Studies of magnetite nanoparticles synthesized by thermal decomposition of iron (III) acetylacetonate in tri(ethylene glycol)

In this paper, water-soluble magnetite nanoparticles have been directly synthesized by thermal decomposition of iron (III) acetylacetonate, Fe(acac)₃ in tri(ethyleneglycol). Size and morphology of the nanoparticles are determined by transmission electron microscopy (TEM) and dynamic light scattering (DLS) measurements while the crystal structure is identified using X-ray diffraction (XRD). Surface charge and surface coating of the nanoparticles are recognized using Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectra (XPS) and zeta potential measurements. Magnetic properties are determined using vibrating sample magnetometer (VSM) and superconducting quantum interference device (SQUID) measurements. The results show that as-prepared magnetite nanoparticles are relatively monodisperse, single crystalline and superparamagnetic in nature with the blocking temperature at around 100 K. The magnetite nanoparticles are found to be highly soluble in water due to steric and electrostatic interactions between the particles arising by the surface adsorbed tri(ethyleneglycol) molecules and associated positive charges, respectively. Cytotoxicity studies on human cervical (SiHa), mouse melanoma (B16F10) and mouse primary fibroblast cells demonstrate that up to a dose of 80 μg/ml, the magnetic nanoparticles are nontoxic to the cells. Specific absorption rate (SAR) value has been calculated to be 885 and 539 W/gm for samples with the iron concentration of 1 and 0.5 mg/ml, respectively. The high SAR value upon exposure to 20 MHz radiofrequency signifies the applicability of as-prepared magnetite nanoparticles for a feasible magnetic hyperthermia treatment.     

Basic alumina supported one-pot synthesis of structurally diverse pyridine/quinolinine-fused novel diazepanium, diazocanium, imidazodilinium and tetrahydro-pyrimidiniums

Basic alumina supported solvent-free one-pot synthesis of pyridine-fused polycyclic diazepaniums was achieved under microwave irradiation. The process was successfully extended to the synthesis of pyridine-fused bicyclic imidazolidiniums and tetrahydro-pyrimidiniums and also of tri- and tetracyclic diaza-heterocycle-fused quinoliniums. The dual characteristic of basic alumina, a solid support as well as a base, was successfully employed in the current investigation. The method emerged to be an effective route in terms of product yield, reaction time, and ease of purification and most importantly for environment friendly protocols.     

Monoclinic CuO nanoflowers on resin support: recyclable catalyst to obtain perylene compound

Monoclinic CuO crystallite in grams has been obtained from resin bound Cu(II)-1,10-phenanthroline complex, R(-)[Cu(1,10-phen)(2)](2+) that becomes a recyclable catalyst for oxidative phenol coupling (OPC) reaction. Thus an exclusively intuitive blue fluorescing perylene derivative is derived from colorless 2,7-dihydroxynaphthalene (2,7-DHN) in high yield.     

Fabrication of Large‐Scale Hierarchical ZnO Hollow Spheroids for Hydrophobicity and Photocatalysis

We report here the preparation of a crystalline, pure hexagonal phase of ZnO as hollow 500–800 nm spheroids in the presence of organic bases, such as pyridine, using zinc acetate as the precursor salt. The spheroids exhibit unique 3D hierarchical architectures, like cocoons, and demonstrate improved superhydrophobic (water contact angle, 150°) character due to the inherited air‐trapped capillarity within the cocoon structure. The simple synthetic strategy used in this process is modified hydrothermolysis (MHT), which represents a general approach and may contribute to the formation mechanism of the hollow nanostructures with highly improved porosity. Depending on the concentration of the precursor salt, it has been possible to cover glass plates or the inner wall of a reaction vessel with ZnO nanocrystals. A low salt concentration (<0.01 M ) allows the easy preparation of a superhydrophobic glass surface, whereas a high salt concentration (>0.01 M ) results in the precipitation of cocoons at the bottom of the reaction vessel as a solid mass together with a deposited thin film of ZnO nanocrystals covering the inner wall of the glass vessel. The thickness of the film successively grows through repetitive hydrothermolysis processes for which a low salt concentration (<0.01 M ) was employed. Because of the hollow cocoonlike morphology, the surface area of the film is greatly increased, which makes it accessible for functionalization by incoming substrates from both sides (internally and externally) and helps to drive a competent photocatalytic dye degradation pathway. The heterocyclic base pyridine exclusively develops cocoons. Thus, the mechanism of self‐aggregation of ZnO nanocrystals under MHT reaction conditions has been studied and the characterization of the compounds has been supported with physical measurements.     

A direct route to angularly substituted hydrindanes. Formal synthesis of bakkenolide-A and synthesis of an advanced intermediate to umbellactal

A direct route for the synthesis of highly functionalized angularly substituted hydrindanes has been developed. The key step involves RO-RCM of an appropriately functionalized norbornene derivative. The hydrindane derivative obtained in this way has been used to accomplish a formal synthesis of bakkenolide-A. This protocol has also been extended for the synthesis of an advanced intermediate to the synthesis of the diterpene umbellactal.     

Montmorillonite K-10 clay catalyzed solvent-free synthesis of bis-indolylindane-1,3-dione, 2-(1′,3′-dihydro-1H-[2,3′]biindolyl-2′-ylidene)-indan-1,3-dione and bisindolylindeno[1,2-b]quinoxaline under microwave irradiation

An environmentally benign protocol has been described for the synthesis of novel 2-(1′,3′-dihydro-1H-[2,3′]biindolyl-2′-ylidene)-indan-1,3-diones/bis-indolylindane-1,3-diones from ninhydrin and 3-substituted/unsubstituted indoles. It uses montmorillonite K-10 as catalyst in a solvent-free condition under microwave irradiation. The method was also used for the synthesis of novel bisindolylindeno[1,2-b]quinoxaline derivatives.     

Selective synthesis of organogold magic clusters Au54(C≡CPh)26

Organogold clusters Au(54)(C(2)Ph)(26) were selectively synthesized by reacting polymer-stabilized Au clusters (1.2 ± 0.2 nm) with excess phenylacetylene in chloroform.     

Arsenic(III) sorption on nanostructured cerium incorporated manganese oxide (NCMO): a physical insight into the mechanistic pathway

Arsenic(III) sorption was investigated with nanostructured cerium incorporated manganese oxide (NCMO). The pH between 6.0 and 8.0 was optimized for the arsenic(III) sorption. Kinetics and equilibrium data (pH=7.0±0.2, T=303±1.6 K, and I=0.01 M) of arsenic(III) sorption by NCMO described, respectively, the pseudo-second order and the Freundlich isotherm equations well. The sorption process was somewhat complicated in nature and divided into two different segments, initially very fast sorption followed by slow intraparticle diffusion process. Sorption reaction of arsenic(III) on NCMO was endothermic (ΔH°=+13.46 kJ mol(-1)) and spontaneous (ΔG°=-24.75 to -30.15 kJ mol(-1) at T=283-323 K), which took place with increasing entropy (ΔS°=+0.14 kJ mol(-1)K(-1)) at solid-liquid interface. Energy of arsenic(III) sorption estimated by analyzing the equilibrium data using the D-R isotherm model was 15.4 kJ mol(-1), indicating the ion-exchange type mechanism. Raman, FT-IR, pH effect, desorption, etc. studies indicated that arsenic(III) was oxidized to arsenic(V) during the sorption process.     

Highly diastereoselective indium-mediated allylation of chiral hydrazones

The indium-mediated allylation of chiral hydrazones was investigated. Essentially complete diastereoselectivity and quantitative yields were obtained for substrates derived from both aromatic and aliphatic aldehydes. [reaction--see text]