高压下受限齿轮油成膜特性研究

本文揭示了在实际应用中极端工况下齿轮油的润滑特性.为了测量在高接触压力和不同温度条件下齿轮油的成膜能力,制作了高精度的膜厚测量仪,采用相对光强法实现纳米级膜厚测量.试验中共采用了5种性质不同的齿轮油,在纯滚动条件下测量接触区的油膜厚度,结果表明：随着接触压力的升高油膜厚度明显降低,但压力对润滑状态影响不大;温度的改变不但能影响油膜厚度,对润滑状态的影响也很明显;GL-5 85W/190和GL-5 85W/90齿轮油在接触压力达3 GPa温度提高到120℃时仍能形成很厚的油膜,但其余3种润滑剂在极端工况下成膜能力不足.本文最后根据试验结果还提出了含有丰富添加剂的齿轮油润滑模型.     

厚壁管道周向导波检测技术实验研究

厚壁管道是火电机组四大管道系统的核心部件,将超声导波技术应用于厚壁管道的无损检测显得十分重要.首先确定厚壁管道检测的激励方式,优化选取适合厚壁管道检测的0.5MHz探头和楔形块角度为60°的斜探头组合.通过改变斜探头与外壁轴向缺陷之间周向距离,在一定范围内仍可检测到缺陷回波,且接收到的周向回波幅值变化不大,表明周向导波...     

Synthesis and Structure–Activity Relationship Studies of Benzimidazole-4,7-dione-Based P2X3 Receptor Antagonists as Novel Anti-Nociceptive Agents

P2X3 receptors (P2X3R) are ATP-gated ion channels predominantly expressed in C- and Aδ-fiber primary afferent neurons and have been introduced as a novel therapeutic target for neurological disorders, including neuropathic pain and chronic cough. Because of its localized distribution, antagonism of P2X3R has been thoroughly considered, and the avoidance of issues related to CNS side effects has been proven in clinical trials. In this article, benzimidazole-4,7-dione-based derivatives were introduced as a new chemical entity for the development of P2X3R antagonists. Starting from the discovery of a hit compound from the screening of 8364 random library compounds in the Korea Chemical Bank, which had an IC₅₀ value of 1030 nM, studies of structure–activity and structure–property relationships enabled further optimization toward improving the antagonistic activities as well as the drug’s physicochemical properties, including metabolic stability. As for the results, the final optimized compound 14h was developed with an IC₅₀ value of 375 nM at P2X3R with more than 23-fold selectivity versus P2X2/3R, along with properties of metabolic stability and improved solubility. In neuropathic pain animal models evoked by either nerve ligation or chemotherapeutics in male Sprague-Dawley rats, compound 14h showed anti-nociceptive effects through an increase in the mechanical withdrawal threshold as measured by von Frey filament following intravenous administration.     

Surface-enhanced Raman scattering of nucleic acid components in silver sol: Uracil and its derivatives

The surface-enhanced Raman scattering (SERS) of uracil, uridine, 2′-deoxyuridine and 5′-rUMP adsorbed on aqueous silver sol was investigated. Uracil was found to adsorb as the N-3 deprotonated form, which underwent a reorientation from the situation where the base was perpendicular to the surface to the situation where the base lay flat on the surface as the surface charge was made more negative. The N-3 deprotonated molecules of uridine, 2′-deoxyuridine and 5′-rUMP were found to lie flat on the silver surface regardless of the bulk concentration and the silver surface charge.     

主成分分析排序和模糊线性判别分析的生菜近红外光谱分类

贮存时间是影响生菜品质的一项重要因素,传统的贮存时间鉴别方法主要依靠人工经验,但是这种方法的准确率和可信度并不高。研究的目标是建立一种基于模糊识别的模型进行生菜光谱分析以实现生菜贮存时间的鉴别,并与其他鉴别方法作比较。为此,在当地超市购买60份新鲜生菜样品,存放于冰箱中待用。首先,通过AntarisⅡ近红外光谱检测仪采集生菜样品的近红外光谱数据,每隔12小时检测一次,每个样本检测重复三次,并取三次平均值作为实验数据。其次,利用多元散射校正(MSC)减少近红外光谱中的冗余信息。为了进一步去除近红外光谱中的无用信息以及简化随后的数据分类过程,分别运用主成分分析(PCA)和排序主成分分析(PCA Sort)。其中,PCA Sort通过改进对主成分的排序方法能提高分类准确率,同时便于模糊线性鉴别分析(FLDA)进一步提取特征。PCA和PCA Sort的计算仅运用了前15个主成分(能充分反映光谱的主要信息)。最后,利用模糊线性鉴别分析算法(FLDA)和K近邻算法(KNN)进一步分类所得的低维数据。基于PCA和KNN算法的模型鉴别准确率达到43%,而基于PCA, FLDA和KNN算法的模型鉴别准确...     

高压换流站交流滤波器组相干噪声源声功率反演

针对高压换流站内交流滤波器组相干噪声源的声功率难以确定的问题,该文提出了一种基于几何声学理论的声功率反演方法。该方法采用可同时考虑噪声源强度和相位的几何声学理论建立相干声场模型,在此基础上构建声功率反演模型,通过寻找使声学模型输出和实测数据差异最小的声源参数(强度和相位),实现了对相干噪声源声功率的反演。数值仿真和实验数据验证了该方法的有效性。     

掺杂稀土铁磁性纳米复合粉体的制备

采用水热法以FeCl2和KOH为原料制备Fe3 O4粉体,以氧化钇、氧化铕和氧化铽为原料制备Y2 O3:1;Eu3+,5;Tb3+粉体,然后以Fe3 O4粉体,Y2 O3:1;Eu3+,5;Tb3+粉体和三聚氰胺为原料,采用微波烧结法在Ar气气氛下制备FeYO3/Y2 O3:1;Eu3+,5;Tb3+复合粉体,利用XRD衍射仪对各种粉体的结构进行分析,利用扫描电镜对复合粉体的形貌进行观察,并利用振动样品磁强计对复合粉体的磁学性能进行研究.结果表明:复合粉体均呈针状,长度和细度均为纳米级.当Fe3 O4,Y2 O3:1;Eu3+,5;Tb3+和三聚氰胺比例为1:3:4时,所制备的FeYO3/Y2 O3:1;Eu3+,5;Tb3+粉体磁力最强,磁力饱和强度为11.3 emu·g-1.     

浸渍吸附法制备Ag-SiO2纳米复合抗菌材料的条件优化

运用浸渍吸附法制备了纳米级单分散Ag-SiO2无机复合抗菌材料,结合响应曲面方法,考察了Ag+浓度、反应时间和氨水添加量等因素对材料抗菌率的影响,考虑到材料制备成本,变色控制等多方面因素,选取了最优制备条件,实验结果表明:Ag+浓度为5.9×10-4 mol·L-1,氨水添加量为4.1 mL,反应时间为5.2 h时,材料有最佳的经济效益和抗菌性能,抗菌率达到91.7;.通过TEM、XRD、ICP和BET方法对材料的结构进行表征,结果表明:载体SiO2微球为无定形态;Ag-SiO2抗菌材料微球具有良好的分散性和稳定性,粒径尺寸均匀;Ag+成功负载于SiO2微球表面,负载量为8.10 mg·kg-1.     

集值均衡问题近似Benson真有效解的非线性刻画

在一般的数学模型中,由于要忽略一些次要因素,所建的模型往往是近似的,且对数学模型利用数值算法所求得的解大多是近似解。另一方面,在可行集非紧的情况下,精确解的解集往往是空集,而在较弱的条件下近似解集可以是非空的。在Hausdorff局部凸拓扑线性空间中分别研究了无约束和带约束集值均衡问题近似Benson真有效解。在没有任何凸性假设下,利用非线性泛函分别建立了最优性条件。