Biological Removal of Phosphate at Low Concentrations Using Recombinant Escherichia coli Expressing Phosphate-Binding Protein in Periplasmic Space

During wastewater treatment, phosphate removal is an important and challenging process; thus, diverse technologies, including those derived from biological means, have been devised for efficient phosphate removal. Although conventional biological methods are effective in decreasing wastewater phosphate levels to ~1 mg/L, long periods of microbial adaptation are required for effective phosphate removal, and the removal efficiency of these methods is relatively poor at lower phosphate concentrations. In the present work, we constructed a recombinant Escherichia coli with periplasmic-expressed phosphate-binding protein (PBP) and investigated its biological removal ability for low phosphate levels. We found that the PBP-expressing recombinant E. coli cells showed efficient (> 94 %) removal of phosphate at low concentrations (0.2–1.0 mg/L) in a treated cell mass-dependent manner. Collectively, we propose that our PBP-expressing recombinant whole-cell system could be successfully used during wastewater treatment for the biological removal of low concentrations of phosphate.     

Anisotropic electrical properties of Bi0.5(Na0.75K0.25)0.5TiO3 ceramics fabricated by reactive templated grain growth (RTGG)

We have fabricated lead-free Bi_0.5(Na_0.75K_0.25)_0.5TiO₃ (BNKT) ceramics by a conventional process (CP) and reactive templated grain growth (RTGG) methods. The effect of grain orientation on structure, dielectric, complex impedance and electrical properties was investigated. The phase formation and grain morphology of BNKT ceramics were examined by X-ray diffraction (XRD) and scanning electron microscope (SEM), respectively. High dielectric constant and low dielectric loss was observed for grain oriented (textured) BNKT ceramics. Complex impedance, temperature dependent ac and dc conductivity were performed to explore the conduction behavior of the prepared BNKT ceramics.     

Vibro-impact analysis of two adjacent cantilever beams

Nonlinear Dynamics - This study analyzes the vibro-impact behavior of two adjacent cantilever beams subjected to vibration generated by applying harmonic excitation to their rigid base. For the...     

Enhancement of CO2 sorption uptake on hydrotalcite by impregnation with K2CO3

The awareness of symptoms of global warming and its seriousness urges the development of technologies to reduce greenhouse gas emissions. Carbon dioxide (CO(2)) is a representative greenhouse gas, and numerous methods to capture and storage CO(2) have been considered. Recently, the technology to remove high-temperature CO(2) by sorption has received lots of attention. In this study, hydrotalcite, which has been known to have CO(2) sorption capability at high temperature, was impregnated with K(2)CO(3) to enhance CO(2) sorption uptake, and the mechanism of CO(2) sorption enhancement on K(2)CO(3)-promoted hydrotalcite was investigated. Thermogravimetric analysis was used to measure equilibrium CO(2) sorption uptake and to estimate CO(2) sorption kinetics. The analyses based on N(2) gas physisorption, X-ray diffractometry, Fourier transform infrared spectrometry, Raman spectrometry, transmission electron microscopy, scanning electron microscopy, and energy dispersive X-ray spectroscopy were carried out to elucidate the characteristics of sorbents and the mechanism of enhanced CO(2) sorption. The equilibrium CO(2) sorption uptake on hydrotalcite could be increased up to 10 times by impregnation with K(2)CO(3), and there was an optimal amount of K(2)CO(3) for a maximum equilibrium CO(2) sorption uptake. In the K(2)CO(3)-promoted hydrotalcite, K(2)CO(3) was incorporated without changing the structure of hydrotalcite and it was thermally stabilized, resulting in the enhanced equilibrium CO(2) sorption uptake and fast CO(2) sorption kinetics.     

High performance Zn–Sn–O thin film transistors with Cu source/drain electrode

Zn–Sn–O (ZTO) thin film transistors (TFTs) were fabricated with a Cu source/drain electrode. Although a reasonably high mobility (μ_FE) of 13.2 cm²/Vs was obtained for the ZTO TFTs, the subthreshold gate swing (SS) and threshold voltage (V_th) of 1.1 V/decade and 9.1 V, respectively, were inferior. However, ZTO TFTs with Ta film inserted as a diffusion barrier, exhibited improved SS and V_th values of 0.48 V/decade and 3.0 V, respectively as well as a high μ_FE value of 18.7 cm²/Vs. The improvement in the Ta‐inserted device was attributed to the suppression of Cu lateral diffusion into the ZTO channel region. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effect of Penetration Enhancers on Toenail Delivery of Efinaconazole from Hydroalcoholic Preparations

The incorporation of permeation enhancers in topical preparations has been recognized as a simple and valuable approach to improve the penetration of antifungal agents into toenails. In this study, to improve the toenail delivery of efinaconazole (EFN), a triazole derivative for onychomycosis treatment, topical solutions containing different penetration enhancers were designed, and the permeation profiles were evaluated using bovine hoof models. In an in vitro permeation study in a Franz diffusion cell, hydroalcoholic solutions (HSs) containing lipophilic enhancers, particularly prepared with propylene glycol dicaprylocaprate (Labrafac PG), had 41% higher penetration than the HS base. Moreover, the combination of hydroxypropyl-β-cyclodextrin with Labrafac PG further facilitated the penetration of EFN across the hoof membrane. In addition, this novel topical solution prepared with both lipophilic and hydrophilic enhancers was physicochemically stable, with no drug degradation under ambient conditions (25 °C, for 10 months). Therefore, this HS system can be a promising tool for enhancing the toenail permeability and therapeutic efficacy of EFN.     

Characterization of Hydrophobic SiO2 Powders Prepared by Surface Modification on Wet Gel

Hydrophobic porous silica has been prepared by surface modification of TEOS (tetraethylorthosilicate) wet gel with 6 and 12 vol.% of TMCS (trimethylchlorosilane). We characterized the products by using FT-IR, TGA, DTA, N₂ adsorption/desorption, contact angle and SEM. Surface silanol groups of the gel were widely replaced by–Si(CH₃)₃ to result in a hydrophobic SiO₂ powder as confirmed by contact angle measurements with H₂O, 1-butanol and ethanol. The modified dried gels had a surface area of 950–1000 m²/g (average pore size 120 Å), compared to the non-modified surface which had a surface area of 690 m²/g (average pore size 36 Å). The adsorption/desorption isotherm curves indicated they had similar pore characteristics as aerogels prepared by the supercritical drying process.