Synthesis and characterization of thermally crosslinkable hole‐transporting polymers for PLEDs

Two new thermally crosslinkable hole‐transporting polymers, X‐PTPA and X‐PCz, were synthesized via Yamamoto coupling reactions. The number‐averaged molecular weights (M_n) of X‐PTPA and X‐PCz were found to be 45,000 and 48,000, respectively, and therewith, polydispersity indices were of 1.8 and 1.7, respectively. Thermally crosslinked X‐PTPA and X‐PCz exhibit excellent solvent resistance and stable optoelectronic properties. The UV–visible maximum absorption peaks of X‐PTPA and X‐PCz in the thin film state are at 389 and 322 nm, respectively. The HOMO levels of X‐PTPA and X‐PCz are estimated to be ?5.27 and ?5.39 eV, respectively. Multilayered devices (ITO/crosslinked X‐PTPA or X‐PCz/SY‐PPV/LiF/Al) were fabricated with SY (SuperYellow) as the emitting layer. The maximum efficiency of the multilayered device with a crosslinked X‐PTPA layer is approximately three times higher than that of the device without a crosslinked X‐PTPA layer and much higher than that of the crosslinked X‐PCz device. This result can be explained by the observations that crosslinked X‐PTPA produces increased electron accumulation within the emitter, SY, and also efficient exciton formation due to improved charge balance. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5111–5117     

Plasma Characteristics of Internal Inductively Coupled Plasma Source with Ferrite Module

Electrical and plasma properties of a U-shaped internal inductively coupled plasma (ICP) source with/without a Ni-Zn ferrite module installed above the ICP antenna were investigated. By installing the ferrite module on the antenna, the increase of plasma density and the decrease of plasma potential could be observed. The increase of plasma density was related to the efficient inductive coupling to the plasma by concentrating the induced magnetic field between the antenna and the substrate. At 800 W of ICP power and 20mTorr Ar, a high density plasma on the order of 4.5′10¹¹/cm³ could be obtained.     

Synthesis and properties of phenothiazylene vinylene‐based polymers: New organic semiconductors for field‐effect transistors and solar cells

A series of new phenothiazylene vinylene‐based semiconducting polymers, poly[3,7‐(4′‐dodecyloxyphenyl)phenothiazylene vinylene] ( P1 ), poly[3,7‐(4′‐dodecyloxyphenyl)phenothiazylene vinylene‐alt‐1,4‐phenylene vinylene] ( P2 ), and poly[3,7‐(4′‐dodecyloxyphenyl)phenothiazylene vinylene‐alt‐2,5‐thienylene vinylene] ( P3 ), have been synthesized via a Horner‐Emmons reaction. FTIR and ¹H NMR spectroscopies confirmed that the configurations of the vinylene groups in the polymers were all‐trans (E). The weight‐averaged molecular weights (M_w) of P1 , P2 , and P3 were found to be 27,000, 22,000, and 29,000, with polydispersity indices of 1.91, 2.05, and 2.25, respectively. The thermograms for P1 , P2 , and P3 each contained only a broad glass transition, at 129, 167, and 155 °C, respectively, without the observation of melting features. UV–visible absorption spectra of the polymers showed two strong absorption bands in the ranges 315–370 nm and 450–500 nm, which arose from absorptions of the phenothiazine segments and the conjugated main chains. Solution‐processed field‐effect transistors fabricated from these polymers showed p‐type organic thin‐film transistor characteristics. The field‐effect mobilities of P1 , P2 , and P3 were measured to be 1.0 × 10^?4, 3.6 × 10^?5, and 1.0 × 10^?3 cm² V^?1 s^?1, respectively, and the on/off ratios were in the order of 10² for P1 and P2 , and 10³ for P3 . Atomic force microscopy and X‐ray diffraction analysis of thin films of the polymers show that they have amorphous structures. A photovoltaic device in which a P3 /PC₇₁BM (1/5) blend film was used as the active layer exhibited an open‐circuit voltage (V_OC) of 0.42 V, a short circuit current (J_SC) of 5.17 mA cm^?2, a fill factor of 0.35, and a power conversion efficiency of 0.76% under AM 1.5 G (100 mW cm^?2) illumination. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 635–646, 2010     

Stable Anticancer Gold(III)–Porphyrin Complexes: Effects of Porphyrin Structure

In the design of physiologically stable anticancer gold(III) complexes, we have employed strongly chelating porphyrinato ligands to stabilize a gold(III) ion [Chem. Commun. 2003 , 1718; Coord. Chem. Rev. 2009 , 253, 1682]. In this work, a family of gold(III) tetraarylporphyrins with porphyrinato ligands containing different peripheral substituents on the meso‐aryl rings were prepared, and these complexes were used to study the structure–bioactivity relationship. The cytotoxic IC₅₀ values of [Au(Por)]⁺ (Por=porphyrinato ligand), which range from 0.033 to >100 μM , correlate with their lipophilicity and cellular uptake. Some of them induce apoptosis and display preferential cytotoxicity toward cancer cells than to normal noncancerous cells. A new gold(III)–porphyrin with saccharide conjugation [Au(4‐glucosyl‐TPP)]Cl ( 2 a ; H₂(4‐glucosyl‐TPP)=meso‐tetrakis(4‐β‐D ‐glucosylphenyl)porphyrin) exhibits significant cytostatic activity to cancer cells (IC₅₀=1.2–9.0 μM ) without causing cell death and is much less toxic to lung fibroblast cells (IC₅₀>100 μM ). The gold(III)–porphyrin complexes induce S‐phase cell‐cycle arrest of cancer cells as indicated by flow cytometric analysis, suggesting that the anticancer activity may be, in part, due to termination of DNA replication. The gold(III)–porphyrin complexes can bind to DNA in vitro with binding constants in the range of 4.9×10⁵ to 4.1×10⁶ dm³ mol^?1 as determined by absorption titration. Complexes 2 a and [Au(TMPyP)]Cl₅ ( 4 a ; [H₂TMPyP]⁴⁺=meso‐tetrakis(N‐methylpyridinium‐4‐yl)porphyrin) interact with DNA in a manner similar to the DNA intercalator ethidium bromide as revealed by gel mobility shift assays and viscosity measurements. Both of them also inhibited the topoisomerase I induced relaxation of supercoiled DNA. Complex 4 a , a gold(III) derivative of the known G‐quadruplex‐interactive porphyrin [H₂TMPyP]⁴⁺, can similarly inhibit the amplification of a DNA substrate containing G‐quadruplex structures in a polymerase chain reaction stop assay. In contrast to these reported complexes, complex 2 a and the parental gold(III)–porphyrin 1 a do not display a significant inhibitory effect (<10 %) on telomerase. Based on the results of protein expression analysis and computational docking experiments, the anti‐apoptotic bcl‐2 protein is a potential target for those gold(III)–porphyrin complexes with apoptosis‐inducing properties. Complex 2 a also displays prominent anti‐angiogenic properties in vitro. Taken together, the enhanced stabilization of the gold(III) ion and the ease of structural modification render porphyrins an attractive ligand system in the development of physiologically stable gold(III) complexes with anticancer and anti‐angiogenic activities.     

1-Boryl-3,4-dimethylphosphole trimer: Synthesis, crystal structure and quantum chemical calculations

A novel cycloadduct of 1-boryl-3,4-dimethylphosphole was prepared by reaction of 3,4-dimethylphospholyl anion with monobromoborane-methylsulfide complex (CH₃)₂S · BH₂Br at −60 °C. It was characterized as a six-membered trimer by spectroscopic means, and its structure confirmed by an X-ray crystal analysis and quantum chemical calculations. Density functional theory calculations (B3LYP) showed that the cyclic trimer is by far more stable than the monomer, dimers or open-chain forms. Various molecular and spectroscopic properties of the borylphosphole monomer and trimer were evaluated. In particular, the changes of the ³¹P NMR chemical shifts upon oligomerization were examined. The six-membered ring was demonstrated to exist preferentially in a chair-like conformation. Computed NMR chemical shifts (¹H, ¹³C and a lesser extent ³¹P) appear to be a highly sensitive analytical tool for distinguishing ring conformations having only small energy differences.     

Ways of talking and ways of positioning: Students’ beliefs in an inquiry-oriented differential equations class

As part of developmental research for an inquiry-oriented differential equations course, this study investigates the change in students’ beliefs about mathematics. The discourse analysis has identified two different types of perspective modes - i.e., discourse of the third-person perspective and discourse of the first-person perspective - in the students’ mathematical narratives, depending on their ways of positioning themselves with respect to mathematics. In the third-person perspective discourse, the students positioned themselves as passive recipients of mathematics that has been established by some external authority. In the first-person perspective discourse, the students positioned themselves as active mathematical inquirers and produced mathematics by interweaving their own mathematical ideas and experiences. Over the semester, students’ mathematical discourse changed from third-person perspective narratives to first-person perspective narratives. This change in their discourse pattern is interpreted as an indication of change in their beliefs about mathematics. Finally, this article discusses the instructional features that promote the change.     

Numerical solution of Navier–Stokes equations using multiquadric radial basis function networks

A numerical method based on radial basis function networks (RBFNs) for solving steady incompressible viscous flow problems (including Boussinesq materials) is presented in this paper. The method uses a ‘universal approximator’ based on neural network methodology to represent the solutions. The method is easy to implement and does not require any kind of ‘finite element‐type’ discretization of the domain and its boundary. Instead, two sets of random points distributed throughout the domain and on the boundary are required. The first set defines the centres of the RBFNs and the second defines the collocation points. The two sets of points can be different; however, experience shows that if the two sets are the same better results are obtained. In this work the two sets are identical and hence commonly referred to as the set of centres. Planar Poiseuille, driven cavity and natural convection flows are simulated to verify the method. The numerical solutions obtained using only relatively low densities of centres are in good agreement with analytical and benchmark solutions available in the literature. With uniformly distributed centres, the method achieves Reynolds number Re = 100 000 for the Poiseuille flow (assuming that laminar flow can be maintained) using the density of , Re = 400 for the driven cavity flow with a density of and Rayleigh number Ra = 1 000 000 for the natural convection flow with a density of . Copyright © 2001 John Wiley & Sons, Ltd.     

Hydrogenated Graphene and Hydrogenated Silicene: Computational Insights

Density functional calculations are performed to study the energetic, structural, and electronic properties of graphene and silicene functionalized with hydrogen. Our calculations predict that H atoms bind much more strongly to silicene than to graphene. The adsorbed H atoms tend to cooperatively stabilize each other leading to a two‐dimensional nucleation and growth mechanism. The different structural and electronic modifications induced by H in fully functionalized graphene and silicene (known as graphane and silicane) are also explained. Finally, the electronic properties of defective graphane with multiple hydrogen vacancies are investigated. Engineering the vacancies in graphane offers a way to modify the electronic properties of this material.