Copolymerization characteristics of S-vinyl-O-tert-butylthiocarbonate

Poly-S-vinyl-O-tert-butylthiocarbonate is an excellent precursor to poly(vinyl mercaptan) because the tert-butyloxycarbonyl blocking group can be removed by either acid hydrolysis or thermolysis under conditions which minimize the oxidation of the liberated mercaptan to disulfide. Dilatometric studies of the homopolymerization of S-vinyl-O-tert-butylthiocarbonate demonstrated that the polymerization rate was directly proportional to the concentration of free-radical initiator; no thermal initiation was observed. The molecular weight of the homopolymers and copolymers ranged from 30,000 to 50,000 (GPC). Copolymerization of S-vinyl-O-tert-butylthiocarbonate (M₂) with styrene, (r₁ = 3.0, r₂ = 0.2), methyl methacrylate (r₁ = 1.40, r₂ = 0.17) and vinyl acetate (r₁ = 0.04, r₂ = 11.0) indicated that a sulfur atom adjacent to the vinyl group increases the resonance stability (Q₂ = 0.5) and the electron density (e₂ = ?1.4) of the double bond and the corresponding radical. Water-soluble copolymers could be prépared by incorporating either N-vinylpyrrolidone (r₁ = 0.12, r₂ = 3.94) or N-isopropylacrylamide (r₁ = 1.17, r₂ = 0.3) with M₂. The water solubility of the copolymers decreased markedly when the tert-butyloxycarbonyl group was removed. Copolymers of M₂ with N-vinyl-O-tert-butylcarbamate (r₁ = 0.13, r₂ = 5.10) were utilized to prepare crosslinked poly(vinyl amine–vinyl mercaptan); the crosslinking resulted from urea linkages formed during thermolysis of the copolymer.     

A Facile Construction of the Quadranoid Skeleton: Application to the Total Synthesis of (+/-)-Suberosenone

A tandem free radical cyclization-rearrangement sequence was designed and executed to produce tricyclo[4.3.2.0(1,5)]undecane 7 from cyclopentene 6A in a single operation. The total synthesis of suberosenone was accomplished from 7.     

Detection of vibration-rotational band 5-0 of 12C16O X 1sigma+ with cavity ringdown absorption near 0.96 microm

We have recorded extremely weak absorption in the overtone band 5-0 of 12C16O X 1sigma+ near 0.96 microm with cavity ringdown spectroscopy; the light source was a Raman-shifted dye laser pumped with a frequency-doubled Nd:YAG laser. This band shows lines in branch P to be much more intense than corresponding lines in branch R, in contrast to all lower overtone bands v-0 (v = 1-4). This reversal in relative intensity is explained quantitatively in terms of a radial function for the electric dipolar moment of CO. We have estimated absorption line strengths for P3-P18 in band 5-0 of 12C16O; these strengths are consistent with a pure vibrational matrix element <5/p(x)/0> = (3.6 +/- 0.3) x 10(-36) C m of the electric dipolar moment p(x), a Herman-Wallis coefficient C0(5) of about -0.1, and a band strength of (5.1 +/- 1.3) x 10(-29) m at 293 K.     

Conformational and Configurational Determination in 1,1,4,4-Tetrafluoro-2-Propylidene-3-Methyl-6-Tert-Butyl-1,4-Disila-5-Cyclohexene

A complete assignment of the ¹H, ¹³C and ¹⁹F NMR spectra of 1,1,4,4-tetrafluoro-2-propylidene-3-methyl-6-tert-butyl-1,4-disila-5-cyclohexene 3, the product of the cycloaddition reaction between tetrafluorodisilacyclobutene 1 and cis, trans-2,4-hexadiene mediated by (n⁵-C₅H₅)Mn(CO)₃, has been made by means of various 2D NMR chemical shift correlation methods and selective heteronuclear decoupling techniques. An analysis of the three bond ¹³C-¹H coupling constants and two bond ¹³C-¹⁹F coupling constants and the molecular modeling results enabled the determination of the conformation and configuration of compound 3. The conformation of 3 provides insight into mechanistic details of the Mn-mediated cycloaddition.     

Ligand exchange reactions of ferrocene with phenanthrene or 9,10-dimethylphenanthrene in the presence of aluminum chloride and aluminum

Ligand exchange reactions between phenanthrene or 9,10-dimethylphenanthrene with ferrocene effected in the presence of AlCl₃-Al were carried out under a variety of conditions. With phenanthrene (I), hydrogenation at the C-9 and C-10 positions could take place during the reaction and the cationic products obtained were the η⁶-phenanthrene-η⁵-cyclopentadienyliron and η⁶-9,10-dihydro-phenanthrene-η⁵-cyclopentadienyliron moncations (II and III), and the η⁶-phenanthrene-$\text{trans}$-$\text{bis}$-η⁵-cyclopentadienyliron and η⁶-9,10-dihydrophenanthrene-$\text{trans}$-$\text{bis}$-η⁵-cyclopentadienyliron dications (IV and V). With 9,10-dimethylphenanthrene (VI), reactions carried out in refluxing cyclohexane gave the non-hydrogenated η⁶-9,10-dimethylphenanthrene-η⁵-cyclopentadienyliron monocation (VII) and η⁶-9,10-dimethylphenanthrene-$\text{trans}$-$\text{bis}$-η⁵-cyclopentadienyliron dication (VIII). When higher temperatures were used in an attempt to promote hydrogenation, decomposition predominated and no cationic product could be obtained. These finding are discussed and contrasted with previous results obtained from similar reactions using anthracene or 9,10-dimethylanthracene.     

Triazine chemistry VIII. 2,5-dihydro-5-oxo-1,2,4-triazines

2,5-Dihydro-5-oxo-1,2,4-triazine and some of its alkylated derivatives have been prepared. Nmr spectroscopic analysis has established that the 2,5-dihydro-5-oxo tautomers are preferred over the 4,5-dihydro-5-oxo ones. This preference, and the behavior of 1,2,4-triazines in some other chemical reactions has been interpreted in terms of electron-electron repulsions between the lone pairs of electrons of N₁ and N₂ in this ring system.     

Preparation of Y2Ba4Cu7O15-δ Superconductor without High Oxygen Pressure

The synthesis of bulk Y₂Ba₄Cu₇O_15-δ superconductor at atmospheric oxygen pressure via solid state sintering is reported. Temperature ranging from 860 to 890 °C as well as time interval over 2 to 15 days were used to investigate the formation of the Y₂Ba₄Cu₇O_15-δ phase. A time-temperature profile characterizing the conditions for the preparation of Y₂Ba₄Cu₇O_15-δ phase suggests the optimal condition to be sintering at 890 °C for over 10 days. Detailed results of X-ray diffraction, electrical resistivity, iodometric titration and magnetization measurements are described.     

Triorganosilyl Ethers of Benzaldehyde,m-Methoxybenzaldehyde and Anisoles

Synthesis of six new triorganosiloxybenzaldehydes, two m-methoxy-(triorganosiloxy)benzaldehydes, and seven methoxy(triorganosiloxy)benzenes are reported. From comparison of the stability of these compounds in the atmosphere, it is concluded that formyl group shows unfavorable influence and methoxy group shows favorable influence on the stability of these compounds. The oposite influences of these two groups on phenoxysilane linkage seems to connect with the oposite directiones of inductive effect of formyl group and resonance effect of methoxy group on the benzene ring.     

Ligand exchange reactions with η6-arene-η5-cyclopentadienyliron cations under thermal or photochemical conditions

Reactions of various η⁶-arene-η⁵-cyclopentadienyliron or substituted cyclopentadienyliron cations with trimethyl, triethyl or triphenyl phosphite under either thermal or photochemical conditions all resulted in the replacement of the arene ligand with three phosphite ligands to give η⁵-tris(trimethyl, triethyl or triphenyl phosphite)-η⁵-cyclopentadienyliron or substituted cyclopentadienyliron cations. The yields of the phosphite complexes were higher from photolysis than from the analogous thermolysis. Photolysis of the η⁶-chlorobenzene-η⁵-cyclopentadienyliron cation (IX) carried out in the presence of a more basic or more electron-rich aromatic ligand resulted in the exchange of the chlorobenzene of IX with the more basic arene, thus providing synthetic routes to cyclopentadienyliron complexes that may be difficult to prepare by other means. New complexes synthesized in this way are the η⁶-2-phenylethyl tosylate-η⁵-cyclopentadienyliron cation and the CpFe⁺ complexes of thiophene, 2-methylthiophene, 3-methylthiophene and 2,5-dimethylthiophene.     

Metastasis-suppressor KAI1/CD82 induces homotypic aggregation of human prostate cancer cells through Src-dependent pathway

To investigate the functional role of KAI1/CD82, a metastasis suppressor for human prostate cancer, in the regulation of homotypic cell adhesion, we transfected KAI1 cDNA into DU 145 human prostate cancer cells and established stable transfectant clones with high KAI1/CD82 expression. The KAI1 transfectant cells exhibited significantly increased homotypic cell aggregation in comparison with the control transfectant cells. This aggregation of the KAI1 transfectants was further enhanced upon exposure to anti-CD82 antibody, suggesting that KAI1/CD82 may be involved in the intracellular signaling for the cell adhesion. Among several signal pathway inhibitors tested, PP1, an inhibitor of Src family kinases, significantly suppressed homotypic aggregation of the KAI1 transfectant cells. Ligation of KAI1/CD82 with anti-CD82 antibody increased endogenous Src kinase activity of the KAI1 transfectant cells. When different types of src expression constructs were retransfected into the KAI1-transfected DU 145 cells, kinase-negative mutant src transfectant cells exhibited much lower homotypic aggregation than the mock cells transfected with an empty vector. Moreover, homotypic aggregation of the mutant src transfectant cells was not enhanced by KAI1/CD82 ligation with anti- CD82 antibody. These results suggest that Src mediates the intracellular signaling pathway of KAI1/CD82 for the induction of homotypic adhesion of human prostate cancer cells.