Equilibrium studies of the sorption of Cu(II) ions onto chitosan

Chitosan is a polymer that can be obtained from the shells of seafood such as prawns, crabs, and lobsters. Chitosan has free amino groups, which can attract metal ions, and has been used as an adsorbent for the removal of metal ions from effluents. In this research, the sorption of copper ions from solution onto chitosan at two pHs has been investigated. DSC, TGA, surface area, SEM, and NMR studies have been used to report the pure physical states of chitosan and the chitosan-copper complex. The experimental isotherm data were analyzed using the Langmuir, Freundlich, and Redlich-Peterson equations. Correlation coefficients were determined for each isotherm analysis. Error functions have been used to determine the alternative single component parameters by nonlinear regression due to the inherent bias in using the correlation coefficient resulting from linearization. The error function method provided the best parameters for the isotherm equations in this system and is demonstrated for error comparison purposes.     

The kinetics of hydrogen peroxide initiated polymerisation of methacrylamide

A kinetic study of the aqueous polymerisation of methacrylamide initiated by hydrogen peroxide has shown that the polymerisation proceeds in two stages. The rate of polymerisation up to about 16% conversion is represented by the equation

Within this period, the hydrogen peroxide is completely consumed and a hydroperoxide of methacrylamide is formed. Subsequently this hydroperoxide initiates polymerisation.     

Systematic optimization of micellar electrokinetic chromatographic separation of flavonoids

Summary A simple and rapid systematic optimization scheme was described for the micellar electrokinetic chromatographic separation of a group of flavonoids. The scheme employed an interpretative optimization approach to predict the optimum conditions for the separation of a group of flavonoids by micellar electrokinetic chromatography. By performing a set of nine pre-planned experiments conducted over the maximum working range for the system, global optimum separation conditions could be determined. To validate the optimization procedure, additional experiments were performed using the optimum experimental conditions derived from the optimization scheme. The results showed that satisfactory separation of all the peaks could be obtained. In addition, the application of the method in micropreparative micellar electrokinetic chromatography of the flavonoids was demonstrated.     

Simple alkenes as substitutes for organometallic reagents: nickel-catalyzed, intermolecular coupling of aldehydes, silyl triflates, and alpha olefins

A nickel-catalyzed method for the three-component coupling of alkenes (ethylene and alpha olefins), aldehydes, and silyl triflates is described, and this process represents the first catalytic method for coupling aldehydes and alkenes to give allylic alcohol derivatives. Conceptually, the alkene functions as a replacement for an alkenylmetal reagent.     

In-situ derivatisation of degradation products of chemical warfare agents in water by solid-phase microextraction and gas chromatographic-mass spectrometric analysis

A new analytical procedure was developed for the extraction of degradation products of chemical warfare agents from water and for in-situ derivatisation prior to analysis by gas chromatography-mass spectrometry (GC-MS). With this new procedure, degradation products of the chemical warfare agents can be analysed and identified without going through laborious sample preparation. Parameters such as fiber selection, pH, salt content, derivatisation temperature, extraction and derivatisation periods, and sequence of adsorption/derivatisation were experimented with, to optimise the efficiency of this method. The detection limit is in the ppb to sub-ppb range with GC-MS in the full scan mode. Based on six injections of the devised procedure, a relative standard deviation from 10-35% can be achieved, depending on the compound. This method was demonstrated during the 4th International Interlaboratory Proficiency Test organised by the Organisation for the Prohibition of Chemical Weapons to be comparable to existing recommended operating procedures for verification of degradation products of chemical warfare agents.     

Speciation analysis of tellurium by solid-phase extraction in the presence of ammonium pyrrolidine dithiocarbamate and inductively coupled plasma mass spectrometry

Under acidic conditions tellurium(IV) formed a complex with ammonium pyrrolidine dithiocarbamate (APDC). The tellurium(IV) complex was completely retained on a non-polar Isolute silica-based octadecyl (C(18)) sorbent-containing solid-phase extraction (SPE) cartridge, while the uncomplexed Te(VI) passed through the cartridge and remained as a free species in the solution. Only partial Te(IV) was retained on the SPE cartridge for samples without addition of APDC. On the basis of different retention behaviours of the complexed Te(IV) and uncomplexed Te(VI), a simple and highly sensitive method is proposed for the determination of total tellurium and Te(VI) by SPE separation and inductively coupled plasma mass spectrometry (ICP-MS) detection. The Te(IV) concentration was calculated as the difference between total tellurium and Te(VI) concentrations. The detection limit (3 sigma) is 3 ng L(-1) tellurium. Factors affecting the separation and detection of tellurium species were investigated. Coexisting ions did not show significant interferences with the Te(IV)-APDC complex retention and the subsequent ICP-MS detection of Te. The method has been successfully applied to the tellurium speciation analysis in waters with spiked recoveries for Te(IV) and Te(VI) of 86.0-108% and 87.1-97.4%, respectively.     

Chiral conflict. The effect of temperature on the helical sense of a polymer controlled by the competition between structurally different enantiomers: from dilute solution to the lyotropic liquid crystal state

Helical polymers appended with paired structurally different enantiomers, which have opposing helical sense preferences, yield a new kind of relationship between optical activity and temperature, and also reveal unusual details of the nature of chiral interactions. Consistent with a statistical physical theory developed for these experiments, the proportion of the competing chiral groups, determined by synthesis, fixes the compensation temperature at which the helical senses are equally populated. The lyotropic liquid crystal state formed by these polymers yields therefore a nematic state at any chosen temperature over a very wide range, with a cholesteric state arising with tightening pitch as temperature deviates from this point. Far from the nematic temperature, the pitch reaches the nanometer scale and therefore the reflection of visible light. Before crossing zero at the nematic temperature, the optical activity becomes so large that it may be observed with the unaided eye through crossed polarizers.     

Antimony speciation by inductively coupled plasma mass spectrometry using solid phase extraction cartridges

A novel and simple method for inorganic antimony speciation is described based on selective solid phase extraction (SPE) separation of antimony(III) and highly sensitive inductively coupled plasma mass spectrometric (ICP-MS) detection of total antimony and antimony(V) in the aqueous phase of the sample. Non-polar SPE cartridges, such as the Isolute silica-based octyl (C8) sorbent-containing cartridge, selectively retained the Sb(III) complex with ammonium pyrrolidine dithiocarbamate (APDC), while the uncomplexed Sb(V) remained as a free species in the solution and passed through the cartridge. The Sb(III) concentration was calculated as the difference between total antimony and Sb(V) concentrations. The detection limit was 1 ng L(-1) antimony. Factors affecting the separation and detection of antimony species were investigated. Acidification of samples led to partial or complete retention of Sb(V) on C8 cartridge. Foreign ions tending to complex with Sb(III) or APDC did not interfere with the retention behavior of the Sb(III)-APDC complex. This method has been successfully applied to antimony speciation of various types of water samples.     

Patterned and controlled polyelectrolyte fractal growth and aggregations

Two-dimensional patterned and controlled polyelectrolyte aggregations (e.g., tree-like ramified structures) created by microcontact printing have been demonstrated and discussed. Polyelectrolyte-micropatterned aggregations on surfaces were controlled by the micropattern size and shape of PDMS stamps. The formation of aggregates was dependent on the ink and surface conditions, and the aggregates consisted of two distinct layers; strongly adsorbed, primary uniform layers and weakly adsorbed, secondary aggregation layers positioned on top of the primary layers. The adsorption of the primary layers was strong enough not to be washed away, while the aggregated secondary layers were easily removed by washing. The aggregation of secondary layers showed typical tree-like ramified structures of fractal growth and aggregation. Directional and confined stamping led to directing and confining the growth of the fractal polyelectrolyte clusters, respectively. The micropatterned primary uniform layers were not removed by extensive washing, and they were identified by selective nickel plating and charged particle selective adsorption in which the surface formed positive and negative micropatterns. These functional and patterned surfaces have great potentials for advanced devices and sensors.     

Persulphate initiated polymerisation of methacrylamide—I: Kinetics and molecular weight dependences

A kinetic study of the aqueous persulphate initiated polymerisation of methacrylamide has shown that the rate of polymerisation is represented by the equation $\text{R}{}_{\mathrm{p}}\text{= k [}\text{M}\text{] [}\text{I}\text{]}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}$ where the overall rate constant, $\text{k = 1.3 × 10}{}^9\text{exp}\text{(?18,400/}\text{RT}\text{) 1}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{mol}{}^{\mathrm{<mtext>?</mtext><mtext>1</mtext><mtext>2</mtext>}}\text{s}{}^{\mathrm{?1}}$. Chain transfer with monomer, where C_M = 5.4 × 10^?3 at 60°, is shown to be the dominant transfer step. Comparison with kinetic studies of the analogous acrylamide polymerisation shed doubt on the ‘cage effect’ interpretation of complex orders with respect to monomer. An alternative explanation is proposed.