Electrochemical approach to detect the presence of peroxynitrite in aerobic neutral solution

This work describes the conditions of use of bare gold electrode to detect electrochemically the presence of peroxynitrite ONOO^? in phosphate buffer solution at pH 7.1. As ONOO^? is extremely unstable in neutral solution, current–potential curve was reconstructed between ?0.5 and 0.7 V vs SCE by amperometry experiments at rotating disk electrode at different potentials. Comparison of this reconstructed curve with voltammograms of the common interfering species (dopamine, hydrogen peroxide, nitrite, ascorbic acid and glutamate) shows that the presence of ONOO^? can be selectively determined at ?0.1 V vs SCE. This detection occurs through the electrochemical reduction of peroxynitrous acid ONOOH, the conjugated acid of ONOO^?. Detection of ONOO^? produced in situ by the reaction of nitric oxide with superoxide was also achieved.     

Octupolar Derivatives Functionalized with Superacceptor Peripheral Groups: Synthesis and Evaluation of the Electron‐Withdrawing Ability of Potent Unusual Groups

Novel tripodal derivatives with a triphenylamine core and that bear “superacidifiers” (i.e., fluorinated sulfoximinyl blocks) or novel sulfiliminyl moieties as peripheral groups were synthesized. These new chromophores show strong absorption in the near‐UV region and emission in the visible region. The fluorinated sulfoximinyl moieties were found to behave as potent auxochromic and electron‐withdrawing (EW) groups, thus leading to redshifted absorption and emission. These moieties promote a core‐to‐periphery intramolecular charge transfer (ctp‐ICT) transition, the energy of which was found to be correlated to their EW strength. In this study, we provide evidence of a linear correlation between the Hammett constant (σ_p) values and the electronic gap between the ground and first excited state of the three‐branched derivatives. This in turn was used to derive σ_p values of fluorinated sulfoximinyl moieties. These EWGs show unprecedentedly high σ_p values, up to 1.45 relative to 0.8 for NO₂. Also, by using this method, the sulfiliminyl moiety was shown to exhibit similar EW strength as NO₂, while promoting improved transparency and solubility. Finally, the superior EW strength of the fluorinated sulfoximine peripheral moieties was shown to induce significant enhancement of the two‐photon absorption responses in the red near‐IR region of the three‐branched derivatives relative to similar octupoles that bear more usual strong EW groups. These characteristics (improved nonlinear responses or transparency) open new routes for the design of nonlinear optical (NLO) chromophores for optical limiting or electro‐optical modulation. Such building blocks could also be of interest for optoelectronic applications, including the development of solar cells.     

Electrochemical Characterization of Stainless Steel as a New Electrode Material in a Medical Device for the Diagnosis of Sudomotor Dysfunction

An electrochemical sensor detects the risk of diabetes and prediabetes; low potentials are applied to nickel electrodes and electrical responses are measured. Although the contact of nickel with skin is short, the risk of allergical reactions cannot be discarded. SS 304L, with lower Ni content, was tested in carbonate buffer solutions containing chloride, lactate and urea to investigate its sensitivity to different parameters in sweat and compare it to nickel. The results show that SS 304L is a suitable material for the assessment of sudomotor dysfunction due to its high capacity to detect the deviation in Cl^? concentration. Sensitivity of SS 304L to Cl^? is much higher than for nickel.     

Asymmetric base-mediated epoxide isomerisation

The base-mediated rearrangement of epoxides into allylic alcohols is a well-known synthetic transformation. The first enantioselective version of the reaction using a chiral base was reported in 1980. Since then, the reaction has received a lot of attention mostly due to the great usefulness of chiral allylic alcohols in organic synthesis. Major breakthroughs in the area were the first report on using a sub-stoichiometric amount of chiral base, and the development of chiral bases for a true catalytic reaction protocol. The present review covers the time from when the first asymmetric epoxide isomerisation reaction was reported (1980) up to now, focusing on the period 1997-2001.     

Activated carbon oxygen content influence on water and surfactant adsorption

This research investigates the adsorption properties of three activated carbons (AC) derived from coconut, coal, and wood origin. Each carbon demonstrates different levels of resistance to 2 M NaOH treatment. The coconut AC offers the greatest and wood AC the least resistance. The influence of base treatment is mapped in terms of its effects on specific surface area, micropore volume, water adsorption, and dodecanoic acid adsorption from both water and 2 M NaOH solution. A linear relationship exists between the number of water molecules adsorbed at the B-point of the water adsorption isotherm and the oxygen content determined from elemental analysis. Surfactant adsorption isotherms from water and 2 M NaOH indicate that the AC oxygen content effects a greater dependence on affinity for surfactant than specific surface area and micropore volume. We show a linear relationship between the plateau amount of surfactant adsorbed and the AC oxygen content in both water and NaOH phases. The higher the AC oxygen content, the lower the amount of surfactant adsorbed. In contrast, no obvious relationship could be drawn between the surfactant amount adsorbed and the surface area.     

Unprecedented reversible migration of amide to schiff base ligands attached to tin: latent single-site initiators for lactide polymerization

In an unprecedented transformation, amide ligands are found to attack the imine carbon centers of tridentate Schiff base ligands attached to tin. The process is reversible, and the resultant (masked) amide species can be exploited as latent single-site initiators for the controlled polymerization of rac-lactide.     

Spirobicyclo[2.2.2]octane derivatives: mimetics of baccatin III and paclitaxel (Taxol)

The formylated spirobyclic alcohol was computer modeled to be a mimetic of paclitaxel. In this model, the formyl group was used as a truncated paclitaxel side chain in order to reduce the computational work. Compound , carrying the paclitaxel side chain, was synthesized in six steps from optically active 1,3-diketone . Microtubule stabilization was not observed for , indicating that the model needs to be adjusted.     

Thin film platinum cuff electrodes for neurostimulation: in vitro approach of safe neurostimulation parameters

Thin film technology takes more and more importance in the development of biomedical devices dedicated to functional neurostimulation. Our research about the design of implant neurostimulating electrode is oriented toward thin film cuff electrodes based on a polyimide substrate covered by a chromium/gold/Pt film. The chromium/gold sputtered film serves as adhesion layer and current collector whereas platinum acts as an electrochemical actuator. The electrode surface has been designed to obey safe stimulation criteria (i.e. chemically inert noble metal, low electrode-electrolyte impedance, high electrochemical reversibility, high corrosion stability). The electrochemical behaviour of such platinum electrodes has been assessed and compared to a foil of platinum. Extensive in vitro characterisations of the both electrode types were carried out using AFM, SEM and electrochemical techniques. The role of enhanced surface roughness enabling high double layer capacitances to be achieved was clearly highlighted. The obtained results are discussed, with particular reference to thin film electrodes stability under in vitro electrical stimulation in NaCl 0.9% (physiological serum). Therefore, these thin film devices showed reversible PtOH formation and decomposition making them potentially attractive for the fabrication of implant stimulation cuff electrodes.     

Interpretation of CALUX results in view of the EU maximal TEQ level in milk

Analyses of dioxins in food have become increasingly important since the European Commission has enforced maximal toxic equivalent concentration (TEQ) levels in various food and feed products. Screening methodologies are usually used to exempt those samples that are below the maximum permitted limit and that can, therefore, be released to the market. In addition, one needs to select those samples that require confirmation of their dioxin TEQ level. When bioassays are used as screening tools, the interpretation of the obtained results should consider the higher variability and uncertainty associated with them. This paper explores the use of CALUX data as quantitative screening results. The validation of the method for the polychlorinated dibenzo-p-dioxins (PCDD)/F TEQ determination in milk samples is described with emphasis on the decision limit (CC) and the precision of the method. The decision limit amounts to 4.53 pg TEQ/g fat. Repeatability and within-lab reproducibility coefficients of variation are below 30%. The newly introduced parameter CC^* of 1.47 pg TEQ/g fat delimits with CC a range of suspicious results. These data are not significantly different from the maximum limit of 3 pg TEQ/g fat and should be confirmed by a confirmatory analytical method such as HRGC–HRMS.