Brief survey on phytochemicals to prevent COVID-19

BackgroundThe recent pandemic by COVID-19 is a global threat to human health. The disease is caused by SARS-CoV-2 and the infection rate is increased more quickly than MERS and SARS as their rapid adaptation to varied climatic conditions through rapid mutations. It becomes more severe due to the lack of proper therapeutic drugs, insufficient diagnostic tool, scarcity of appropriate drug, life supporting medical facility and mostly lack of awareness. Therefore, preventive measure is one of the important strategies to control. In this context, herbal medicinal plants received a noticeable attention to treat COVID-19 in Indian subcontinent. Here, 44 Indian traditional plants have been discussed with their novel phytochemicals that prevent the novel corona virus. The basic of SARS-CoV-2, their common way of transmission including their effect on immune and nervous system have been discussed. We have analysed their mechanism of action against COVID-19 following in-silico analysis. Their probable mechanism and therapeutic approaches behind the activity of phytochemicals to stimulate immune response as well as inhibition of viral multiplication discussed rationally. Thus, mixtures of active secondary metabolites/phytochemicals are the only choice to prevent the disease in countries where vaccination will take long time due to overcrowded population density.     

Effects of Dielectric Barrier Discharge Plasma on Physicochemical Characteristics,Mechanical Properties and Biocompatibility of Silk/PVA Nanofibers

Plasma Chemistry and Plasma Processing - This work reports an investigation of the discharge characteristics of atmospheric dielectric barrier discharge (DBD) plasma in terms of I-V curves and...     

Effect of spin–orbit coupling on spin transport at graphene/transition metal interface

In spite of large spin coherence length in graphene due to small spin–orbit coupling, the created potential barrier and antiferromagnetic coupling at graphene/transition metal (TM) contacts strongly reduce the spin transport behavior in graphene. Keeping these critical issues in mind in the present work, ferromagnetic (Co, Ni) nanosheets are grown on graphene surface to elucidate the nature of interaction at the graphene/ferromagnetic interface to improve the spin transistor characteristics. Temperature dependent magnetoconductance shows unusual behavior exhibiting giant enhancement in magnetoconductance with increasing temperature. A model based on spin–orbit coupling operated at the graphene/TM interface is proposed to explain this anomalous result. We believe that the device performance can be improved remarkably tuning the spin–orbit coupling at the interface of graphene based spin transistor. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

(Quasi‐)Racemic X‐ray Structures of Glycosylated and Non‐Glycosylated Forms of the Chemokine Ser‐CCL1 Prepared by Total Chemical Synthesis

Our goal was to obtain the X‐ray crystal structure of the glycosylated chemokine Ser‐CCL1. Glycoproteins can be hard to crystallize because of the heterogeneity of the oligosaccharide (glycan) moiety. We used glycosylated Ser‐CCL1 that had been prepared by total chemical synthesis as a homogeneous compound containing an N‐linked asialo biantennary nonasaccharide glycan moiety of defined covalent structure. Facile crystal formation occurred from a quasi‐racemic mixture consisting of glycosylated L ‐protein and non‐glycosylated‐D ‐protein, while no crystals were obtained from the glycosylated L ‐protein alone. The structure was solved at a resolution of 2.6–2.1 Å. However, the glycan moiety was disordered: only the N‐linked GlcNAc sugar was well‐defined in the electron density map. A racemic mixture of the protein enantiomers L ‐Ser‐CCL1 and D ‐Ser‐CCL1 was also crystallized, and the structure of the true racemate was solved at a resolution of 2.7–2.15 Å. Superimposition of the structures of the protein moieties of L ‐Ser‐CCL1 and glycosylated‐L ‐Ser‐CCL1 revealed there was no significant alteration of the protein structure by N‐glycosylation.     

Dispersion of T1 and T2 Nuclear Magnetic Resonance Relaxation in Crude Oils

Crude oils, which are complex mixtures of hydrocarbons, can be characterized by nuclear magnetic resonace diffusion and relaxation methods to yield physical properties and chemical compositions. In particular, the field dependence, or dispersion, of T₁ relaxation can be used to investigate the presence and dynamics of asphaltenes, the large molecules primarily responsible for the high viscosity in heavy crudes. However, the T₂ relaxation dispersion of crude oils, which provides additional insight when measured alongside T₁, has yet to be investigated systematically. Here we present the field dependence of T₁‐T₂ correlations of several crude oils with disparate densities. While asphaltene and resin‐containing crude oils exhibit significant T₁ dispersion, minimal T₂ dispersion is seen in all oils. This contrasting behavior between T₁ and T₂ cannot result from random molecular motions, and thus, we attribute our dispersion results to highly correlated molecular dynamics in asphaltene‐containing crude oils.     

Efficient Chemical Protein Synthesis using Fmoc-Masked N-Terminal Cysteine in Peptide Thioester Segments

We report an operationally simple method to facilitate chemical protein synthesis by fully convergent and one-pot native chemical ligations utilizing the fluorenylmethyloxycarbonyl (Fmoc) moiety as an N-masking group of the N-terminal cysteine of the middle peptide thioester segment(s). The Fmoc group is stable to the harsh oxidative conditions frequently used to generate peptide thioesters from peptide hydrazide or o-aminoanilide. The ready availability of Fmoc-Cys(Trt)-OH, which is routinely used in Fmoc solid-phase peptide synthesis, where the Fmoc group is pre-installed on cysteine residue, minimizes additional steps required for the temporary protection of the N-terminal cysteinyl peptides. The Fmoc group is readily removed after ligation by short exposure (<7 min) to 20 % piperidine at pH 11 in aqueous conditions at room temperature. Subsequent native chemical ligation reactions can be performed in presence of piperidine in the same solution at pH 7.     

para-Selective Arylation of Arenes: A Direct Route to Biaryls by Norbornene Relay Palladation

Biaryl compounds are extremely important structural motifs in natural products, biologically active components and pharmaceuticals. Selective synthesis of biaryls by distinguishing the subtle reactivity difference of distal arene C−H bonds are significantly challenging. Herein, we describe para-selective C−H arylation, which is acheived by a unique combination of a meta-directing group and norbornene as a transient mediator. Upon direct meta-C−H palladation, one-bond relay palladation occurs in presence of norbornene and subsequently para-C−H arylation is achieved for sulfonates, phosphonates and phenols bearing 2,6-disubstitution patterns. The protocol is amenable to electron-deficient aryl iodides. Multisubstituted arenes and phenols are obtained by postsynthetic modification of the products. The protocol allows the synthesis of hexa-substituted benzene by sequential selective distal C−H functionalization.     

Stereoselective synthesis of trans-3-functionalized-4-pyrazolo[5,1-b]thiazole-3-carboxylate substituted β-lactams: Potential synthons for diverse biologically active agents

Abstract

An efficient protocol for the stereoselective synthesis of pyrazolo[5,1-b]thiazole-3-carboxylate tethered β-lactam conjugates 8a–j from novel pyrazolo [5,1-b]thiazole-3-carboxylate substituted Schiff’s bases 6a–f is reported here. The reaction between various ketene precursors and novel Schiff’s bases 6a–f afforded exclusive formation of trans-β-lactams 8a–j. The substrate scope of this approach was investigated extensively by varying different groups (R, Z). All the novel compounds were characterized using various spectroscopic techniques, such as FT-IR, ¹H NMR, ¹³C NMR, elemental analysis, ¹³C NMR (DEPT-135), and mass spectrometry in representative cases. Single crystal X-ray crystallographic study of trans-ethyl 7-(1-(4-methoxyphenyl)-4-oxo-3-phenoxyazetidin-2-yl)-6-methyl-2-(methylthio)pyrazolo[5,1-b]thiazole-3-carboxylate 8a has confirmed the molecular structure and the stereochemical outcome. To the best of our knowledge, the synthesis of such types of Schiff’s bases and β-lactam conjugates has not been reported so far.     

Aromatic Foldamer Helices as α-Helix Extended Surface Mimetics

Helically folded aromatic oligoamide foldamers have a size and geometrical parameters very distinct from those of α-helices and are not obvious candidates for α-helix mimicry. Nevertheless, they offer multiple sites for attaching side chains. It was found that some arrays of side chains at the surface of an aromatic helix make it possible to mimic extended α-helical surfaces. Synthetic methods were developed to produce quinoline monomers suitably functionalized for solid phase synthesis. A dodecamer was prepared. Its crystal structure validated the initial design and showed helix bundling involving the α-helix-like interface. These results open up new uses of aromatic helices to recognize protein surfaces and to program helix bundling in water.     

Aromaticity of N-heterocyclic carbene and its analogues: Magnetically induced ring current perspective

The N-heterocyclic carbene, imidazole-2-ylidene, and its main group (13-15) analogues contain cyclically conjugated 6π electrons. Experimental ¹H nuclear magnetic resonance (NMR) spectra suggest an increase in aromaticity along a period from left to right. Whereas the order along a group is as follows: period 2 > period 5 > period 4 > period 3 due to change in structure. To understand the order of aromaticity, the magnetically induced ring currents of the molecules are calculated using aromatic ring current shielding, gauge-including magnetically induced currents (GIMIC) method and Stanger's σ-model applying the gauge-including atomic orbitals NMR technique. It is found that GIMIC best describes the order of aromaticity especially along a group where current-profile changes on the bivalent atom down a group due to change in electron density. Moreover, the GIMIC provides the visualization of current by sign modulus and the anisotropy of the induced current density plots.