Zwei neue pentacyclische dimere des cycloheptatriens

Titanium - catalyzed dimerization of cycloheptatriene affords pentacyclo[7.5.0.0^2,8.0^5,14.0^7,11]tetradeca-3,12-diene, $\text{3}$, and pentacyclo[8.4.0.0^3,7.0^4,14.0^6,11]tetradeca-8,12-diene, $\text{4}$. By heating, $\text{3}$ is converted quantitatively into $\text{4}$.     

Comparative thermal analysis of commercial and low-grade bauxites

This paper presents qualitative and quantitative comparative results on the simultaneous TG-DTG DTA of five commercial and low-grade bauxites. The methodology of qualitative determination of the basic mineral forms contained in bauxites is currently being established. The weight losses relating to the steps in the TG curve allow determination of the contents of the basic minerals in bauxite. These are recalculated as percentages of Al₂O₃, SiO₂, CaO moisture and total volatiles. The final results are in accordance with the results of classical chemical analyses, and this jusitifies the use of this technique as a quick method for qualitative and quantitative determinations of both commercial and low-grade bauxites.

---

Zusammenfassung Qualitative und quantitative Ergebnisse vergleichender simultaner TG-DTG-DTA-Untersuchungen an 5 kommerziellen und geringwertigen Bauxiten werden vorgestellt. Die Methodologie der qualitativen Bestimmung der wichtigsten im Bauxit enthaltenen Minerale wird ausgearbeitet. Die Gewichtsverluste bei den entsprechenden TG-Stufen erlauben die Berechnung der Gehalte an den wichtigsten Mineralen. Diese werden umgerechnet in die Anteile an Al₂O₃, SiO⁰², CaO, Feuchtigkeit und Glühverlust. Letztere Resultate stimmen mit denen klassisch-chemischer Analyse überein. Das erlaubt die Anwendung thermoanalytischer Methoden als Schnellverfahren für qualitative und quantitative Bestimmungen in kommerziellen und geringwertigen Bauxiten.

---

, . , . , , , . , , .

     

Determination of Mn,Fe, Cu,Zn, and Pb in particulate matter,raw and final materials of a brick factory by radionuclide X-ray fluorescence analysis

Radionuclide X-ray fluorescence method with a Si/Li semiconductor detector and²³⁸Pn exciting source was used in the study of Mn, Fe, Cu, Zn, and Pb content of solid emissions, raw and final materials of a brick factory. From the point of view of metal content, the working environment of the brick factory is safe for workers.     

Investigation of changes in catalyst for conversion by means of steam during use in an industrial reactor

A study was made of the changes in the active component of a commercial catalyst for methane reforming by means of steam, as a function of its duration of use and of its position in an industrial reactor. The samples for examination were taken after 3, 8, 9 and 20 months of catalyst use, and from seven different levels in the reformer tube, ranging from the top to the bottom.DTA, TG, IR spectroscopy, X-ray diffraction and surface area determination were used to follow the catalyst changes.

---

Zusammenfassung Veränderungen der aktiven Komponente eines kommerziellen Katalysators zur Methanreformierung mittels Wasserdampf wurden in Abhängigkeit von der Betriebsdauer und der Lage im industriellen Reaktor untersucht. Proben für die Untersuchung wurden nach 3-, 8-, 9- und 20-monatiger Betriebsdauer aus 7 verschiedenen Höhen vom Boden bis zum Kopf des Reformer-Rohres entnommen. Veränderungen des Katalysators wurden mittels DTA, TG, IR-Spektroskopie, Röntgendiffraktometrie und Oberflächenmessungen verfolgt.

---

, - , @2 . 3, 8, 9 20 -, -. , , , , , .

     

Coagulation of silver halide sols by thorium nitrate in the presence of potassium nitrate and potassium sulfate

Summary When silver iodide, silver bromide and silver chloride solsin statu nascendi are coagulated by thorium nitrate in the presence of potassium nitrate, three coagulation maxima appear. Two of them are identical with maxima that are found in absence of KNO₃, denoted with (II) and (IV) in fig. 1. The new maximum appears in the stability region of recharged sols (III). It is believed that this maximum is also—as maximum (IV)—caused by the coagulation of recharged silver halide sols by nitrate ions. Appearance of two nitrate coagulation maxima is explained by different charge densities on sol particles at various concentrations of Th(NO₃)₄ where they are formed. The new maximum indicates a lower charge density of sol particles. The possibility that the new maximum could have been caused by ionic complex species between thorium and nitrate ions has been rejected for data are available that the equilibrium constant for such complexes is small. In the presence of K₂SO₄ the coagulation effects of thorium nitrate on silver halide sols are markedly different. In acidified solutions only one coagulation maximum appears at rather high thorium nitrate concentrations [∼ 10⁻³ N Th (NO₃)₄] and the sol remains negatively charged [up to ∼ 10⁻² N Th (NO₃)₄] This is explained by complex formation of Th-ions and sulfate ions whereby ionic species of lower charge are formed, which exert a weaker coagulation effect. In neutral solutions another maximum at lower concentration of Th (NO₃)₄ is formed which appears to be the usual coagulation maximum produced by hydrolyzed thorium ions. The antagonistic effects of the salt pair Th (NO₃)₄-K₂SO₄ upon the coagulation of silver halides has been discussed and we have concluded that the large effects repeatedly reported can be explained not by simple electrostatic effects of ions in solution but rather by the formation of complexes between Th- and SO₄-ions.

---

Zusammenfassung Die Koagulationseffekte des Thoriumnitrats in Anwesenheit von Kaliumnitrat und Kaliumsulfat an Silberhalogenid-Solenin statu nascendi wurden ausführlich untersucht. Wenn Silberhalogenid-Sole durch Thoriumnitrat-L?sungen koaguliert werden, bilden sich zwei Koagulationsmaxima (II und IV, Abb. 1). Bei sehr niedrigen Konzentrationen des Thoriumnitrats koaguliert das Thorium-Ion (oder Komplex) die negativen Silberhalogenid-Sole, w?hrend bei h?heren Thoriumnitrat-Konzentrationen die ungeladenen Sole durch die NitratIonen koaguliert werden. Zwischen den zwei Maxima besteht ein weites Gebiet der stabilen umgeladenen Sole (III). Unter dem Zusatz von konstanten Mengen des Kaliumnitrats wird in diesem Gebiet ein neues (drittes) Maximum gebildet (Abb. 2–5), das auch als Koagulationsmaximum identifiziert wurde. Es wird angenommen, da? dieses Maximum wieder eine Koagulation der umgeladenen Silberhalogenid-Sole durch Nitrat-Ionen darstellt. Das Auftreten von zwei Koagulationsmaxima, verursacht durch Nitrat-Ionen, wird durch die verschiedenen Ladungsdichten an Solteilchen in Gebieten der Thoriumnitrat-Konzentrationen, in denen Maxima erscheinen, erkl?rt. Die M?glichkeit eines Koagulationseffektes der komplexen Ionen zwischen Thorium und Nitrat wurde ausgeschlossen, da die Gleichgewichtskonstante solcher Komplexe ziemlich niedrig ist. In Anwesenheit von Kaliumsulfat sieht die Koagulationskurve für Silberhalogenid Sole sehr unterschiedlich aus (Abb. 6–8). In den mit Salpeters?ure (0,001N) versetzten Solen erscheint nur ein Maximum bei ziemlich hohen Thoriumnitrat-Konzentrationen [∼ 10⁻³ N Th (NO₃)₄], wobei die Solteilchen noch immer negativ sind. Da Thorium- und Sulfat-Ionen sehr stabile Ionen-Komplexe bilden, die eine niedrigere Valenz aufweisen, kann das Maximum als Folge der Koagulationseffekte solcher Komplexe an die Silberhalogenid-Sole angesehen werden. In neutralen L?sungen zeigt sich neben dem beschriebenen Maximum noch ein anderes Maximum bei niedrigerer Thoriumnitrat-Konzentration. Dieses Maximum, hervorgerufen durch die hydrolysierten Thorium-Ionen, scheint das „normale“ Koagulationsmaximum zu sein. Dieantagonistischen Effekte des Salzpaares Th (NO₃)₄-K₂SO₄ bei der Koagulation der Silberhalogenide wurden diskutiert, und es wurde geschlossen, da? die gro?en Effekte, die wiederholt ver?ffentlicht worden waren, sehr schwer nur durch die elektrostatischen Anziehungen zwischen den Ionen erkl?rt werden k?nnen. Die Komplexbildung zwischen Thorium- und Sulfat-Ionen wird für den sogenannten antagonistischen Effekt in diesem Falle als verantwortlich angesehen.

---

---

Supported in part by U.S. Atomic Energy Commission Contract No. AT (30-1)-1801.     

Electrochemical deposition of copper on steel from a solution of diacido-1,3-propylenediamine-N,N′-diacetato-N,N′-dipropionate cuprate(II)

The possibility of obtaining smooth homogeneous copper coatings with good adhesion and homogeneous copper coatings with poor adhesion by electrochemical deposition of copper on steel from a solution of nontoxic copper(II) complex with the ligands, 1,3-propylenediamine-N,N′-diacetato-N,N′-di-3-propionic acid, was analyzed. For both types of coatings, the optimum composition of the solution and the optimum deposition conditions were determined.     

Bis(PheOH) maleic acid amide-fumaric acid amide photoizomerization induces microsphere-to-gel fiber morphological transition: the photoinduced gelation system

The photoinduced gelation system based on 1 (non-gelling) to 2 (gelling) molecular photoisomerization in water results by microspheres (1) to gel fibers (2) transformation at the supramolecular level.     

Modification of solids with volatile organics III: Natural zeolites

Summary The effect of pre-adsorbed benzene and ethanol on the adsorptive properties of natural zeolite (clinoptilolite) has been studied by gas-solid chromatography. It has been shown that modification of the solid surface by volatile organics has a significant influence on the adsorptive properties. The modification is of the same order as the more difficult modification by inorganics, as illustrated here by clinoptilolite modification with Co²⁺. Energy distribution of surface adsorptive sites appears to be continuous and confirms previous finding that only a small proportion of active sites is responsible for most adsorbate retention. Part II reference [4]     

Flow injection analysis for calcium in serum,water and waste waters by spectrophotometry and by ion-selective electrode

The Flow Injection technique is shown to provide fast, reliable and sensitive methods for the determination of calcium in various aqueous as well as serum samples; spectrophotometric or potentiometric detection can be used. At sampling rates of 100–110 samples per hour, with 30-μl sample injections, high reproducibility of measurement and low reagent consumption are achieved in both methods. In the spectrophotometric method, the analytical readout is available within 12 s after sample injection at a total reagent consumption of 0.75 ml per analysis. The potentiometric measurement of the calcium activity in serum is placed on a reliable basis by alternating measurements of serum samples and aqueous standards without incurring any non-reproducible changes in potential between aqueous and serum solutions. This permits the simultaneous determination of pH and pCa, the analytical readout being available within XXX s of sample injection. The good agreement between the results obtained with the Flow Injection method and those attained by atomic absorption and EDTA titrations as well as pCa stat-measurements show that the new methods are potentially suitable for routine analysis.     

Hybridization in some macrocyclic polyacetylenes

The hybridization in several cyclic polyacetylene compounds has been calculated by the maximum overlap method, assuming planar and non-planar geometries of the molecules. In the planar configuration the hybrids describing the molecular skeleton deviate from the corresponding bond directions. We have a few “bent” bonds, but in contrast to the situation in small rings, here the deviation angles are negative, i.e., the hybrids point toward the inside of the ring. Non-planar structures in which acetylene groups are kept in a plane and CCH₂ or CH₂ groups are displaced out of the plane show less deviation from the bond directions of bent bonds. Furthermore, the deviation angles decrease with an increase in the out-of-plane displacement of methylene groups. Finally, when the angle of bending of the molecules approaches 50°, the deviation vanishes, predicting a puckered conformation for the molecules. Correlation between CC stretching vibration frequencies and the corresponding CC bond overlap is discussed.