Design of Coaxial Couplers for High Efficiency Helix TWT

The main objective of the paper is to make an efficient design of the input and output coaxial coupler for a helix TWTs. An approach has been developed for the efficient design and analysis of the coaxial couplers in the practical situation. Normally multi-section impedance transformer approach is used for any wide band coupler. For a space helix TWT, coupler should be wide bandwidth and small size. In this case coupler is matched with helix slow wave structure and the standard 50-ohm connectors. The simulated return loss (dB) profile for different type of couplers is obtained by using Ansoft HFSS, CST microwave studio and compares those with experimental results. The tip loss design at sever ends for the input and the output section has been also optimized.     

Arc plasma synthesized LaB<Subscript>6</Subscript> nanocrystallite film on various substrates as a field emitter

Lanthanum hexaboride (LaB₆) nanocrystallites/nanowires have been successfully synthesized using gas phase condensation in arc plasma. Our results show that the LaB₆ nanowires have ~20 nm diameter and length of several micrometers. The as-synthesized LaB₆ nanocrystallites and nanowires are crystalline in nature. Field emission studies were carried out on as synthesized LaB₆ nano-powder deposited on W and Re tips and foils, and also on Si foil substrates under ultra high vacuum. The Fowler–Nordheim plots obtained from the current–voltage characteristics are found to be linear in accordance with the quantum mechanical tunneling phenomenon. High value of field enhancement factor (8177) is observed for LaB₆ on Re substrate, indicating that the electron emission is from the nanometric features of the LaB₆. Our results show that the arc plasma synthesized LaB₆ nanocrystalline film exhibits good emission stability as emitter without severe deviations from the initial set value and also a strong ability to withstand the ion bombardment, which is useful for low operation voltage vacuum micro/nano electronic devices.     

Non-static electromagnetic fields in general relativity. IV

An investigation is made of Rainich's ‘already unified field theory’ from the standpoint of continuous groups of motions, and a solution is obtained for the case where the electromagnetic field is non-static and the space-time admits a three-parameter continuous group of motions whose minimum invariant varieties are three-dimensional spaces. There exists a divergence-free electromagnetic field for values of t at which the metric is not singular.     

Facile-chelating amine-assisted synthesis of β-In<Subscript>2</Subscript>S<Subscript>3</Subscript> nanostructures from a new single-source precursor derived from <Emphasis Type="Italic">S</Emphasis>-methyl dithiocarbazate

Flake-built 3D β-In₂S₃ nanostructures were synthesized by thermolysis of S-methyl dithiocarbazate–indium(III) complex precursor in hexamethylenediamine (HMDA). XRD patterns showed that the cubic phase of 3D β-In₂S₃ remained unchanged but the crystallinity was increased after annealing at 400 °C for 20 min. The products were also characterized by SEM, TEM, and EDS. Based on the experimental results, we propose that the growth of 3D nanostructures is controlled by the stability of the intermediate chelate complex made by indium(III) and solvent. The optical properties of the 3D β-In₂S₃ nanostructures were also investigated by UV–Vis and PL spectroscopy, which indicated strong quantum confinement effect.     

Unveiling the binding interaction of zinc (II) complexes of homologous Schiff-base ligands on the surface of BSA protein: A combined experimental and theoretical approach

Four new zinc (II) complexes [Zn (HL¹H)Br₂] (1), [Zn (HL¹H)Cl₂] (2), [Zn₂(HL²)Br₃] (3), and [Zn (HL²)Cl] (4) have been synthesized by adopting template synthetic strategy and utilizing two homologous Schiff base ligands (H₂L¹ = 4-bromo-2-{[2-(2-hydroxyethylamino)-ethylimino]-methyl}-6-methoxyphenol, H₂L² = 4-bromo-2-{[3-(2-hydroxyethylamino)propylimino]methyl}-6-methoxyphenol), differing in one -CH₂- unit in the ligating backbone, by adopting template synthetic strategy. All the complexes have been characterized by single crystal X-ray diffraction analysis as well as by other routine physicochemical techniques. Ligand mediated structural variations have been observed and rationalized by density functional theoretical (DFT) calculations. Interaction of the complexes 1–4 with Bovine Serum Albumin protein (BSA) has been studied by different spectroscopic techniques. A complete thermodynamic profile (ΔH^o, ΔS^o and ΔG^o) was evaluated initially from the change in absorption and fluorescence spectra upon addition of BSA to the complexes. Appreciable binding constant values in the range ~ 0.94–4.51 × 10⁴ M⁻¹ indicate efficient binding tendency of the complexes to BSA with the sequence 1 ≅ 2 > 3 ≅ 4. Circular dichroism (CD), isothermal calorimetric titration experiments, molecular docking and molecular dynamics have been performed to gain deep insight into the binding regions of complex 1 to BSA. Experimental evidences suggest an interaction of zinc complexes at the surface of BSA protein and this particular binding has been exploited to determine unknown concentration of BSA protein. For this purpose complex 1 was explored as a BSA protein quantification tool.     

Studies on CdS nanoparticles dispersed in silica matrix prepared by sol-gel technique

SiO₂/CdS-nanoparticle composite films (SiO₂:CdS=85:15, 80:20, 75:25 and 70:30) were prepared by the sol-gel route. The films were characterized by studying microstructural (XRD and TEM) and optical (transmittance and photoluminescence) properties. Band gaps of these films annealed at different temperatures (373-473 K) for different times (10-120 min) indicated that the signature of nanocrystallinity is retained throughout the range of our experimental conditions. A thermal diffusion process controlled growth in the crystallite size with increasing annealing time and temperature. The average radii of the nanoparticles varied as the cube root of the annealing time but showed exponential dependence on the inverse of annealing temperature. Photoluminescence (PL) studies of the composite films indicated excitonic transitions. Theoretical analysis of the line shapes of the PL peaks recorded at 300 K and 80 K could be accounted for by the combined effects of size distribution and phonon broadening. It was observed that the deformation potential (E _d) effectively controlled the line shapes of the PL measurements. Received 24 May 2002 Published online 27 January 2003 RID="a" ID="a"e-mail: msakp@mahendra.iacs.res.in     

The solution behavior of poly(vinylpyrrolidone): its clouding in salt solution, solvation by water and isopropanol, and interaction with sodium dodecyl sulfate

This article deals with the solution properties of poly(vinylpyrrolidone) (PVP) in salt and surfactant environment. The cloud point (CP) of PVP has been found to be induced by the salts NaCl, KCl, KBr, Na2SO4, MgSO4, and Na3PO4. On the basis of CP values for a salt at different [PVP], the energetics of the clouding process have been estimated. The effect of the surfactant, sodium dodecyl sulfate (SDS), on the salt-induced CP has also been studied, and reduction in CP at low [SDS] and increase in CP at high [SDS] have been observed. The water vapor adsorption of PVP has been determined by isopiestic method. The results display a BET Type III isotherm whose analysis has helped to obtain the monolayer capacity of PVP and formation of multilayer on it. The solvation of PVP in a solution of water and a water-isopropanol mixture has been determined by conductometry from which contribution of the individual components were estimated. The interaction of PVP with SDS in solution led to formation of a complex entity, which has been studied also by conductometry adopting a binding-equilibrium scheme. SDS has been found to undergo two types of binding as monomers in the pre- critical aggregation concentration (CAC) range and as small clusters in the post CAC region. The stoichiometries of binding and binding constant were evaluated.     

Excited State Intramolecular Proton Transfer in Methyl and Methoxy Substituted Salicylic Acid

The excited state intramolecular proton transfer (ESIPT) processes in 3‐methylsalicyclic acid (3‐MeSA) and 3‐methoxysalicyclic acid (3‐MeOSA) have been investigated in cyclohexane medium by emission spectroscopic techniques. The ESIPT process was characterized in 3‐MeSA from the large Stokes fluorescent band (455 nm), but it was suppressed by 3‐MeOSA in cyclohexane. The ESIPT process was found to be accelerated both in 3‐MeSA and 3‐MeOSA in the presence of a hydrogen bond accepting agent, triethylamine (TEA). Further, theoretical calculations were carried out at the ground and excited states to complement the experimental evidences.     

Anchoring of copper complex in MCM-41 matrix: a highly efficient catalyst for epoxidation of olefins by tert-BuOOH

A complex moiety containing copper (II) has been anchored covalently into the organic-modified Si-MCM-41 to prepare a new catalyst. The amine group containing organic moiety 3-aminopropyl-triethoxysilane has been first anchored on the surface of Si-MCM-41 via silicon alkoxide route. The amine group upon condensation with salicyldehyde affords a bidentate ligand in the mesoporous matrix for anchoring copper(II) ions. The prepared catalyst has been characterized by UV-vis, electron paramagnetic resonance (EPR), and infrared (IR) spectroscopic analysis, small-angle X-ray diffraction, and N2 sorption study. A remarkable difference in the pore structure has been observed after the immobilization of copper(II) complex in Si-MCM-41. The catalyst showed excellent catalytic efficiency in epoxidation reactions with various olefinic compounds including styrene and allyl alcohol, using tert-BuOOH as oxidant. Notably, styrene shows unprecedented high conversion (97%) as well as epoxide selectivity (89%) with tert-BuOOH over the Cu-MCM-41 catalyst.     

Synthesis of the anti-influenza agent (-)-oseltamivir free base and (-)-methyl 3-epi-shikimate

A new enantioselective synthesis of the anti-influenza agent (-)-oseltamivir free base (7.1% overall yield; 98% ee) and (-)-methyl 3-epi-shikimate (16% overall yield; 98% ee) has been described from readily available raw materials. Sharpless asymmetric epoxidation and diastereoselective Barbier allylation of an aldehyde are the key reactions employed in the incorporation of chirality, while the cyclohexene carboxylic ester core was constructed through a ring closing metathesis reaction.