on kgm building layers. In addition, two (3,6)-connected Co-rtl-MOFs were also successfully constructed based on sql building layers. The Cu-eea-MOFs were shown to act as hydrogen storage materials with appreciable amount of hydrogen uptake abilities. Moreover Cu-eea-MOFs have also exhibited remarkable CO₂ capture ability at ambient condition compared to nitrogen and methane, due to the presence of amide functionalities.     

Alkyl Chain Length- and Polymorph-Dependent Photomechanochromic Fluorescence of Anthracene Photodimerization in Molecular Crystals: Role of the Lattice Stiffness

Anthracene–pentiptycene hybrid systems 1-Cn , where n refers to the number of carbon atoms in the linear alkyl chain, crystallize in three different polymorphs, denoted Y (yellow), G (green), and B (blue) forms in terms of the fluorescence color. While all Y-form crystals show the same yellow-to-blue fluorescence color response to the photomechanical stress generated by the anthracene [4+4] photodimerization reaction, the four G forms exhibit distinct photomechanofluorochromism (PMFC): from green to blue for G-1-C4 , to orange for G-1-C7 , to red for G-1-C8 , and to red then blue for G-1-C9 , and the B forms show no photochromic activity. The intriguing RGB three-color PMFC and abnormal topochemical reactivity of G-1-C9 are attributed to inherent softness of the crystal lattice.     

Diastereoselectivity is in the Details: Minor Changes Yield Major Improvements to the Synthesis of Bedaquiline**

Bedaquiline is a crucial medicine in the global fight against tuberculosis, yet its high price places it out of reach for many patients. Herein, we describe improvements to the key industrial lithiation-addition sequence that enable a higher yielding and therefore more economical synthesis of bedaquiline. Prioritization of mechanistic understanding and multi-lab reproducibility led to optimized reaction conditions that feature an unusual base-salt pairing and afford a doubling of the yield of racemic bedaquiline. We anticipate that implementation of these improvements on manufacturing scale will be facile, thereby substantially increasing the accessibility of this essential medication.     

Regio- and stereoselective synthesis of aziridino epoxides from cyclic dienes

Two different routes for the regio- and stereoselective synthesis of aziridino epoxides from cyclic dienes have been explored. The first strategy involves regiospecific aziridination of cyclic diene derivatives and subsequent epoxidation with m-CPBA to yield cis-aziridino epoxides as major products. The second strategy utilizes regiospecific epoxidation of cyclic diene derivatives followed by Sharpless aziridination to provide exclusively trans-aziridino epoxides. Synthesis of both enantiomers of cis-aziridino epoxides from (R)-(-)- and (S)-(+)-carvones are also reported.     

Effect of ring fusion stereochemistry on double bond geometry. Unexpected formation of nine-membered cyclic ether with E-configurated double bond through RCM

Formation of a nine-membered cyclic ether with E-configurated double bond was observed during construction of 5-9-5 tricycles through RCM of dienes. Ring fusion stereochemistry in the products oxonenes was found to have profound influence on the olefin geometry. cis-anti-cis 5-9-5 tricycle was obtained with Z-configurated olefin while cis-syn-cis 5-9-5 system was obtained with E- as well as Z-configurated double bond with the former predominating.