Characterization of the structure and organization of β-form crystals in type III and type IV isotactic polypropylene spherulites

Anisotropic growth of β-form crystals of isotactic polypropylene in type III and type IV spherulites has made possible microanalysis of the unit cell structure, optical properties, and crystal arrangement within the spherulites. Micro x-ray studies of the type III and type IV spherulites show that interspherulitic β-form crystals have a hexagonal unit cell with dimensions; a = 19.08 Å and c = 6.49 Å. The intrinsic refractive indices of these β-form crystals are 1.506 along the a axis and 1.536 along the c axis. The organization of the crystals within the spherulites and the optical properties of the spherulites are also quantitatively evaluated. Both the type III and type IV spherulites have the a axis of the crystal radial while the crystals rotate randomly around the type III spherulite radii and periodically around the type IV spherulite radii. The radial refractive index for both the type III and type IV spherulites has the same value of 1.496. The tangential refractive index of the type III spherulite has a constant value of 1.509; it varies periodically between a minimum of 1.496 and a maximum of 1.519 in the type IV spherulite. Microtechniques such as micro x-ray diffraction, interference microscopy, birefringence, and optical microscopy were required for acquisition of the data.     

ToF atom-probe fim study of LaB6 single crystals

The field evaporation mass spectra of LaB₆ are obtained with time-of-flight atom-probe field ion microscope in vacuum and in the presence of hydrogen, nitrogen and oxygen. The spectra are consistent with a preferential chemisorption of these gases on boron sites.     

Room temperature diluted magnetic semiconductor synthesized by dual beam laser deposition

Diluted magnetic semiconductor Co-doped ZnO film has been synthesized by a dual beam pulsed laser deposition method. The magnetic, electrical, and optical properties of the Zn_0.985Co_0.015O_0.67 film are studied in this paper. The film shows ferromagnetic behavior with a coercivity of about 300 Oe at room temperature, and semiconductor behavior with carrier concentration of 2.2×10¹⁸ cm^-3, and a resistivity of 102 mcm. Structural investigations indicated that the film has similar lattice constants to that of ZnO. It is shown that the film exhibits excellent optical properties with a band gap energy of 3.31 eV, which is close to that of ZnO. The origins of the magnetism are also discussed. PACS 81.15.Fg; 75.50 Pp; 61.72.Vv     

Torsional wave experiments with a new magnetostrictive transducer configuration

For the efficient long-range nondestructive structural health inspection of pipes, guided waves have become widely used. Among the various guided wave modes, the torsional wave is most preferred since its first branch is nondispersive. Our objective in this work is to develop a new magnetostrictive transducer configuration to transmit and receive torsional waves in cylindrical waveguides. The conventional magnetostrictive transducer for the generation and measurement of torsional waves consists of solenoid coils and a nickel strip bonded circumferentially to test pipes. The strip must be premagnetized by a permanent magnet before actual measurements. Because of the premagnetization, the transducer is not suitable for the long-term on-line monitoring of pipes buried underground. To avoid the cumbersome premagnetization and to improve the transduction efficiency, we propose a new transducer configuration using several pieces of nickel strips installed at 45 degrees with respect to the pipe axis. If a static bias magnetic field is also applied, the transducer output can be substantially increased. Several experiments were conducted to study the performance of the proposed transducer configuration. The proposed transducer configuration was also applied for damage detection in an aluminum pipe.     

A new direction in carbon-rich organometallic wires: diruthenium compounds bridged by E-hex-3-ene-1,5-diyn-diyl

New organometallic wires were obtained from two diruthenium units bridged by E-hex-3-ene-1,5-diyn-dyl.     

Protein recognition using synthetic surface-targeted agents

The design of synthetic agents to disrupt protein-protein interactions has received relatively little attention in recent years. In this review we describe strategies for targeting different types of protein surfaces using mimetics of protein secondary or tertiary structure. In this way strong and selective binding to a protein surface has be achieved and disruption of clinically important protein-protein interactions has been demonstrated in models of human disease.     

Titania-Doped Silica Fibers Prepared by Electrospinning and Sol-Gel Process

Titania-doped silica fibers were prepared by electrospinning of the sol of silica containing titania. The electrospun fibers had ribbon type morphology. The fibers had significant quantities of hydroxyl groups of Si—OH and Ti—OH. The fibers did not have crystalline structure. Diameters of the fibers were reduced by solvent evaporation and calcination. The hydroxyl groups on the fibers disappeared by calcination. The hydroxyl groups, M—OH (MSi, Ti) were changed to M—O—M by intermolecular and intramolecular condensation reactions.     

Loss-coupled distributed-feedback lasers with amplified optical feedback for optical microwave generation

Multisection semiconductor lasers for optical microwave generation have been fabricated that consist of a loss-coupled distributed feedback (LC-DFB), a phase control, and an amplifier section. High-frequency self-pulsations are generated according to the concept of a single-mode laser with short optical feedback. The effect of the optical feedback via the phase control and the amplifier section on the self-pulsation is apparently shown as a result of the superior single-mode characteristic of the LC-DFB section. Continuous frequency tuning is achieved in the range of 17-35 GHz.     

Phase-shifting windowed Fourier ridges for determination of phase derivatives

Determination of the phase or phase derivative from interferometric fringe patterns is an important task in optical interferometry. The use of wavelet ridges was recently shown to be an effective method for phase retrieval from a single fringe pattern. One necessary requirement in this method is the need for carrier frequency. In cases when carrier frequency is not available, the novel phase-shifting windowed Fourier ridges method can be used. Phase derivatives with the proper sign can be directly retrieved even in the presence of noise. An application for curvature determination from speckle shearographic fringes demonstrates the effectiveness of the method.     

Indium-mediated reductive elimination of halohydrins

Olefin formation has been successfully carried out by reductive elimination reactions of halohydrins with Pd(PPh(3))(4)/In/InCl(3) in aqueous media.