Enhanced Physical and Mechanical Properties of Nitrile-Butadiene Rubber Composites with N-Cetylpyridinium Bromide-Carbon Black

The physical and mechanical properties of nitrile–butadiene rubber (NBR) composites with N-cetylpyridinium bromide-carbon black (CPB-CB) were investigated. Addition of 5 parts per hundred rubber (phr) of CPB-CB into NBR improved the tensile strength by 124%, vulcanization rate by 41%, shore hardness by 15%, and decreased the volumetric wear by 7% compared to those of the base rubber-CB composite.     

Optimized Aluminum Reflector for Enhancement of UVC Cathodoluminescence Based-AlGaN Materials with Carbon Nanotube Field Emitters

The far ultraviolet C (UVC) light sources based on carbon nanotube (CNT) field emitters as excitation sources have become promising light sources for sterilization, disinfection, and water purification. However, the low light extraction efficiency of UVC–CNT light sources still hinders the practical application of these structures. Herein, we report an optimized aluminum (Al) reflector to enhance the light extraction efficiency of UVC–CNT light sources. Optical analysis of UVC-CNT light sources covered by the Al reflectors with various thicknesses ranging from 30 to 150 nm was performed to realize the optimized reflector. The UVC-CNT light sources exhibit the highest light extraction efficiency when the Al reflector layer has an optimized thickness of 100 nm. For comparison, the cathodoluminescence (CL) spectra were recorded for UVC–CNT light sources with and without the optimized Al reflector. The measured light output power and the estimated power efficiency of the UVC–CNT light-source-tube with Al reflector were enhanced by about 27 times over the reference. This enhancement is mainly attributed to the outstanding reflection effect of the Al reflector.     

SnO2 Quantum Dots Distributed along V2O5 Nanobelts for Utilization as a High-Capacity Storage Hybrid Material in Li-Ion Batteries

In this study, the facile synthesis of SnO₂ quantum dot (QD)-garnished V₂O₅ nanobelts exhibiting significantly enhanced reversible capacity and outstanding cyclic stability for Li⁺ storage was achieved. Electrochemical impedance analysis revealed strong charge transfer kinetics related to that of V₂O₅ nanobelts. The SnO₂ QD-garnished V₂O₅ nanobelts exhibited the highest discharge capacity of ca. 760 mAhg⁻¹ at a density of 441 mAg⁻¹ between the voltage ranges of 0.0 to 3.0 V, while the pristine V₂O₅ nanobelts samples recorded a discharge capacity of ca. 403 mAhg⁻¹. The high capacity of QD-garnished nanobelts was achieved as an outcome of their huge surface area of 50.49 m²g⁻¹ and improved electronic conductivity. Therefore, the as-presented SnO₂ QD-garnished V₂O₅ nanobelts synthesis strategy could produce an ideal material for application in high-performance Li-ion batteries.     

Monte Carlo simulation of film growth in a phase separating binary alloy model

Using a kinetic Monte Carlo method, we simulate binary film (A_0.5B_0.5/A) growth on an L×L square lattice with the focus on the domain growth behaviour. We compute the average domain area, A(t), as a measure of domain size. For a sufficiently large system, we find that A(t) grows with a power law in time with A(t)∼t^2/3 after the initial transient time. This implies that the dynamic exponent for domain growth with non-conserved order parameter is z=3, a value which was theoretically predicted for the conserved order parameter case. Further analysis reveals that such a power-law behaviour emerges because the order parameter is approximately conserved after the early stage of growth.     

Coupling of crystalline colloidal arrays with intrinsically conductive polymers: Reflection-type electrochromic devices

The attenuation of the reflected light from a polystyrene (PS) polymerized crystalline colloidal array (PCCA) is achieved through the electrochemical switching of the electrochromic material polyaniline-poly(2-acrylamido-2-methyl-1-propanesulfonicacid) (PANI-PAMPS). For this purpose, layered electrochromic devices (ECDs) were fabricated that employed a PS PCCA film, acting as both a reflecting substrate and polymeric electrolyte, and the conducting polymer PANI-PAMPS, which served as the electrochromic layer. The resulting ECDs exhibited the attenuation of reflectance peak at the stop band position of the PCCA with a 3% of reflectance contrast ratio.     

Multiresidue analysis of pesticides with hydrolyzable functionality in cooked vegetables by liquid chromatography tandem mass spectrometry

It would be preferable for pesticide residues substituted by hydrolyzable functionality to be analyzed after cooking because their structures are apt to degrade during boiling and/or heating. A liquid chromatography–tandem mass spectrometry (LC‐MS/MS) method for the quantitative determination of 44 pesticide residues with hydrolyzable functional group in five typical vegetable widely consumed in Republic of Korea is described. The sample clean‐up was carried out according to the method of Food Code No. 83 established by the Korea Food and Drug Administration (KFDA). Zorbox XDB‐C₁₈ column was selected for the analysis because of the best peak separation. The LC mobile phase consisted of water and 5 mm methanolic ammonium formate, which resulted in a peak shape with good symmetry at each run. Tandem mass spectroscopic (MS/MS) experiments were performed in ESI positive mode and the multiple reaction monitoring modes. A conventional matrix effect was modified to more comprehensive form 100γ_ij (%). A high matrix effect (相似文献   

HPLC determination of irbesartan in human plasma: its application to pharmacokinetic studies

A simple and rapid HPLC method using fluorescence detection was developed for determination of irbesartan in human plasma. Sample preparation was accomplished through a simple deproteinization procedure with 0.4 mL of acetonitrile containing 800 ng/mL of losartan (internal standard), and to a 0.1 mL plasma sample. Chromatographic separation was performed on a Zorbax Xclipse XDB C₁₈ column (150 × 4.6 mm, i.d., 5 µm) at 40°C. An isocratic mobile phase, acetonitrile:0.1% formic acid (37:63, v/v), was run at a flow‐rate of 1.0 mL/min, and the column eluent was monitored using a fluorescence detector set at excitation and emission wavelengths of 250 and 370 nm, respectively. The retention times of irbesartan and losartan were 4.4 and 5.9 min, respectively. This assay was linear over a concentration range of 10–5000 ng/mL with a lower limit of quantification of 10 ng/mL. The coefficient of variation for this assay precision was less than 8.48%, and the accuracy exceeded 94.4%. The mean relative recoveries of irbesartan and losartan were 98.4 and 99.1%, respectively. This method was successfully applied for pharmacokinetic study after oral administration of irbesartan (300 mg) to 23 Korean healthy male volunteers. Copyright © 2009 John Wiley & Sons, Ltd.     

Catalytic and highly regiospecific carbon-carbon bond formation at alpha-position of Michael acceptor by palladium complex

Activated olefins react with allyl acetates and Bu3SnH in the presence of a catalytic amount of a palladium catalyst to afford the corresponding products which construct a new C-C bond selectively at the alpha-position of Michael acceptors.