Synthesis of 2-(ethynyloxy)naphthaene-1-carbaldehyde using 2-hydroxy benzyl alcohol and propargyl bromide in aqueous micellar media

Research on Chemical Intermediates - A highly convenient method has been developed for the synthesis of 2-(ethynyloxy) napthaene-1-carbaldehyde and its derivatives. Substituted naphthalene...     

Differentiation of diastereomeric conduramine derivatives under electron ionization and chemical ionization mass spectral conditions

Diastereomeric conduramine derivatives, i.e., (1R,2S,3R/S,6S)-6-(N-carbomethoxyamino) 1,2-O-isopropylidenecyclohex-4-ene-1,2,3-triol (1 and 2) and their O-acetyl derivatives (3 and 4), were studied using gas chromatography (GC) with electron ionization (EI) and chemical ionization (CI). The EI mass spectra of diastereomeric pairs show consistent differences in the relative abundances of characteristic ions. The EI fragmentation patterns are based on precursor/product ion spectra, high-resolution mass spectrometry (HRMS) and deuterium labelling. The CI spectra show differences from the EI spectra, and the isobutane/CI spectra are much simpler than the methane/CI spectra. The differences shown in the CI spectra are similar to those shown in the product ion spectra of [M+H](+) ions generated under electrospray ionization (ESI) conditions. Theoretical calculations are performed to understand the observed differences. The differences in the relative stabilities of molecular ions, or protonated molecules at different sites, can explain the observed differences in the spectra.     

Nine compounds containing high‐nuclearity [CunX2n+2]2− (n = 4, 5 or 7; X = Cl or Br) quasi‐planar oligomers

The structures of seven A₂Cu₄X₁₀ compounds containing quasi‐planar oligomers are reported: bis(1,2,4‐trimethylpyridinium) hexa‐μ‐chlorido‐tetrachloridotetracuprate(II), (C₈H₁₂N)₂[Cu₄Cl₁₀], (I), and the hexa‐μ‐bromido‐tetrabromidotetracuprate(II) salts of 1,2,4‐trimethylpyridinium, (C₈H₁₂N)₂[Cu₄Br₁₀], (II), 3,4‐dimethylpyridinium, (C₇H₁₀N)₂[Cu₄Br₁₀], (III), 2,3‐dimethylpyridinium, (C₇H₁₀N)₂[Cu₄Br₁₀], (IV), 1‐methylpyridinium, (C₆H₈N)₂[Cu₄Br₁₀], (V), trimethylphenylammonium, (C₉H₁₄N)₂[Cu₄Br₁₀], (VI), and 2,4‐dimethylpyridinium, (C₇H₁₀N)₂[Cu₄Br₁₀], (VII). The first four are isomorphous and contain stacks of tetracopper oligomers aggregated through semicoordinate Cu...X bond formation in a 4(,) stacking pattern. The 1‐methylpyridinium salt also contains oligomers stacked in a 4(,) pattern, but is isomorphous with the known chloride analog instead. The trimethylphenylammonium salt contains stacks of oligomers arranged in a 4(,) stacking pattern similar to the tetramethylphosphonium analog. These six structures feature inversion‐related organic cation pairs and hybrid oligomer/organic cation layers derived from the parent CuX₂ structure. The 2,4‐dimethylpyridinium salt is isomorphous with the known (2‐amino‐4‐methylpyridinium)₂Cu₄Cl₁₀ structure, in which isolated stacks of organic cations and of oligomers in a 4(,) pattern are found. In bis(3‐chloro‐1‐methylpyridinium) octa‐μ‐bromido‐tetrabromidopentacuprate(II), (C₆H₇ClN)[Cu₅Br₁₂], (VIII), containing the first reported fully halogenated quasi‐planar pentacopper oligomer, the oligomers stack in a 5(,) stacking pattern as the highest nuclearity [Cu_nX_2n+2]²⁻ oligomer compound known with isolated stacking. Bis(2‐chloro‐1‐methylpyridinium) dodeca‐μ‐bromido‐tetrabromidoheptacuprate(II), (C₆H₇ClN)₂[Cu₇Br₁₆], (IX), contains the second heptacopper oligomer reported and consists of layers of interleaved oligomer stacks with a 7[(,)][(−,−)] pattern isomorphous with that of the known 1,2‐dimethylpyridinium analog. All the oligomers reported here are inversion symmetric.     

Steady-state and time-resolved studies of 2,7-carbazole-based conjugated polymers in solution and as thin films: determination of their solid state fluorescence quantum efficiencies

The UV–Vis absorption spectra and the luminescence properties of poly(N-octyl-2,7-carbazole) (POC) and poly(N-octyl-2,7-carbazole-alt-9,9-dioctyl-2,7-fluorene) PCF have been investigated in solution and in the solid state (thin films). No aggregate and/or excimer formation has been detected in these polymeric systems. From time-resolved fluorescence measurements in solution and in the solid state, the fluorescence efficiencies of the thin films have been estimated. It is found that the fluorescence efficiencies of these polycarbazoles in the solid state are quenched, as compared to those measured in fluid solutions, but remain relatively high (φ_F0.40), making them promising materials for electroluminescent devices.     

Molecular design of corrole‐based D‐π‐A sensitizers for dye‐sensitized solar cell applications

First principles calculations based on density functional theory (DFT) have been performed to design a new set of donor‐corrole‐bridge‐acceptor type systems based on the gallium corroles for dye‐sensitized solar cell applications. The design strategy for these systems is based on the benchmark studies done on the experimentally tested aluminum, gallium, and tin metallocorroles. Unfortunately, corrole analogues display poor light to current conversion efficiencies in spite of their desirable photophysical properties. Thus, improving the efficiency of corrole analogues has become a major challenge and ways to identify solutions to this is of outstanding fundamental importance. This study shows the lack of charge directionality toward anchoring group as plausible reason for the poor efficiencies of reported corrole systems, which enabled us to fine‐tune the electronic and optical properties of new D‐π‐A type systems, COR1‐COR4. The molecular geometries, electronic structure, and binding orientation of these systems on TiO₂ surface were investigated using DFT, TD‐DFT, and PBC methods. When compared with the reported corroles, COR1‐COR4 have a smaller band gaps, red‐shifted absorption spectra with higher extinction coefficients (10⁵ M^?1 cm^?1) and improved nonlinear optical properties. Importantly, results revealed that these dyes bind with two‐arm mode to TiO₂ surface and the density of states of the dye@TiO₂ elucidate strong coupling between the dyes and TiO₂ surface. We anticipate that the unique photophysical properties of these sensitizers will trigger the experimental efforts to yield a new generation of sensitizers based on corrole macrocyle. © 2015 Wiley Periodicals, Inc.     

Review of the aldol reaction

Aldol condensation is an important synthetic method widely used in organic synthesis. Development of catalytic methods that avoids the production of stoichiometric by-products while maintaining high levels of control available from stoichiometric processes provides an atom-economical alternative for these important transformations. Indeed, numerous catalysts for the aldol reaction have been reported in recent years, including enzymes, catalytic antibodies, organometals, organocatalysts, and small molecules. The direct aldol reaction is the most important reaction employed by synthetic chemists and is common in nature. Recently, various Lewis acids have been examined as catalysts for aldol reactions, but aldol condensation in a micellar medium has not been studied in detail so far. Because of stronger environmental concerns, organic reactions in green media, especially in water, have attracted more attention. It is believed that micelles act as nano reactors to enhance the reaction rates and give very good to excellent yields of end products.     

Differentiation of diastereomeric N-aryltetrahydropyrano/tetrahydrofuranochromenylamines under electron ionization and chemical ionization conditions

A series of diastereomeric 4S,5S,6R/S-tetrahydropyrano- and 3S,4S,5R/S-tetrahydrofuranochromenylamine derivatives (a/b isomers; 1-26) has been studied under electron ionization (EI) and chemical ionization (CI) conditions. The EI mass spectra of all diastereomeric compounds show two characteristic fragment ions, of which one is formed by retro-Diels-Alder (RDA) reaction from the molecular ion, retaining the charge on the diene fragment, and the other [M-(HNAr)]+ ion by a simple radical loss. The RDA process is more favorable in all b isomers, whereas the radical loss is dominant in all a isomers; based on these two ions it is easy to differentiate the two diastereomers. The collision-induced dissociation (CID) spectra of all the molecular ions also show the same trend, which reflects the stereoselectivity in the formation of the two characteristic fragment ions. The results of theoretical calculations performed are in accordance with the experimental observations. The CI experiments (methane and isobutane) on all the diastereomeric compounds also enabled the differentiation of the isomers.     

Initial excited-state structural dynamics of thymine are coincident with the expected photochemical dynamics

To explore the excited-state structural dynamics of thymine, a DNA nucleobase, we measured the resonance Raman spectra of thymine in aqueous solution at wavelengths throughout the lowest-energy absorption band. Self-consistent analysis of the resulting resonance Raman excitation profiles and absorption spectrum using a time-dependent wave packet formalism yielded the excited-state structural dynamics. The photochemically relevant C=C stretching and C-H deformation vibrational modes were found to exhibit maximum resonance Raman intensity and structural change upon photoexcitation for thymine, suggesting that the initial dynamics of thymine lie along the photochemical reaction coordinate.