Generation and propagation of a picosecond acoustic pulse at a buried interface: time-resolved x-ray diffraction measurements

We report on the propagation of coherent acoustic wave packets in (001) surface oriented Al0.3Ga0.7As/GaAs heterostructure, generated through localized femtosecond photoexcitation of the GaAs. Transient structural changes in both the substrate and film are measured with picosecond time-resolved x-ray diffraction. The data indicate an elastic response consisting of unipolar compression pulses of a few hundred picosecond duration traveling along [001] and [001] directions that are produced by predominately impulsive stress. The transmission and reflection of the strain pulses are in agreement with an acoustic mismatch model of the heterostructure and free-space interfaces.     

Intertwined electronic and structural phase transitions in the In/Si(111) interface

The structural (4 x 1) to (8 x 2) transition and the electronic metal to semimetal transition at the In/Si interface are studied with scanning tunneling microscopy and spectroscopy. Both transitions are gradual, resulting in a complex domain structure in the transition temperature regime. At these intermediate temperatures, the metallic (4 x 1) and semimetallic (8 x 2) domains coexist with each other and with new nanophases. By probing the two intertwined but distinguishable transitions at the atomic level, the interaction between different phases is visualized directly.     

Advantages of Adaptive Speckle Filtering Prior to Application of Iterative Deconvolution Methods for Optical Coherent Tomography Imaging

The axial resolution of optical coherence tomography (OCT) is closely related to the light source spectrum width. Unfortunately, most basic sources providing the required power for decent OCT image have narrow spectra, which generate a resolution loss. Assuming the OCT system is linear shift-invariant, we can consider the system output as the convolution of the theoretical signal with a system impulse response due to this spectrum narrowness. It becomes then possible to enhance this resolution through iterative deconvolution methods (IDM). However those methods have a significant drawback, as they usually significantly enhance speckle, which is another consequence of the source spectrum narrowness. To compensate this, we rely on preliminary speckle filtering, and especially the adaptative ones, which allow tackling the speckle without blurring the image. We first studied enhancement proposed by most popular IDMs on OCT images, and then the effect of preliminary adaptive speckle filtering (ASF) by different common adaptive methods. Then, among those methods, we combined Frost filter and Richardson-Lucy deconvolution in the appropriated way; this way we both enhanced resolution by 2 and reduced speckle (raising CNR from 0.7 to 1.3)     

The effect of substrate heating on the tunability of rf-sputtered Bi2O3-ZnO-Nb2O5 thin films

Reactively rf-sputtered Bi₂O₃-ZnO-Nb₂O₅ (BZN) thin films were prepared on Pt(111)/TiO₂/SiO₂/Si with substrate heating. The effects of substrate heating on the structures, morphologies, dielectric properties, and voltage-tunable dielectric properties of the films were investigated. With heating, the BZN thin films could be deposited in crystalline form as the cubic pyrochlore phase. The amounts of secondary phases, such as zinc niobate and bismuth niobate, depended on the substrate temperature. The more compounding of the BZN crystalline phase proceeded at deposition, the less formation of secondary phases and stoichiometric change occurred after post-annealing. Therefore, improvement of the dielectric constant and tunability of thin films by grain-size enlargement might be possible with proper substrate heating and post-annealing. The BZN thin films sputtered with a substrate temperature of 550 °C and annealed at 800 °C showed a maximum tunability of 26.5% at a dc bias field of 1000 kV/cm and measurement frequency of 1 MHz. PACS 81.15.Cd; 77.55.+f; 77.84.Dy; 81.40.Tv     

Investigations on PMMA-PVdF polymer blend electrolyte with esters of dibenzoic acids as plasticizers

Plasticizers can be used to change the electrical and mechanical properties of polymer electrolytes by reducing the degree of crystallinity and lowering the glass transition temperature. The transport properties of gel type ionic conducting membranes consisting of poly (methyl methacrylate) (PMMA), poly (vinylidene fluriode) (PVdF), Lithium perchlorate (LiClO₄) and dioctyl phthalate (DOP), dibutyl phthalate (DBP), dimethyl phthalate (DMP) or diethyl phthalate (DEP) were studied. The polymer films were characterized by X-ray diffraction, Thermal, Fourier transform infrared and impedance spectroscopic studies. It is found that the addition of DMP as the plasticizer in the PMMA / PVdF-LiClO₄ polymer complex favours an enhancement in ionic conductivity. The temperature dependence of the conductivity of the polymer films seems to obey the VTF relation. The conductivity values are presented and the results are discussed.     

Photoluminescence of ZnO nanowires grown on sapphire (1 1 2¯ 0) substrates

ZnO nanowires were fabricated on c-plane (0 0 0 1), a-plane (1 1 2¯ 0) sapphire, and boron doped p-type (1 0 0) Si substrates in vacuum furnace by simple physical vapor deposition. Room temperature photoluminescence spectra of the nanowires show the near band-edge emission and the deep-level green light emission. The ZnO nanowires formed on sapphire (1 1 2¯ 0) substrates exhibited enhancement on optical properties and better crystalline structures than those of nanowires grown on other substrates. The formation mechanism and the effect of substrate direction on structural and optical properties of the nanowires are discussed.     

Comment on “An enhanced polarization mechanism for the metal cations modified amorphous TiO2 based electrorheological materials” by Qing Wu, Bin Yuan Zhao, Chen Fang and Ke Ao Hu

Comments on a recent article on an enhanced polarization mechanism for the metal cations modified amorphous TiO₂ based electrorheological materials are presented, based upon an examination of the yield stress, which is a function of electric-field strength, of the materials. Using the deduced critical electric-field strengths, we find that the universal yield stress equation proposed collapses the data given by Qing Wu, Bin Yuan Zhao, Chen Fang, Ke Ao Hu, Eur. Phys. J. E 17, 63 (2005), onto a single curve.     

Native oxide buried InAlAs ridge waveguide laser diode

InAlAs wet thermal oxidation process was adopted to fabricate ridge waveguide laser diodes. First, applying the oxidation process on the whole etched surface of an InAlAs upper cladding layer, we formed a current blocking and optical confining layer of ridge waveguide laser diode. This is a self-aligned structure, which makes the laser diode fabrication steps much simpler and etching-depth control less important. Assessment of the fabricated laser diode revealed that current-voltage characteristics and slope efficiency did not worsen, and threshold current was reduced by the oxidation process. PACS 85.35.Be; 42.55.Px     

Simultaneous Determination of Acetylsalicylic Acid and Caffeine in Pharmaceutical Formulation by First Derivative Synchronous Fluorimetric Method

A sensitive, rapid, and specific assay has been developed for the simultaneous determination of acetylsalicylic acid and caffeine in commercial tablets based on their natural fluorescence. The mixture of these drugs was resolved by first derivative synchronous fluorimetric technique using two scans. At Δλ=106 nm, using first derivative synchronous scanning, only acetylsalicylic acid yields a detectable signal at 316 nm (peak to zero method) which is unaffected by caffeine. At Δλ=30 nm, the signal of caffeine at 288 nm (peak to zero method) is not affected by acetylsalicylic acid. The range of application is between 0.021 and 41.62 μg ml⁻¹ (correlation coefficient, R=0.9995) for acetylsalicylic acid and between 0.4486 and 44.86 μg ml⁻¹ (correlation coefficient, R=0.99786) for caffeine. The recovery range of 98.40–102% for acetylsalicylic acid and 90–100.5% for caffeine from their synthetic mixture was reported. Overall recovery of both compounds about 97–99% for acetylsalicylic acid and 97–98% for caffeine was obtained from real sample analysis. The detection limits are 0.0013 μg ml⁻¹ and 0.0306 μg ml⁻¹ for acetylsalicylic acid and caffeine, respectively. The relative standard deviation (n=10) for 20 μg ml⁻¹ of acetylsalicylic acid is 2.75% and for 2.2 μg ml⁻¹of caffeine is 1.7%.     

Fabrication of patterned gold electrodes with spin-coated-and-fired Au(1 1 1) film by the soft lithography

We prepared high quality Au(1 1 1) film on Si wafer through the spin coating and thermal decomposition of a gold ink, spin-coated-and-fired (SCAF) Au film. The X-ray measurements, XRD and pole-figure analysis, showed that the SCAF Au film has a (1 1 1) out-of-plane orientation with a random in-plane orientation. In order to confirm the chemical activity of the SCAF Au film, we demonstrate the formation of patterned structures with the film by using soft lithography technique. The chemical activities of this physically stable SCAF Au film to the alkanethiols were at least equivalent those of physically deposited the Au films. The possibility of the mass production of micro patterned structure with the SCAF Au film was also demonstrated over the wide region on Si wafer by the microcontact lithography. These suggest that the Au film will help the easy fabrication of various nanosized devices on Si wafer and other substrates.