Quantitative determination of duloxetine and its metabolite in rat plasma by HPLC‐MS/MS

The major metabolite of duloxetine is a glucuronide conjugate of 4‐hydroxy duloxetine (4‐HD). However, interestingly, there have been no reports determining concentrations of 4‐HD and no fully validated method has been established for measuring duloxetine and 4‐HD in rat plasma. We developed a method for the simultaneous quantification of duloxetine and its metabolite in rat plasma using high‐performance liquid chromatography tandem mass spectrometry. Duloxetine and 4‐HD were analyzed on a reverse‐phase C₁₈ analytical column after protein precipitation of the plasma sample with methanol, using carbamazepine as an internal standard. The isocratic mobile phase of 5 mm ammonium acetate–methanol (4:6, v/v) was eluted at 0.4 mL/min. Quantification was performed on a triple‐quadrupole mass spectrometer using electrospray ionization, and the ion transition monitored in selective reaction monitoring mode. The coefficient of variation for assay precision was <18.0%, and the accuracy was 84.0–118.0%. This method was successfully used to measure the concentrations of duloxetine and its metabolite in plasma following the oral administration of a single 40 mg/kg dose in rats. Copyright © 2013 John Wiley & Sons, Ltd.     

Improved Compatibility of Styrene-Maleic Anhydride Copolymer/Polyethylene Blends Through Reactive Mixing

Abstract

To improve the compatibility of styrene-maleic anhydride copolymer/low density polyethylene (SMA/LDPE) blends, LDPE grafted with 2-hydroxyethyl methacrylate-isophorone diisocyanate (LDPE-g-HI) was prepared and blended with SMA of which anhydride was converted to carboxylic acid (SMAAc). The infrared spectra of LDPE-g-HI established the presence of isocyanate group. In the blend morphology, some adhesions between the two phases and much finer dispersions were observed in the SMAAc/LDPE-g-HI blends, indicating that chemical reactions took place during the melt blending. The lower heat capacity change at the glass transition temperature demonstrated that chemical bonds were produced in the SMAAc/LDPE-g-HI blends. From the results of the rheological test, it was found that strong positive deviation from the mixing rule occurred in viscosity for the SMAAc/LDPE-g-HI blends, concerning with good adhesion and finer dispersions. In the measurement of tensile property, the improved mechanical properties for the SMAAc/LDPE-g-HI blends were shown.     

New Methods for β-Lactam Formation from β-Amino Acids Using (C6H5)3P/CC14 and (C6H5)3P/NBS

Triphenylphosphine/carbon tetrachloride and triphenyl-phosphine/N-bromosuccinimide were found to be very effective for β-lactam formation from β-amino acids in acetonitrile.     

Deposition of a Continuous and Conformal Copper Seed Layer by a Large-Area Electron Cyclotron Resonance Plasma Source with Embedded Lisitano Antenna

To deposit copper seed layer on ultra large scale integration devices, a large-area (Ø 378 mm) electron cyclotron resonance plasma has been generated by using permanent magnets-embedded Lisitano antenna. The plasma source operates in the pressure range of 0.2–1.5 mTorr with microwave power range of 500–2,000 W. By using a Langmuir probe, the electron density and temperature have been measured near the DC sputter target position. Measurements indicate argon plasmas having electron densities of ~5 × 10¹⁰/cm and electron temperatures of 5 eV with 750 W microwave power at gas pressures of 0.5 mTorr. Using this plasma source and a DC sputter, we obtained excellent conformal copper seed layer with high aspect ratios of 12:1. This is in contrast with conventional methods using magnetron sputter, which has aspect ratios of 2–3:1. Also, improvements are observed in the smoothness (root mean square roughness of 1.345 nm), uniformity (2.5 % at 300 mm wafer), and sidewall symmetricity (more than 95 %) of the copper seed layer.     

A Phosphorescent Platinum(II) Bipyridyl Supramolecular Polymer Based on Quadruple Hydrogen Bonds

A platinum(II) bipyridyl complex bearing bis‐ureidopyrimidinone (Pt‐bisUPy) has been designed and its self‐assembling behavior has been thoroughly investigated by ¹H NMR, DOSY NMR, Ubbelohde viscometry analysis, UV/Vis, and emission spectroscopies. Pt‐bisUPy underwent concentration‐dependent ring‐chain polymerization in apolar solvents. Hydrogen‐bonding interactions play an important role during the formation of the supramolecular polymers. Hydrogen‐bonded supramolecular polymers were transformed to nanoparticles in water through the miniemulsion method. These nanoparticles showed strong π–π excimeric emission. Metal‐metal‐to‐ligand charge transfer (MMLCT) from Pt–Pt interactions was not significant in the emission spectrum. The phosphorescence of the nanoparticle persisted even under aerobic conditions. The triplet state of these phosphorescent nanomaterials were long‐lived and possessed moderate emission quantum yields. Furthermore, the low toxicity of these materials promises a place for them in in vitro and in vivo bioimaging.     

Photoswitchable Composite Polymer Electrolytes Using Spiropyran-Immobilized Nanoporous Templates

Composite polymer electrolytes (CPEs) with smart, stimuli-responsive characteristics have gained considerable attention owing to their noninvasive manipulation and applications in future technologies. To address this potential, in this work, we demonstrate photoresponsive composite polymer electrolytes, consisting of gel polymer electrolyte (GPE) and spiropyran-immobilized nanoporous anodic aluminum oxide (SP-AAO) templates. Under UV irradiation, the close SP form isomerizes to the open merocyanine (MC) form, creating extremely polarized AAO surfaces; whereas, under visible light irradiation, the MC form reverts to the SP form, creating neutral surface conditions. The electrostatic interactions between ions and AAO surfaces are investigated by attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy. Moreover, the behavior of ionic conductivity of the GPE@SP-AAO is found to be consistent with the kinetics of isomerization tracked by UV-Vis spectroscopy. This work provides a promising platform for developing next-generation photoelectronic smart devices.     

Applicability of in situ detectors for radiological assessment of strontium-90 in rivers and lakes

Journal of Radioanalytical and Nuclear Chemistry - An in situ detector for radiological assessments of strontium-90 (90Sr) in river and lake water is developed, based on a CaF2(Eu) scintillator,...     

Titanium Trichloride Reactions: Dehalogenation

We have recently established preparative procedures for titanium(III) reduction of sulfoxides to sulfides¹ and nitroarenes to amines.² In continuation of this program which is aimed at exploring the synthetic potential of titanium(III) ion, we have found that α-haloketones undergo facile dehalogenation upon treatment with titanium trichloride.