Simultaneous determination of hyoscine butylbromide and ketoprofen in pharmaceutical preparations by spectrophotometric and liquid chromatographic methods

A binary mixture of hyoscine butylbromide and ketoprofen was determined by 4 different methods. The first involved determination of hyoscine butylbromide and ketoprofen using the ratio-spectra first-derivative spectrophotometric technique at 211 and 234 nm over the concentration ranges of 2-14 and 5-45 microg/mL with mean accuracies 99.84 +/-0.92 and 99.98+/- 0.64%, respectively. The second method utilized second-derivative spectrophotometry over the concentration ranges of 2-14 and 5-35 microg/mL with mean accuracies 99.32+/- 1.06 and 99.55+/-1.15%, respectively. The third method was based on the resolution of the 2 components by bivariate calibration depending on a simple and rapid mathematical algorithm and quantitative evaluation of the absorbances at 206 and 254 nm over concentration ranges of 2-16 and 5-35 microg/mL; mean accuracies of 100.21+/-1.30 and 100.19 +/-1.07% were obtained for hyoscine butylbromide and ketoprofen, respectively. The fourth method was reversed-phase liquid chromatography using 0.05 M ammonium dihydrogen phosphate-acetonitrile-methanol (20 + 30 + 6, v/v) as the mobile phase with ultraviolet detection at 220 nm over concentration ranges of 1-90 and 5-70 microg/mL; mean accuracies were 99.92+/-1.02 and 99.61+/- 0.98%, respectively. The suggested procedures were checked using laboratory-prepared mixtures and were successfully applied for the analysis of pharmaceutical preparations. The methods retained their accuracy and precision when the standard addition technique was applied. The results obtained by applying the proposed methods were statistically analyzed and compared with those obtained by the manufacturer's method.     

Preparation and properties of methoxycarbonylsulfenyl isocyanate, CH(3)OC(O)SNCO

Pure methoxycarbonylsulfenyl isocyanate, CH3OC(O)SNCO, is quantitatively prepared by the metathesis reaction between CH3OC(O)SCl and AgNCO. This novel species has been obtained in its pure form and characterized by 1H and 13C NMR, UV-vis, FTIR, and FT-Raman spectroscopy. The conformational properties of the gaseous molecule have been studied by vibrational spectroscopy and quantum chemical calculations (B3LYP and MP2 methods). The compound exhibits a conformational equilibrium at room temperature having the most stable form CS symmetry with the C=O double bond synperiplanar with respect to the S-N single bond. A second form was observed in the IR spectrum and corresponds to a conformer possessing the C-S bond antiperiplanar with respect to the N=C double bond of the isocyanate group. The structure of a single crystal of CH3OC(O)SNCO was determined by X-ray diffraction analysis at low temperature using a miniature zone melting procedure. The crystalline solid (triclinic, P1, a = 8.292(6) A, b = 9.839(7) A, c = 11.865(8) A, alpha = 67.290(2) degrees , beta = 71.5570(10) degrees , gamma = 83.4850(10) degrees and Z = 6) shows the presence of molecules having exclusively a synperiplanar conformation with respect to the three phi(CO-C=O), phi(O=C-SN), and phi(CS-N=C) dihedral angles.     

Covalently immobilized porphyrins as photooxidation catalysts

Porphyrins covalently linked to aminomethylated Merrifield polymers, by chlorosulfonation activation of the porphyrin nucleus, are able to generate singlet oxygen with an efficiency which is related to the spacer between porphyrin and the polymer backbone. Juglone and ascaridole are efficiently produced in the presence of these supported catalysts.     

Molecular Recognition of Amino Acids by Copper(II) Complexes of 6(A),6(X)-Diamino-6(A),6(X)-dideoxy-beta-cyclodextrin (X = B, C, D)

The three regioisomers of beta-cyclodextrin 6-difunctionalized with NH(2) groups (6(A),6(X)-diamino-6(A),6(X)-dideoxy-beta-cyclodextrin, A,X-CDNH(2), X = B, C, or D) were synthesized. Their binary and ternary copper(II) complexes with amino acids were characterized by ESR and electronic spectroscopy. Furthermore, the binary copper(II) complexes were used as eluent in ligand exchange chromatography (LEC), to resolve racemates of unmodified amino acids. HPLC separation of enantiomers of aromatic amino acids was obtained only when the complex [Cu(A,B-CDNH(2))](2+) was used as eluent. The two complexes with the other two regioisomers did not show chiral recognition ability. Circular dichroism (c.d.) spectroscopy studies of the ternary complexes with D- and L-amino acids carried out in the presence and in the absence of 1-adamantanol, suggested a recognition mechanism that involves the cyclodextrin cavity, only in the case of ternary A,B-CDNH(2) complexes.     

Excited states quenching of phenosafranine dye by electron donors

The quenching of the excited singlet and triplet states of phenosafranine by aromatic amines, methoxybenzenes and triethanolamine was investigated in acetonitrile and methanol. The rate constants for the aromatic quenchers present a typical dependence of an electron transfer process with the one-electron redox potential of the donor. A Rehm–Weller correlation is obtained with the driving force. The fitting parameters are very similar in both solvents. The electron transfer nature of the quenching reaction is further confirmed by the detection of the radical cations of the quenchers and the semireduced form of the dye in laser flash photolysis experiments. The absorption coefficients of the transient species were estimated, and the quantum yield of the charge separation process was determined.     

First aldehyde-functionalized poly(2-oxazoline)s for chemoselective ligation

A protected aldehyde-functionalized 2-oxazoline, 2-[3-(1,3)-dioxolan-2-ylpropyl]-2-oxazoline (DPOx), was synthesized from commercially available compounds in high yields. The polymerization of DPOx with different initiators proceeds via a living ionic mechanism; thus, the polymers were of low polydispersity and the degree of polymerization could be precisely adjusted. Copolymerization with 2-methyl-2-oxazoline gave water-soluble statistical copolymers. Hydrolysis of the homo- and copolymers resulted in well-defined, aldehyde-bearing poly(2-oxazoline)s. The aldehyde side functions reacted quantitatively with an amino-oxy compound to form the corresponding oxime.     

Comparative study of amidase production by free and immobilized Escherichia coli cells

Escherichia coli NCIM 2569 was evaluated for its potential for amidase production under submerged fermentation. Among the various amide compounds screened, maximum substrate specificity and enzyme yield (8.1 U/mL) were obtained by using 1% acetamide. Fermentation was carried out at 30°C in shake-flask culture under optimized process conditions. A maximum of 0.52 U/mL of intracellular amidase activity was also obtained from cells incubated for 24 h. Studies were also performed to elucidate the optimal conditions (gel concentration, initial biomass, curing period of beads, and calcium ion concentration in the production medium) for immobilization of whole cells. By using E. coli cells entrapped in alginate, a maximum of 6.2 U/mL of enzyme activity was obtained after 12 h of incubation under optimized conditions. Using the immobilized cells, three repeated batches were carried out successfully, and 85% of the initial enzyme activity was retained in the second and third batches. The study indicated that the immobilized E. coli cells offered certain advantages such as less time for maximum enzyme production, more stability in the enzyme production rate, and repeated use of the biocatalyst.     

Photoinduced DNA cleavage and cellular damage in human dermal fibroblasts by 2,3-diaminophenazine

Aromatic amines, such as o-phenylenediamine (OPD), have been used extensively in commercial hair dyes and in the synthesis of agricultural pesticides. Air oxidation of OPD results in the formation of 2,3-diaminophenazine (DAP). Although the mutagenic toxicity of DAP has been shown in both prokaryotic and eukaryotic systems, its phototoxicity remains largely unexplored. This study focuses on the pH-dependent photophysical properties of DAP and demonstrates its ability to photoinduce DNA damage to pUC19 plasmid in vitro. The photocytotoxicity of DAP toward human skin fibroblasts was also measured. DAP exhibits weak intercalative binding to double-stranded DNA with a binding constant K(b) = 3.5 x 10(3) M(-1). Furthermore, upon irradiation with visible light, DAP is able to nick plasmid DNA in the presence of oxygen. The concentration of DAP that resulted in 50% cell death was 172 +/- 9 microM in the dark and 13 +/- 1 microM after irradiation of the DAP-treated cell cultures with visible light (400-700 nm, 30 min, 5 J/cm(2)). The 13-fold increase in toxicity upon exposure to visible light shows the need for further study of the photocytotoxicity of contaminants such as DAP.