An evaluation of exogenous application of protoporphyrin IX and its dimethyl ester as a photodynamic diagnostic agent in poorly differentiated human nasopharyngeal carcinoma

5-Aminolevulinic acid and its esterified analogues have been under much investigation to enhance the endogenous production of protoporphyrin IX (PpIX) in tumor cells. However, in this work, we studied the in vitro and in vivo efficacy of exogenously administered PpIX and its esterified analogue, PpIX dimethyl ester (PME), in poorly differentiated human nasopharyngeal carcinoma (NPC/CNE-2) as a photodynamic diagnostic (PDD) agent. NPC/CNE-2 at its earliest time, 1 h after incubation with PME in in vitro studies, has exhibited 64% (P <0.01) higher tumor to normal cell (T/N) fluorescence ratio than with PpIX. In an in vivo mouse xenograft model, comparable photosensitizer concentration in tumor after intravenous administration was observed at 1-3 h time points, but at 9 h, PME had 31% (P=0.05) greater concentration in tumor compared with PpIX. In addition, by constituting PME and PpIX in different topical gel composites, of which, PME gel composition of 8:2 Plasdone and Gantrez resulted in the highest T/N ratio at 6 h after application (34%; P <0.05) in comparison with other gel composites. Evaluation of PME and PpIX constituted in the delivery vehicles investigated showed comparable selectivity for tumor at 1-3 h, thus neither photosensitizer is more efficient than the other for PDD at the early time points; however, beyond 6 h, PME had higher selectivity for tumor compared with PpIX. Thus, further investigation is warranted to improve the drug delivery vehicle for greater tumor selectivity at a shorter incubation time.     

The synthesis and fluxional behavior of the first [2.1.2.1] metacyclophane

8,15,23,30-Tetramethyl[2.1.2.1]metacyclophane,4, is synthesised. Variable temperature ¹Hmr and ¹³Cmr spectra indicate that 4e is the most likely conformation and that at temperatures above 50°C the molecule is fluxional (ΔG^≠₃₂₃ = 15.4 kcal/mole).     

Cyclometallated Pd(II) azido complexes containing 6-phenyl-2,2'-bipyridyl or 2-phenylpyridyl derivatives: synthesis and reactivity toward organic isocyanides and isothiocyanates

Cyclometallated palladium(II) azido complexes containing C,N,N- or C,N-donor ligands, [Pd(N(3))L](HL = 6-phenyl-2,2'-bipyridine or 2-phenylpyridyl derivatives), showed different reactivities toward organic isocyanides and isothiocyanates. In particular, aryl isocyanides (CN-Ar) underwent insertion into the orthometallated Pd-C bond on the phenyl moiety of the supporting ligand (L) in [Pd(N(3))L] or [Pd(N(3))(PR(3))L] to selectively give carbodiimido [[Pd(N=C=N-Ar)L]], imidoyl [[Pd(N(3))(-C=N-Ar)(PR(3))L]], or imidoyl carbodiimido complexes [[Pd(N=C=N-Ar)(-C=N-Ar)L] or [Pd(N=C=N-Ar)(-C=N-Ar)(PR(3))L]], depending on reaction conditions. Interestingly, reactions of [Pd(N(3))(PR(3))L] with organic isothiocyanates gave unusual dinuclear complexes [(micro-SCN(4)-R)PdL](2), exhibiting the concurrent S- and N-coordinating thio-tetrazole bridge.     

Magnetically recoverable chiral catalysts immobilized on magnetite nanoparticles for asymmetric hydrogenation of aromatic ketones

Novel heterogenized asymmetric catalysts were synthesized by immobilizing preformed Ru catalysts on magnetite nanoparticles via the phosphonate functionality and were characterized by a variety of techniques, including TEM, magnetization, and XRD. These nanoparticle-supported chiral catalysts were used for enantioselective heterogeneous asymmetric hydrogenation of aromatic ketones with very high enantiomeric excess values of up to 98.0%. The immobilized catalysts were easily recycled by magnetic decantation and reused for up to 14 times without loss of activity and enantioselectivity. Orthogonal nature of the present catalyst immobilization approach should allow the design of other superparamagnetic nanoparticle-supported asymmetric catalysts for a wide range of organic transformations.     

NMR and X-ray crystallography, complementary tools in structural proteomics of small proteins

NMR spectroscopy and X-ray crystallography, the two primary experimental methods for protein structure determination at high resolution, have different advantages and disadvantages in terms of sample preparation and data collection and analysis. It is therefore of interest to assess their complementarity when applied to small proteins. Structural genomics/proteomics projects provide an ideal opportunity to make such comparisons as they generate data in a systematic manner for large enough numbers of proteins to allow firm conclusions to be drawn. Here we report a comparison for 263 unique proteins screened by both NMR spectroscopy and X-ray crystallography in our structural proteomics pipeline. Only 21 targets (8%) were deemed amenable to both methods based on an initial 2D 15N-HSQC NMR spectrum and optimized crystallization trials. However, the use of both methods in the pipeline increased the total number of targets amenable to structure determination to 107, with 43 amenable to NMR only and 43 amenable to X-ray crystallographic methods only. We did not observe a correlation between 15N-HSQC spectral quality and the success of the same protein in crystallization screens. Similar results were found for an independent set of 159 proteins as reported in the accompanying paper by Snyder et al. Thus, we conclude that both methods are highly complementary, and in order to increase the number of proteins suited for structure determination, we suggest that both methods be used in parallel in screening of all small proteins for structure determination.     

Viscosities ofn-alkylamines from 15 to 80°C

The viscosities of seven n-alkylamines from n-butylamine to n-decylamine were determined from 15 to 80°C at 5°C intervals. The intrinsic volumes were determined by extrapolation of the plot of fluidity against molar volume to zero fluidity and found to be a linear function of the number of carbon atoms. Plots of the logarithm of viscosity vs. reciprocal absolute temperature were almost linear. The energies of activation for viscous flow for the n-alkylamines were calculated and found to increase with increase in the carbon number. The B values, based on Hildebrand's equation and representing a measure of a molecules resistance to transport of momentum, were calculated for each of the n-alkylamines. A modified form of the equation describing the change fluidity with temperature was then formulated. It is suggested that the activation energy for viscous flow consists of the sum of the energy required for the expansion of the void volume and the energy required to overcome intermolecular interactions. These energies were calculated and discussed.     

Nanophase segregation and water dynamics in the dendrion diblock copolymer formed from the Fréchet polyaryl ethereal dendrimer and linear PTFE

We propose a new material consisting of a dendrion copolymer formed from (a) a water-soluble dendritic polymer and (b) a hydrophobic backbone. Using molecular dynamics simulations techniques, we determine the structure and dynamics of the dendrion formed by second-generation Fréchet polyaryl ethereal dendrimer as the hydrophilic component and linear polytetrafluoroethylene (PTFE) as the hydrophobic polymer, with 5 and 10 wt % of water. We find that this material produces a well-developed nanoscale structure in which water forms a continuous nanophase, making this new family of compounds promising candidates for applications in fuel cell membranes. We find that the water molecules are incorporated into the dendrimer block of the copolymer to form a nanophase-segregated structure. The well-developed nanophase-segregated structures rendered by this material have characteristic dimensions of segregation ( approximately 30 Angstrom) and dendrimer conformational properties that are independent of water content. Calculations of water dynamics and proton transport in these nanophase-segregated structures indicate that the dendrion copolymer membrane with 10 wt % of water content has a water structure and transport properties equivalent to that of the hydrated Nafion membrane with 20 wt % of water content.     

Synthesis and reactivity of 1,2-bis(chlorodimethylgermyl)carborane and 1,2-bis(bromodimethylstannyl)carborane

The 1,2-bis(chlorogermyl)- (1) and 1,2-bis(bromostannyl)carborane (2) have been prepared by the reaction of dilithio-o-carborane with Me(2)GeCl(2) and Me(2)SnBr(2), respectively. Compounds 1 and 2 are found to be good precursors for the synthesis of a variety of cyclization compounds. The Wurtz-type coupling reaction of 1 and 2 using sodium metal afforded the four-membered digerma compound 3 and five-membered tristanna compound 4, respectively. The salt elimination reactions of 1 and 2 using Li(2)N(t)Bu and Li(2)PC(6)H(5) afforded the cyclic products [structure: see text]. The 1,2-bis(dimethylgermyl)carborane 9 and 1,2-bis(dimethylstannyl)carborane 10 were prepared by the reaction of 1 and 2 with sodium cyanoborohydride. The reactions of 9 and 10 with Pd(PPh(3))(4) afforded the bis(germyl)palladium 12 and bis(stannyl)palladium 13 complexes, respectively.     

Azido- or hydroxyl-capped half-cubanes containing Cp*Rh fragments: [Cp*3Rh3(mu-X)3(mu3-X)]2+ (X-=OH- or N3-)

Treatment of [Cp*Rh(H(2)O)(3)](OTf)(2) (1) with Me(3)SiNH-t-Bu in acetone gave a hydroxyl-capped half-cubane [Cp*(3)Rh(3)(mu-OH)(3)(mu(3)-OH)](OTf)(3)(t-BuNH(3)) (2). Slow diffusion of Me(3)SiN(3) in diethyl ether into compound in acetone produced an azido-capped half-cubane [Cp*(3)Rh(3)(mu-N(3))(3)(mu(3)-N(3))](OTf)(2) (3). On the other hand, treating 1 with Me(3)SiN(3) in acetone gave an azido-bridged, dinuclear rhodium(III) complex [Cp*Rh(mu-N(3))(OH(2))](2)(OTf)(2) (4). Complexes 2 and 3 represent the first azido- or hydroxyl-capped, incomplete cubane-type Rh clusters. Under appropriate conditions, complexes 2 and 3 could be converted to complex 4. The structures of all products were determined by X-ray diffraction.     

Probing buried carbon nanotubes within polymer-nanotube composite matrices by atomic force microscopy

Multi-walled carbon nanotubes (MW-CNT) inside a polyamide-6 (PA6)-MW-CNT composite were visualized by atomic force microscopy (i) in a field-assisted intermittent contact and (ii) in the tunneling (TUNA) mode. Individual buried MW-CNTs were clearly discerned within the PA6 matrix. An average diameter of 33 ± 5 nm of the MW-CNTs was determined based on field-assisted intermittent contact mode AFM images, which is consistent with the expected size of PA6-coated MW-CNTs. Single well dispersed MW-CNTs that are located in the sub-surface region of the composite were also observed in the TUNA mode. These new AFM approaches circumvent the tedious sample preparation based on ultramicrotoming required for high resolution electron microscopy studies to obtain “in-depth” morphological information and hence are expected to facilitate the analysis of CNT-based and other nanocomposites in the future.