Structural and spectroscopic properties of trans-difluoro(1,4,8,12-tetraazacyclopentadecane)chromium(III) perchlorate hydrate

The structure of [CrF(2)([15]aneN(4))]ClO(4).H(2)O ([15]aneN(4)=1,4,8,12-tetraazacyclopentadecane) has been determined by a single-crystal X-ray diffraction study at 173 K. The complex crystallizes in the space group P1- of the triclinic system with two mononuclear formula units in a cell of dimensions a=9.6117(7) A, b=10.2882(7) A, c=11.0001(7) A and alpha=99.7570(10) degrees, beta=105.6080(10) degrees and gamma=113.7130(10) degrees. The complex cation unit has its central Cr atom in an octahedral coordination with four nitrogen atoms and two fluorine atoms in a trans position. Three six-membered and one five-membered chelate rings of the [15]aneN(4) ligand are in a chair-twist(skew)-chair-gauche conformation sequence. The gauche five-membered ring is disordered with the twist six-membered ring opposite. The four H atoms in the chiral N atoms have the trans-II (CTCg) type configuration. The mean Cr-N and Cr-F bonds are 2.095(2) and 1.8752(13) A, respectively. The IR and visible spectral properties are consistent with the result of X-ray crystallography. The resolved band maxima of the electronic d-d spectrum are fitted with secular determinant for quartet state energy of d(3) configuration in tetragonal field including configurational but neglecting spin-orbit coupling. It is confirmed that the fluoride has strong sigma- and pi-donor properties toward the chromium(III) ion and the nitrogen atoms of the [15]aneN(4) ligand also have a strong sigma-donor character.     

Morphology of polythiophene and polyphenyl films produced via surface polymerization by ion-assisted deposition

Conducting polymer films are grown by either mass-selected or non-mass-selected, hyperthermal thiophene ions coincident on a surface with a thermal beam of organic monomers of either alpha-terthiophene (3T) or p-terphenyl (3P) neutrals. Previous experiments verified polymerization of both 3T and 3P by 200 eV C(4)H(4)S(+) during surface polymerization by ion-assisted deposition (SPIAD). A wide variety of structures are observed by scanning electron microscopy to form in the SPIAD polythiophene and polyphenyl films. These structures include microscale islands, lamellar structures, fractal-like growth patterns, and nanoscale crystallites. Some of the deposited films diffract X-rays while others show electron micrographs of crystallites. The variation of these patterns with deposition conditions clearly indicate that ion-induced polymerization mediates film morphology through control of ion energy and ion/neutral ratio. Furthermore, these ion-assisted events mediate important thermal processes such as sublimation.     

Pt immobilization on TiO2‐embedded carbon nanofibers using photodeposition

Currently, the use of fuel cell electrodes containing Pt catalysts has been limited due to technological problems in this system, primarily the system's high cost. The improvement of Pt catalyst use has been achieved by changes in the Pt immobilization method. In this study, we have studied Pt immobilization on carbon nanofiber composites using the photodeposition method. First, we prepared the carbon nanofibers, which were homogeneously embedded TiO₂ using the electrospinning technology. These TiO₂‐embedded carbon nanofiber composites (TiO₂/CNFs) were then immersed in a Pt precursor solution and irradiated with UV light. The obtained Pt‐deposited TiO₂/CNFs contained Pt that was immobilized on the carbon nanofibers, and the Pt particle size was 2‐5 nm. The XPS spectra showed that the amount of Pt increased with an increasing UV irradiation time. The current densities and total charge also increased with an increase in the UV irradiation time, possibly due to an increase of active specific area by finely dispersed Pt nanoparticles. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Temperature‐dependent Raman scattering study of multiferroic MnWO4

We have measured polarized Raman spectra of MnWO₄ single crystals at low temperatures, and studied the temperature dependence of the various phonon modes. From our Raman studies of the MnWO₄, a new transition temperature, ∼180 K, was found. We have completely assigned the symmetries of the 18 observed Raman modes of the MnWO₄, as expected from a group theoretical analysis. These Raman modes have been classified into three groups according to weak, intermediate and strong temperature dependence of the modes in each group. Six internal modes have been identified by their weak temperature dependence of the Raman wavenumbers. The temperature dependence of the wavenumbers of the B_g modes in Mg O bonds, modes of intermediate temperature dependence group, shows an anomalous behavior under 50 K. The phonon modes of strong temperature dependence show an anomalous change at ∼180 K in the linewidths. This is believed to be a new transition temperature which involves the changes in the inter‐WO₆ octahedra structure. Copyright © 2009 John Wiley & Sons, Ltd.     

Management of branch-duct intraductal papillary mucinous neoplasms of the pancreas: observation with MR imaging

Purpose

To evaluate the clinical outcomes of conservative management by observation with MRI of patients with branch-duct intraductal papillary mucinous neoplasms (BD-IPMNs).

Materials and Methods

Twenty-three consecutive patients, who were followed up by MRI with magnetic resonance cholangiopancreatography (MRCP) over a period of more than 9 months after initial MRI examinations, were enrolled in this study. On MRI, number of lesions, the maximum diameter of BD-IPMNs, lesion location, the presence of associated dilatation of main pancreatic duct (MPD), the presence of enhancing mural nodules within the lesion and the presence of interval change were retrospectively reviewed on initial and follow-up MR images in consensus by two radiologists. All patients were evaluated to search for evidence of malignant progression of disease.

Results

The follow-up period ranged from 10 to 96 months (mean, 37 months). On initial MRI with MRCP, a total of 39 lesions were found in 23 patients. The maximum diameter of BD-IPMNs ranged between 6 and 32 mm, with a mean of 12 mm. Thirty-four lesions (87%) of 19 patients remained unchanged in the maximum diameter. Five lesions (13%) of four patients showed an increase in the maximum diameter. Enhancing mural nodules were not found in any individual, neither on the initial MRI study nor on the follow-up studies. There was no patient who had evidence of local aggressive growth of tumor or evidence of metastases to distant sites.

Conclusion

Our study suggests that branch-duct IPMNs without enhancing mural nodules are essentially benign and should be managed nonoperatively through observation by MRI.     

In vivo high‐resolution synchrotron radiation imaging of collagen‐induced arthritis in a rodent model

In vivo microstructures of the affected feet of collagen‐induced arthritic (CIA) mice were examined using a high‐resolution synchrotron radiation (SR) X‐ray refraction technique with a polychromatic beam issued from a bending magnet. The CIA models were obtained from six‐week‐old DBA/1J mice that were immunized with bovine type II collagen and grouped as grades 0–3 according to a clinical scoring for the severity of arthritis. An X‐ray shadow of a specimen was converted into a visual image on the surface of a CdWO₄ scintillator that was magnified using a microscopic objective lens before being captured with a digital charge‐coupled‐device camera. Various changes in the joint microstructure, including cartilage destruction, periosteal born formation, articular bone thinning and erosion, marrow invasion by pannus progression, and widening joint space, were clearly identified at each level of arthritis severity with an equivalent pixel size of 2.7 µm. These high‐resolution features of destruction in the CIA models have not previously been available from any other conventional imaging modalities except histological light microscopy. However, thickening of the synovial membrane was not resolved in composite images by the SR refraction imaging method. In conclusion, in vivo SR X‐ray microscopic imaging may have potential as a diagnostic tool in small animals that does not require a histochemical preparation stage in examining microstructural changes in joints affected with arthritis. The findings from the SR images are comparable with standard histopathology findings.     

Preparation and characterization of chitosan-clay nanocomposites with antimicrobial activity

Chitosan-montmorillonite nanocomposites were prepared by an ion exchange reaction between water soluble oligomeric chitosan and a Na⁺-montmorillonite. The chitosan-montmorillonite nanocomposites were rapidly prepared within 1 h due to the high affinity between the chitosan and the montmorillonite clay host. The basal spacings of the composites were in a range of 14.5-19.6 Å depending on the mixing ratio of chitosan to clay. According to the thermogravimetric analysis (TG) and powder X-ray diffraction analysis the thermal stability of chitosan was remarkably improved in the interlayer space due to the strong electrostatic interaction of cationic chitosan molecules with anionic silicate layers. From the antimicrobial activity test it was found that the nanocomposites showed a synergistic effect in the antimicrobial activity against to Escherichia coli and Staphylococcus aureus.     

The effect of flux materials on the physical and optical properties of Eu-activated yttrium oxide phosphors

A flux fusion method was used to obtain the various sizes of Eu³⁺-activated Y₂O₃ red phosphors. The flux material was selected as an independent variable to control the physical properties of phosphor particles and their effects on the morphology and size distribution of phosphors were examined by scanning electron microscopy. The concentration of the flux materials and synthetic temperature were optimized for maximal photoluminescence intensity. Fluoride-based flux materials were found to work for the crystal formation of Eu³⁺-activated Y₂O₃. In particular, when a BaF₂ flux was used during the reaction at 1450 °C for 3 h, the photoluminescence (PL) intensity of Eu³⁺-activated Y₂O₃ was 25% higher than that without a flux and spherical phosphors had a mean particle size of 4-5 μm. The morphology and size distribution of the synthesized Eu³⁺-activated Y₂O₃ phosphor were predominantly dependent upon the type and concentration of flux material and synthetic temperature.     

Efficient prediction of the quality factors of micromechanical resonators

A high quality factor (Q-factor) is one of the major requirements of high-performance resonators. An understanding of the dissipation mechanism is crucial for maximizing the quality factor by reducing the energy loss. Thermoelastic damping has been well-known as the important intrinsic dissipation that affects the quality factor of micro-resonators. In this study, a finite element formulation based on the weak form of fully coupled thermoelastic problems is suggested. The coupled thermoelastic equation usually leads to a large-size complex eigenvalue problem, which is very massive and time-consuming to solve. Therefore, we also applied the model order reduction (MOR) scheme to this coupled multiphysical problem in order to achieve computational efficiency. The present approach is validated by comparing the numerical results and analytical solutions.     

First measurement of inclusive B→Xsη decays

We report a first measurement of inclusive B→Xsη decays, where Xs is a charmless state with unit strangeness. The measurement is based on a pseudoinclusive reconstruction technique and uses a sample of 657×10(6)BB pairs accumulated with the Belle detector at the KEKB e+e- collider. For MXs < 2.6 GeV/c2, we measure a branching fraction of [26.1±3.0(stat)-2.1+1.9(syst)-7.1+4.0(model)]×10(-5) and a direct CP asymmetry of ACP=-0.13±0.04-0.03+0.02. Over half of the signal occurs in the range MXs > 1.8 GeV/c2.